Hpe resource definitions of iLO 5 v3.04


Description	Issuer of the installed CRL, if present.
Type	string or null
Read Only	True
Added	iLO 5 1.10

CRLSerial


Description	Serial Number of the installed CRL, if present.
Type	string or null
Read Only	True
Added	iLO 5 1.10

CertificateLoginEnabled


Description	Specifies whether Certificate login is enabled.
Type	boolean
Read Only	False
Added	iLO 5 1.10

LDAPCertificateNameMapping


Description	The method used to map a certificate to its associated LDAP user account.
Type	string
Read Only	False
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`SubjectCN`	The CN portion of the certificate subject will be used as the LDAP username.
`SubjectDN`	The fully qualified DN of the certificate subject will be used as the LDAP username.
`SANRFC822`	The RFC822 name from the certificate's subjectAlternativeName extension will be used as the LDAP username.
`SANUPN`	The UserPrincipalName from the certificate's subjectAlternativeName extension will be used as the LDAP username.

OCSPUri


Description	URL to use for OCSP certificate checking.
Type	string or null
Read Only	False
Added	iLO 5 1.15
Format	uri-reference

StrictCACModeEnabled


Description	Whether or not Strict CAC Mode is enabled.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Actions

HpeCertAuth.DeleteCRL Member of HpeCertAuth.v1_1_0.HpeCertAuth Remove an installed Certificate Revocation List (CRL).

There are no parameters for this action.

HpeCertAuth.ImportCACertificate Member of HpeCertAuth.v1_1_0.HpeCertAuth Imports a Trusted Certificate

Parameters:

Certificate (string)

Contains PEM formatted X509 certificate or PKCS7 certificate chain (Base64 encoded).

HpeCertAuth.ImportCRL Member of HpeCertAuth.v1_1_0.HpeCertAuth Imports a Certificate Revocation List (CRL).

Parameters:

ImportUri (string)

Contains URI of PEM formatted certificate revocation list (CRL) (Base64 encoded).

HpeCertificate

@odata.type: "#HpeCertificate.v1_0_0.HpeCertificate"

The HpeCertificate resource describes an X509 certificate.

This resource type was added in iLO 5 1.20

Resource Instances

Uri	HTTP Allow
`/redfish/v1/eventservice/cacertificates/{item}`	GET DELETE
`/redfish/v1/managers/{item}/securityservice/certificateauthentication/cacertificates/{item}`	GET DELETE

Issuer


Description	The Certificate Authority that issued the certificate.
Type	string
Read Only	True
Added	iLO 5 1.10

SerialNumber


Description	The serial number that the Certificate Authority assigned to the certificate.
Type	string
Read Only	True
Added	iLO 5 1.10

Subject


Description	The entity to which the certificate was issued.
Type	string
Read Only	True
Added	iLO 5 1.10

ValidNotAfter


Description	The date on which the certificate validity period ends.
Type	string or null
Read Only	True
Added	iLO 5 1.10
Format	date-time

ValidNotBefore


Description	The date on which the certificate validity period begins.
Type	string or null
Read Only	True
Added	iLO 5 1.10
Format	date-time

HpeCertificateCollection

@odata.type: "#HpeCertificateCollection.HpeCertificateCollection"

A Collection of HpeCertificate resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/eventservice/cacertificates`	GET
`/redfish/v1/managers/{item}/securityservice/certificateauthentication/cacertificates`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeCertificate

Members (array)

Member of HpeCertificateCollection.HpeCertificateCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeCertificateCollection.HpeCertificateCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeCertificateCollection.HpeCertificateCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeComponent

@odata.type: "#HpeComponent.v1_0_1.HpeComponent"

The HpeComponent resource describes a software or firmware update component.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/componentrepository/{item}`	GET PATCH DELETE

Activates


Description	Indicates when a component becomes active after being updated.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Immediately`	The update activates immediately.
`AfterReboot`	The update activates after a host server reboot.
`AfterDeviceReset`	The update activates after a device reset.
`AfterHardPowerCycle`	The update activates after a full power supply disconnect or E-Fuse reset.

ComponentType


Description	HTTP-style content-type of binary
Type	string
Read Only	True
Added	iLO 5 1.10

ComponentUri


Description	URI of the component binary.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	uri-reference

Configuration


Description	string defining customized parameters for some components provided by client at upload time and given to the component at execution time (Type D only).
Type	string
Read Only	False
Added	iLO 5 1.10

Created


Description	ISO 8601 time string indicating when this component was added to the NAND.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time


Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value
`Optional`
`Recommended`
`Critical`

DeviceClass


Description	Device type GUID from iLO secure flash header
Type	string
Read Only	True
Added	iLO 5 1.10

ExecutionParameters


Description	Client supplied execution parameters. These are supplied at upload time and given to the component at execution time (Type D only).
Type	string
Read Only	False
Added	iLO 5 1.10

Filename


Description	The unique filename of the component.
Type	string
Read Only	True
Added	iLO 5 1.10

Filepath


Description	Path of file on the USB LUN if you mount the repo as USB.
Type	string
Read Only	True
Added	iLO 5 1.10

Locked


Description	If true, this component cannot be removed with DELETE because it is referenced by an Install Set
Type	boolean
Read Only	True
Added	iLO 5 1.10

SizeBytes


Description	Size of the component file in bytes.
Type	integer or null
Read Only	True
Added	iLO 5 1.10

Targets (array)

Targets is an array containing elements of:


Description	Target GUIDs from secure flash header or sidecar file.
Type	string
Read Only	True

UpdatableBy (array)

UpdatableBy is an array containing elements of:


Description	Describes which types of update agents may apply this component.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`Uefi`	This component may be scheduled for update by UEFI BIOS.
`RuntimeAgent`	This component may be scheduled for update by a runtime update agent such as Smart Update Manager or Smart Update Tool.
`Bmc`	This component may be scheduled for update by iLO.

Version


Description	Version of the component from secure flash header or sidecar file.
Type	string
Read Only	True
Added	iLO 5 1.10

HpeComponentCollection

@odata.type: "#HpeComponentCollection.HpeComponentCollection"

A Collection of HpeComponent resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/componentrepository`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeComponent

Members (array)

Member of HpeComponentCollection.HpeComponentCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeComponentCollection.HpeComponentCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeComponentCollection.HpeComponentCollection


Description	The total number of collection members.
Type	integer
Read Only	True

Oem.Hpe.ComponentCount

Member of HpeComponentCollection.HpeComponentCollection


Description	The number of files reported.
Type	integer or null
Read Only	True
Added	iLO 5 1.10

Oem.Hpe.FreeSizeBytes

Member of HpeComponentCollection.HpeComponentCollection


Description	The available repository space in bytes.
Type	integer or null
Read Only	True
Added	iLO 5 1.10

Oem.Hpe.TotalSizeBytes

Member of HpeComponentCollection.HpeComponentCollection


Description	The total repository size in bytes.
Type	integer or null
Read Only	True
Added	iLO 5 1.10

HpeComponentInstallSet

@odata.type: "#HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet"

The HpeComponentInstallSet resource describes an Install Set, an ordered list of installation instructions that may be invoked.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/installsets/{item}`	GET POST PATCH DELETE

Created

Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet


Description	ISO-time of install set creation.
Type	string or null
Read Only	True
Added	iLO 5 1.10
Format	date-time

IsRecovery

Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet


Description	If true, this install set is reserved to hold only critical firmware recovery updatable by iLO. Additionally the 'Administrate Recovery Set' iLO privilege is required to modify or remove this install set.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Modified

Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet


Description	ISO-time of install modification.
Type	string or null
Read Only	True
Added	iLO 5 1.10
Format	date-time

Sequence (array)

Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet

Sequence is an array containing elements of:

Sequence[{item}].Command Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet


Description	Command to execute.
Type	string
Read Only	False
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`ApplyUpdate`	Apply an update using the specified component.
`ResetServer`	Reset the server.
`ResetBmc`	Reset the BMC.
`Wait`	Wait for the WaitTimeSeconds number of seconds.
`BootToUefi`	Boot the server to UEFI shell
`PendingReset`	Reset is pending after bundle update
`HostPoweroff`	Power off Host

Sequence[{item}].Component Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet


Type	string
Read Only	True
Added	iLO 5 1.10
Format	uri-reference

Sequence[{item}].ExecutionTimeoutMinutes Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet


Description	The number of minutes that this update will likely take to apply. Applies if the command is 'ApplyUpdate'. Ignored otherwise.
Type	integer
Read Only	False

Sequence[{item}].Filename Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet


Description	The unique filename of the component. This correlates to 'Filename' in the HpeComponent.
Type	string
Read Only	False
Added	iLO 5 1.10

Sequence[{item}].Targets (array) Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet

Targets is an array containing elements of:


Type	string
Read Only	True

Sequence[{item}].UpdatableBy (array) Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet

UpdatableBy is an array containing elements of:


Type	string
Read Only	False

The following are the supported values:

Value	Description
`Bmc`	This component may be scheduled for update by iLO.
`Uefi`	This component may be scheduled for update by UEFI BIOS.
`RuntimeAgent`	This component may be scheduled for update by a runtime update agent such as Smart Update Manager or Smart Update Tool.

Sequence[{item}].WaitTimeSeconds Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet


Description	The number of seconds to pause if the command is 'Wait'. Ignored otherwise.
Type	integer
Read Only	False
Added	iLO 5 1.10

Actions

HpeComponentInstallSet.Invoke Member of HpeComponentInstallSet.v1_4_0.HpeComponentInstallSet

Parameters:

ClearTaskQueue (boolean)

Previous items in the task queue can be cleared before the Install Set is invoked

HpeComponentInstallSetCollection

@odata.type: "#HpeComponentInstallSetCollection.HpeComponentInstallSetCollection"

A Collection of HpeComponentInstallSet resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/installsets`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeComponentInstallSet

Members (array)

Member of HpeComponentInstallSetCollection.HpeComponentInstallSetCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeComponentInstallSetCollection.HpeComponentInstallSetCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeComponentInstallSetCollection.HpeComponentInstallSetCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeComponentUpdateTask

@odata.type: "#HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask"

The HpeComponentUpdateTask resource describes an Update Task, an element in the update task queue. This represents an install instruction.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/updatetaskqueue/{item}`	GET PATCH DELETE

Command

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	Command to execute.
Type	string
Read Only	False
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`ApplyUpdate`	Apply an update using the specified component.
`ResetServer`	Reset the server.
`ResetBmc`	Reset the BMC.
`Wait`	Wait for the WaitTimeSeconds number of seconds.
`PendingReset`	Reset is pending after bundle update.

Component

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Type	string
Read Only	True
Added	iLO 5 1.10
Format	uri-reference

Created

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	ISO-time of task creation (by whomever created this thing)
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time

ExecutionTimeoutMinutes

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	The number of minutes that this update will likely take to apply. Applies if the command is 'ApplyUpdate'. Ignored otherwise.
Type	integer
Read Only	False

Expire

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	ISO 8601 Redfish-style time string after which we will automatically change state to Expired - null for no expire time
Type	string
Read Only	False
Added	iLO 5 1.10
Format	date-time

Filename

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	The unique filename of the component. This correlates to 'Filename' in the HpeComponent.
Type	string
Read Only	False
Added	iLO 5 1.10

MaintenanceWindow

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	The maintenance window for this update task.
Type	string or null
Read Only	False
Added	iLO 5 1.30

Modified

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	ISO-time of last task queue item update by updater (not client)
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time

RecoveryPrivilege

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	This task was created by a user with Recovery Set privilege, and would allow a downgrade if 'DowngradePolicy' is set to 'RecoveryDowngrade'. Applies if the command is 'ApplyUpdate'. Ignored otherwise.
Type	boolean
Read Only	True
Added	iLO 5 1.40

Result

Result.MessageArgs (array) Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask

MessageArgs is an array containing elements of:


Type	string
Read Only	True

Result.MessageId Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	The key for this message that can be used to look up the message in a message registry.
Type	string
Read Only	False
Added	iLO 5 1.10

ResultLog

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	base64 encoded entry to capture component log. Estimated to be generally 1-2KB. written by updater
Type	string or null
Read Only	False
Added	iLO 5 1.10

StartAfter

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	ISO 8601 Redfish-style time string of earliest execution - null for no start time specified
Type	string
Read Only	False
Added	iLO 5 1.10
Format	date-time

State

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	The current state of the update task.
Type	string
Read Only	False
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Pending`	The task is pending execution.
`InProgress`	The task is executing.
`Complete`	The task was completed and the results are available in the Results.
`Expired`	The task will not execute because the current time is after the 'Expire' time.
`Exception`	The task was unsuccessful because of an exception condition.
`Canceled`	The task is no longer scheduled to run.

TPMOverride

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	If true then the TPMOverrideFlag is passed in on the associated flash operations.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Targets (array)

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask

Targets is an array containing elements of:


Type	string
Read Only	True

UpdatableBy (array)

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask

UpdatableBy is an array containing elements of:


Type	string
Read Only	True

The following are the supported values:

Value	Description
`Bmc`	This component may be scheduled for update by iLO.
`Uefi`	This component may be scheduled for update by UEFI BIOS.
`RuntimeAgent`	This component may be scheduled for update by a runtime update agent such as Smart Update Manager or Smart Update Tool.

UpdateRecoverySet

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	Update Recovery Set with this component if the command is 'ApplyUpdate'. Ignored otherwise.
Type	boolean
Read Only	False
Added	iLO 5 1.20

WaitTimeSeconds

Member of HpeComponentUpdateTask.v1_4_0.HpeComponentUpdateTask


Description	The number of seconds to pause if the command is 'Wait'. Ignored otherwise.
Type	integer
Read Only	False
Added	iLO 5 1.10

HpeComponentUpdateTaskQueueCollection

@odata.type: "#HpeComponentUpdateTaskQueueCollection.HpeComponentUpdateTaskQueueCollection"

A Collection of HpeComponentUpdateTaskQueue resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/updatetaskqueue`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeComponentUpdateTask

Members (array)

Member of HpeComponentUpdateTaskQueueCollection.HpeComponentUpdateTaskQueueCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeComponentUpdateTaskQueueCollection.HpeComponentUpdateTaskQueueCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeComponentUpdateTaskQueueCollection.HpeComponentUpdateTaskQueueCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeDirectoryTest

@odata.type: "#HpeDirectoryTest.v1_0_0.HpeDirectoryTest"

The HpeDirectoryTest resource describes the BMC directory test.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/directorytest`	GET POST

OverallStatus

Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest


Description	Represents the overall status of directory tests.
Type	string
Read Only	True
Added	iLO 5 1.40

The following are the supported values:

Value	Description
`NotRun`	The Overall Directory Test was not run.
`InProgress`	The Overall Directory Test is in progress.
`Success`	The Overall Directory Test has completed successfully.
`Warning`	The Overall Directory Test has completed with warning.
`Failed`	The Overall Directory Test has failed.
`Error`	The Directory Test has encountered an error condition.

TestResults (array)

Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest

TestResults is an array containing elements of:

TestResults[{item}].Notes Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest


Description	This provides additional details on the directory test.
Type	string or null
Read Only	True
Added	iLO 5 1.40

TestResults[{item}].Status Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest See the Redfish standard schema and specification for information on common Status object.

TestResults[{item}].TestName Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest


Description	The name of directory test.
Type	string
Read Only	True
Added	iLO 5 1.40

Actions

HpeDirectoryTest.StartTest Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest Start the directory test.

Parameters:

HpeESKM

@odata.type: "#HpeESKM.v2_0_0.HpeESKM"

The HpeESKM resource describes properties for managing the ESKM feature. ESKM (Enterprise Security Key Manager) enables connections to an operational key manager,change redundancy settings,view the key manager connection settings,test the connection,and view key management events.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/eskm`	GET POST PATCH

ESKMEvents (array)

Member of HpeESKM.v2_0_0.HpeESKM

ESKMEvents is an array containing elements of:

ESKMEvents[{item}].Event Member of HpeESKM.v2_0_0.HpeESKM


Description	ESKM event description.
Type	string or null
Read Only	True
Added	iLO 5 1.10

ESKMEvents[{item}].Timestamp Member of HpeESKM.v2_0_0.HpeESKM


Description	Time of ESKM event.
Type	string or null
Read Only	True
Added	iLO 5 1.10
Format	date-time

KeyManagerConfig

KeyManagerConfig.AccountGroup Member of HpeESKM.v2_0_0.HpeESKM


Description	Account group on ESKM.
Type	string or null
Read Only	False
Added	iLO 5 1.10

KeyManagerConfig.AccountName Member of HpeESKM.v2_0_0.HpeESKM


Description	Account name on ESKM.
Type	string
Read Only	True
Added	iLO 5 1.10

KeyManagerConfig.ESKMLocalCACertificateName Member of HpeESKM.v2_0_0.HpeESKM


Description	This is the name of Local CA (Certificate Authority) in ESKM that is used to sign the ESKM server certificate. iLO will retrieve this certificate from the ESKM server.
Type	string or null
Read Only	False
Added	iLO 5 1.10

KeyManagerConfig.ImportedCertificateIssuer Member of HpeESKM.v2_0_0.HpeESKM


Description	Imported certificate issuer.
Type	string
Read Only	True
Added	iLO 5 1.10

KeyManagerConfig.ImportedCertificateSubject Member of HpeESKM.v2_0_0.HpeESKM


Description	Imported certificate subject.
Type	string
Read Only	True
Added	iLO 5 1.10

KeyManagerConfig.LoginName Member of HpeESKM.v2_0_0.HpeESKM


Description	ESKM administrator account login name. This property always returns null on GET.
Type	string or null
Read Only	False
Added	iLO 5 1.10

KeyManagerConfig.Password Member of HpeESKM.v2_0_0.HpeESKM


Description	ESKM administrator account password. This property always returns null on GET.
Type	string or null
Read Only	False
Added	iLO 5 1.10

KeyServerRedundancyReq

Member of HpeESKM.v2_0_0.HpeESKM


Description	If true encryption keys will be maintained on both the configured key servers. When this option is disabled, iLO will not verify that encryption keys are copied to both of the configured key servers.
Type	boolean
Read Only	False
Added	iLO 5 1.10

PrimaryKeyServerAddress

Member of HpeESKM.v2_0_0.HpeESKM


Description	Primary key server IP address or FQDN. Set to null to clear the value.
Type	string or null
Read Only	False
Added	iLO 5 1.10

PrimaryKeyServerPort

Member of HpeESKM.v2_0_0.HpeESKM


Description	Primary key server port number. Set to null to clear the value.
Type	integer or null
Read Only	False
Added	iLO 5 1.10

SecondaryKeyServerAddress

Member of HpeESKM.v2_0_0.HpeESKM


Description	Secondary key server IP address or FQDN. Set to null to clear the value.
Type	string or null
Read Only	False
Added	iLO 5 1.10

SecondaryKeyServerPort

Member of HpeESKM.v2_0_0.HpeESKM


Description	Secondary key server port number. Set to null to clear the value.
Type	integer or null
Read Only	False
Added	iLO 5 1.10

Actions

HpeESKM.ClearESKMLog Member of HpeESKM.v2_0_0.HpeESKM Clears ESKM log.

There are no parameters for this action.

HpeESKM.TestESKMConnections Member of HpeESKM.v2_0_0.HpeESKM Test ESKM connections.

There are no parameters for this action.

HpeHttpsCert

@odata.type: "#HpeHttpsCert.v2_0_0.HpeHttpsCert"

The HpeHttpsCert resource describes an X509 certificate.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/httpscert`	GET POST DELETE

CertificateSigningRequest

Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	GenerateCSR action, wait few minutes (upto 10), perform GET operation, fills CSR. Contains a public and private key pair.
Type	string or null
Read Only	True
Added	iLO 5 1.10

X509CertificateInformation

X509CertificateInformation.Issuer Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The Certificate Authority that issued the certificate.
Type	string
Read Only	True
Added	iLO 5 1.10

X509CertificateInformation.SerialNumber Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The serial number that the Certificate Authority assigned to the certificate.
Type	string
Read Only	True
Added	iLO 5 1.10

X509CertificateInformation.Subject Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The entity to which the certificate was issued.
Type	string
Read Only	True
Added	iLO 5 1.10

X509CertificateInformation.ValidNotAfter Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The date on which the certificate validity period ends.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time

X509CertificateInformation.ValidNotBefore Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The date on which the certificate validity period begins.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time

Actions

HpeHttpsCert.GenerateCSR Member of HpeHttpsCert.v2_0_0.HpeHttpsCert

Parameters:

City (string)

The city or locality where the company or organization that owns this iLO subsystem is located.

CommonName (string)

The FQDN of this iLO subsystem.

Country (string)

The two-character country code where the company or organization that owns this Manager subsystem is located. Eg: US

IncludeIP (boolean)

Include the IP Addresses in the CSR.

OrgName (string)

The name of the company or organization that owns this iLO subsystem.

OrgUnit (string)

The unit within the company or organization that owns this iLO subsystem.

State (string)

The state where the company or organization that owns this iLO subsystem is located.

HpeHttpsCert.ImportCertificate Member of HpeHttpsCert.v2_0_0.HpeHttpsCert Imports a Trusted Certificate and iLO is reset.

Parameters:

Certificate (string)

Contains PEM formatted X509 certificate (Base64 encoded).

HpeiLOAccountCertificateMap

@odata.type: "#HpeiLOAccountCertificateMap.v1_0_1.HpeiLOAccountCertificateMap"

The HpeiLOAccountCertificateMap resource describes mapping X509 certificates to user accounts.

This resource type was added in iLO 5 1.20

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/usercertificatemapping/{item}`	GET POST DELETE

Fingerprint

Member of HpeiLOAccountCertificateMap.v1_0_1.HpeiLOAccountCertificateMap


Description	The fingerprint which uniquely identifies the mapped certificate.
Type	string
Read Only	False
Added	iLO 5 1.10

FingerprintDigestAlgorithm

Member of HpeiLOAccountCertificateMap.v1_0_1.HpeiLOAccountCertificateMap


Description	The algorithm used to calculate the fingerprint.
Type	string
Read Only	False
Added	iLO 5 1.10

UserName

Member of HpeiLOAccountCertificateMap.v1_0_1.HpeiLOAccountCertificateMap


Description	The name used to log in to the management processor.
Type	string
Read Only	False
Added	iLO 5 1.10

HpeiLOAccountCertificateMapCollection

@odata.type: "#HpeiLOAccountCertificateMapCollection.HpeiLOAccountCertificateMapCollection"

A Collection of HpeiLOAccountCertificateMap resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/usercertificatemapping`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOAccountCertificateMap

Members (array)

Member of HpeiLOAccountCertificateMapCollection.HpeiLOAccountCertificateMapCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOAccountCertificateMapCollection.HpeiLOAccountCertificateMapCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeiLOAccountCertificateMapCollection.HpeiLOAccountCertificateMapCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeiLOActiveHealthSystem

@odata.type: "#HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem"

The HpeiLOActiveHealthSystem resource describes the properties for managing the Active Health System.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/activehealthsystem`	GET POST PATCH

AHSEnabled

Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	Determines whether HPE Active Health System logging is enabled or disabled.
Type	boolean
Read Only	False
Added	iLO 5 1.10

AHSFileEnd

Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	The end of the AHS log.
Type	string or null
Read Only	True
Added	iLO 5 1.10
Format	date-time

AHSFileStart

Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	The start of the AHS log.
Type	string or null
Read Only	True
Added	iLO 5 1.10
Format	date-time

AHSStatus

AHSStatus.HardwareEnabled Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	Determines whether HPE Active Health System logging in hardware is enabled or not.
Type	boolean
Read Only	True
Added	iLO 5 1.20

AHSStatus.SoftwareEnabled Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	Determines whether HPE Active Health System logging in software is enabled or not.
Type	boolean
Read Only	True
Added	iLO 5 1.20

AHSStatus.TemporaryHoldEnabled Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	Determines whether HPE Active Health System logging access is temporarily disabled.
Type	boolean
Read Only	True
Added	iLO 5 1.20

LocationParameters

LocationParameters.case_no Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the case number into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&case_no=abc123.
Type	string
Read Only	True
Added	iLO 5 1.10

LocationParameters.co_name Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the company name into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&co_name=myCompany.
Type	string
Read Only	True
Added	iLO 5 1.10

LocationParameters.contact_name Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the contact name into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&contact_name=JohnDoe.
Type	string
Read Only	True
Added	iLO 5 1.10

LocationParameters.days Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter should be used to download the most recent N days of the AHS log. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?days=7. Will retrive logs made within the last 7 days.
Type	string
Read Only	True
Added	iLO 5 1.15

LocationParameters.downloadAll Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter should be used to download entire AHS log. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1.
Type	string
Read Only	True
Added	iLO 5 1.10

LocationParameters.email Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the contacts email address into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&email=abc@xyz.com.
Type	string
Read Only	True
Added	iLO 5 1.10

LocationParameters.from Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter must be added with the 'to' query parameter to the AHS location URI to limit the range of data returned. 'downloadAll' parameter should not be used with this query parameter. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?from=2014-03-01&&to=2014-03-30.
Type	string
Read Only	True
Added	iLO 5 1.10

LocationParameters.phone Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the contacts phone number into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&contact_name=JohnDoe&&phone=555-555-5555.
Type	string
Read Only	True
Added	iLO 5 1.10

LocationParameters.to Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter must be added with the 'from' query parameter to the AHS location URI to limit the range of data returned.'downloadAll' parameter should not be used with this query parameter. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?from=2014-03-01&&to=2014-03-30.
Type	string
Read Only	True
Added	iLO 5 1.10

Actions

HpeiLOActiveHealthSystem.CaptureSystemLog Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem There are no parameters for this action.

HpeiLOActiveHealthSystem.ClearLog Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem There are no parameters for this action.

HpeiLOActiveHealthSystem.LogAmplifierData Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem

Parameters:

iLOAmplifierManagesCount (integer)

Number of iLOs that this Amplifier instance manages.

iLOAmplifierName (string)

Name of the iLO Amplifier instance that manages this iLO.

HpeiLOActiveHealthSystem.LogMilestone Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem

Parameters:

MilestoneDescription (string)

Description of milestone.

MilestoneOrigin (string)

Origin of milestone.

HpeiLOBackupFile

@odata.type: "#HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile"

The HpeiLOBackupFile resource describes the properties for managing BMC backup files.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/backuprestoreservice/backupfiles/{item}`	GET POST DELETE

Created

Member of HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile


Description	ISO-time of backup file creation (by whomever created this thing)
Type	string
Read Only	True
Added	iLO 5 1.40
Format	date-time

FileSize

Member of HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile


Description	Size of backup file.
Type	integer or null
Read Only	True
Added	iLO 5 1.40

FirmwareVersion

Member of HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile


Description	iLO firmware version running when this backup file was created.
Type	string or null
Read Only	True
Added	iLO 5 1.40

Actions

HpeiLOBackupFile.Restore Member of HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile There are no parameters for this action.

HpeiLOBackupFileCollection

@odata.type: "#HpeiLOBackupFileCollection.HpeiLOBackupFileCollection"

A Collection of HpeiLOBackupFile resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/backuprestoreservice/backupfiles`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOBackupFile

Members (array)

Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection


Description	The total number of collection members.
Type	integer
Read Only	True

Oem.Hpe.BackupFileCount

Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection


Description	The number of backup files reported.
Type	integer or null
Read Only	True
Added	iLO 5 1.40

Oem.Hpe.BackupFilesAllowed

Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection


Description	The number of backup files supported.
Type	integer or null
Read Only	True
Added	iLO 5 1.40

HpeiLOBackupRestoreService

@odata.type: "#HpeiLOBackupRestoreService.v2_2_0.HpeiLOBackupRestoreService"

The HpeiLOBackupRestoreService resource describes the properties for using the BMC backup and restore features.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/backuprestoreservice`	GET PATCH

BackupFileLocation

Member of HpeiLOBackupRestoreService.v2_2_0.HpeiLOBackupRestoreService


Description	The URI to which a client may POST to create and download a file for a subsequent restore operation.
Type	string
Read Only	True
Added	iLO 5 1.15
Format	uri-reference

BackupFiles

Link to backup files. BackupFiles is a link ("@odata.id": URI) to another resource.

CustomBackupandRestore

Member of HpeiLOBackupRestoreService.v2_2_0.HpeiLOBackupRestoreService


Description	This property indicates whether a custom backup and restore is enabled.
Type	boolean
Read Only	False

HttpPushUri

Member of HpeiLOBackupRestoreService.v2_2_0.HpeiLOBackupRestoreService


Description	The URI to which a client may POST a file for a subsequent restore operation.
Type	string
Read Only	True
Added	iLO 5 1.15
Format	uri-reference

HpeiLODateTime

@odata.type: "#HpeiLODateTime.v2_0_0.HpeiLODateTime"

The HpeiLODateTime resource describes the properties for managing the BMC data and time.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/datetime`	GET PATCH

Links to other Resources

Link Name	Destination type
`Links/EthernetNICs`	Collection of EthernetInterface

ConfigurationSettings


Description	The state of the currently displayed configuration settings.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value
`Current`
`SomePendingReset`

DateTime


Description	The date and time used by management processor.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time

NTPServers (array)

NTPServers is an array containing elements of:


Description	The current NTP server's IPv4 address, IPv6 address, or FQDN. The value either comes from DHCP or is static depending on the DHCP settings.
Type	string or null
Read Only	True

PropagateTimeToHost


Description	Determines whether the server time is synchronized with the management processor time during the first POST after AC power is applied.
Type	boolean
Read Only	False
Added	iLO 5 1.10

StaticNTPServers (array)

StaticNTPServers is an array containing elements of:


Description	The static NTP server's IPv4 address, IPv6 address, or FQDN. To set this property, management processor must not be configured to use NTP servers provided by DHCPv4 or DHCPv6.
Type	string
Read Only	True

TimeZone

TimeZone.Index Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The index of the current time zone. To set a new time zone, specify a different time zone index. This property can be set only when DHCPv4 or DHCPv6 supplied time settings are disabled. Since the time zone list might vary from one firmware version to another (which often leads to differences in time zone indices), setting the time zone by name is recommended over setting by index, for better compatibility.
Type	number
Read Only	False
Added	iLO 5 1.10

TimeZone.UtcOffset Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The UTC offset of the current time zone, in the format {+/-}hh:mm
Type	string
Read Only	True
Added	iLO 5 1.10

TimeZone.Value Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The environment variable value.
Type	string
Read Only	True
Added	iLO 5 1.10

TimeZoneList (array)

TimeZoneList is an array containing elements of:

TimeZoneList[{item}].Index Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The time zone index.
Type	number
Read Only	True
Added	iLO 5 1.10

TimeZoneList[{item}].UtcOffset Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The UTC offset of the time zone, in the format {+/-}hh:mm
Type	string
Read Only	True
Added	iLO 5 1.10

TimeZoneList[{item}].Value Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The environment variable value.
Type	string
Read Only	True
Added	iLO 5 1.10

HpeiLOEmbeddedMedia

@odata.type: "#HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia"

The HpeiLOEmbeddedMedia resource describes the properties for the embedded media.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/embeddedmedia`	GET

Controller

Controller.Firmware Controller.Firmware.Current Controller.Firmware.Current.VersionString Member of HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia


Description	The current version of the embedded media controller.
Type	string
Read Only	True
Added	iLO 5 1.10

Controller.Status Member of HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia See the Redfish standard schema and specification for information on common Status object.

SDCard

SDCard.SizeMB Member of HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia


Description	The size of the SD card present in the server, in MB.
Type	integer
Read Only	True
Added	iLO 5 1.10

SDCard.Status Member of HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia See the Redfish standard schema and specification for information on common Status object.

HpeiLOFederatedGroupCapping

@odata.type: "#HpeiLOFederatedGroupCapping.v2_0_0.HpeiLOFederatedGroupCapping"

The HpeiLOFederatedGroupCapping resource describes the properties for managing Federated Group Capping.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/federatedgroupcapping`	GET PATCH

CapWatts

Member of HpeiLOFederatedGroupCapping.v2_0_0.HpeiLOFederatedGroupCapping


Description	The configured power cap for all servers in a group. This value is 0 if the power cap is not configured.
Type	integer
Read Only	True
Added	iLO 5 1.10

CapacityWatts

Member of HpeiLOFederatedGroupCapping.v2_0_0.HpeiLOFederatedGroupCapping


Description	The total power supply capacity for all servers in a group.
Type	integer
Read Only	True
Added	iLO 5 1.10

Groups

Throttle

Member of HpeiLOFederatedGroupCapping.v2_0_0.HpeiLOFederatedGroupCapping


Description	High, Med, or Low based on the percentage of power usage.
Type	string
Read Only	True
Added	iLO 5 1.10

HpeiLOFederationGroup

@odata.type: "#HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup"

The HpeiLOFederationGroup resource describes the properties for managing Federation groups.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/federationgroups/{item}`	GET PATCH DELETE

Key

Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	The password used by the Federation Group.
Type	string or null
Read Only	False

Privileges

Privileges.HostBIOSConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Host BIOS configuration privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Privileges.HostNICConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Host NIC configuration privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Privileges.HostStorageConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Host Storage configuration privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Privileges.LoginPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Login privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Privileges.RemoteConsolePriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Remote console privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Privileges.SystemRecoveryConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	System Recovery configuration privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Privileges.UserConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	User configuration privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Privileges.VirtualMediaPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Virtual media privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Privileges.VirtualPowerAndResetPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Virtual power and reset privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Privileges.iLOConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	The management processor configuration privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

HpeiLOFederationGroupCollection

@odata.type: "#HpeiLOFederationGroupCollection.HpeiLOFederationGroupCollection"

A Collection of HpeiLOFederationGroup resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/federationgroups`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOFederationGroup

Members (array)

Member of HpeiLOFederationGroupCollection.HpeiLOFederationGroupCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOFederationGroupCollection.HpeiLOFederationGroupCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeiLOFederationGroupCollection.HpeiLOFederationGroupCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeiLOFederationPeers

@odata.type: "#HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers"

The HpeiLOFederationPeers resource describes the properties for viewing Federation peers.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/federationpeers/{item}`	GET

Peers (array)

Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers

Peers is an array containing elements of:

Peers[{item}].HttpErrorCode Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	Error code for success or failure.
Type	integer
Read Only	True
Added	iLO 5 1.10

Peers[{item}].ManagerIPAddress Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	Manager IP address of the federation peer.
Type	string
Read Only	True
Added	iLO 5 1.10

Peers[{item}].Time Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	Time when the federation peer was added.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time

Peers[{item}].URL Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	URL of the federation peer.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	url

Peers[{item}].UUID Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	UUID peers that are part of the federation group.
Type	string
Read Only	True
Added	iLO 5 1.10

HpeiLOFederationPeersCollection

@odata.type: "#HpeiLOFederationPeersCollection.HpeiLOFederationPeersCollection"

A Collection of HpeiLOFederationPeers resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/federationpeers`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOFederationPeers

Members (array)

Member of HpeiLOFederationPeersCollection.HpeiLOFederationPeersCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOFederationPeersCollection.HpeiLOFederationPeersCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeiLOFederationPeersCollection.HpeiLOFederationPeersCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeiLOFrus

@odata.type: "#HpeiLOFrus.v2_0_0.HpeiLOFrus"

The HpeiLOFrus resource describes features of add-in adapters.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/basefrus/{item}`	GET
`/redfish/v1/chassis/{item}/basefrus/{item}/details`	GET
`/redfish/v1/chassis/{item}/mezzfrus/{item}`	GET
`/redfish/v1/chassis/{item}/mezzfrus/{item}/details`	GET

FRU


Description	The typename this FRU describes.
Type	string
Read Only	True
Added	iLO 5 1.10

FRULink


Description	The aggregation of the Link signals for all ports on the FRU card.
Type	boolean
Read Only	True
Added	iLO 5 1.10

FRUType


Description	The type of FRU that is installed, i.e. Base or Mezzanine FRU.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value
`Base`
`Mezzanine`

Interlocked


Description	Indicates if a PCIe card is installed in slot.
Type	boolean
Read Only	True
Added	iLO 5 1.10

Location


Description	The location where the FRU resides.
Type	string
Read Only	True
Added	iLO 5 1.10

PGood


Description	The Power Good status.
Type	boolean
Read Only	True
Added	iLO 5 1.10

PhysicalSlot


Description	The physical slot in which this FRU resides. 0 is for Base FRU, 1-N is for Mezzanine FRUs
Type	integer
Read Only	True
Added	iLO 5 1.10

Seated


Description	Indicates if the Base FRU is properly seated in the slot.
Type	boolean
Read Only	True
Added	iLO 5 1.10

SerialNumber


Description	The system's serial number.
Type	string
Read Only	True
Added	iLO 5 1.10

UEFIDeviceName


Description	The Device Name in UTF-8 format.
Type	string
Read Only	True
Added	iLO 5 1.10

UEFIDevicePaths (array)

UEFIDevicePaths is an array containing elements of:


Type	string
Read Only	True

HpeiLOFrusCollection

@odata.type: "#HpeiLOFrusCollection.HpeiLOFrusCollection"

A Collection of HpeiLOFrus resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/basefrus`	GET
`/redfish/v1/chassis/{item}/mezzfrus`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOFrus

Members (array)

Member of HpeiLOFrusCollection.HpeiLOFrusCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOFrusCollection.HpeiLOFrusCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeiLOFrusCollection.HpeiLOFrusCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeiLOLicense

@odata.type: "#HpeiLOLicense.v2_3_0.HpeiLOLicense"

The HpeiLOLicense resource describes the properties for managing BMC licenses.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/licenseservice/{item}`	GET DELETE

Confirmation

Confirmation.Code Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Confirmation service response code.
Type	string
Read Only	True
Added	iLO 5 1.10

Confirmation.Message Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	User-friendly confirmation information for the current managment processor license.
Type	string
Read Only	True
Added	iLO 5 1.10

Confirmation.Service Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Confirmation service URI.
Type	string
Read Only	True
Added	iLO 5 1.10

Confirmation.Status Member of HpeiLOLicense.v2_3_0.HpeiLOLicense See the Redfish standard schema and specification for information on common Status object.

ConfirmationRequest

ConfirmationRequest.EON ConfirmationRequest.EON.License Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	The current license of this management processor.
Type	string
Read Only	True
Added	iLO 5 1.10

ConfirmationRequest.EON.LicenseKey Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	The license key installed on this management processor.
Type	string
Read Only	True
Added	iLO 5 1.10

ConfirmationRequest.EON.Quantity Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	The number of entitlements licensed.
Type	integer
Read Only	True
Added	iLO 5 1.10

ConfirmationRequest.EON.State Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	The current licensing state and behavior of the management processor. This is affected by license installation, activation and confirmation.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`unlicensed`	standard baseline functionality
`evaluation`	evaluation / demonstration temporary licensed functionality
`nfr`	not for resale experimental functionality
`expired`	standard baseline functionality and evaluation licenses no longer accepted
`unconfirmed`	licensed functionality that has not been confirmed
`timeout`	licensed functionality is disabled until the license is confirmed
`confirmed`	licensed functionality has been confirmed for use
`static`	system has active built-in licensed functionality that does not require confirmation
`err`	error

ConfirmationRequest.Signer Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Source of confirmation request.
Type	string
Read Only	True
Added	iLO 5 1.10

ConfirmationRequest.System ConfirmationRequest.System.ChipId Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Management processor unique chip identifier.
Type	string
Read Only	True
Added	iLO 5 1.10

ConfirmationRequest.System.Product Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	System housing management processor.
Type	string
Read Only	True
Added	iLO 5 1.10

ConfirmationRequest.System.SerialNumber Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	System serial number.
Type	string
Read Only	True
Added	iLO 5 1.10

License


Description	The current license of this management processor.
Type	string
Read Only	True
Added	iLO 5 1.10

LicenseClass


Description	The class of current license on this management processor.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value
`FQL`
`BETA`
`EVALUATION`
`AKA`
`DL`
`FFQL`
`SL`
`SITE`
`EVAL`
`MLA`

LicenseErr


Description	Error information from the most recent attempt to alter the installed management processor license.
Type	string
Read Only	True
Added	iLO 5 1.10

LicenseExpire


Description	User-friendly expiration information of the installed management processor license. For example, for demo license, Evaluation period 2 months 5 days 6 hours remain.
Type	string
Read Only	True
Added	iLO 5 1.10

LicenseFeatures

LicenseFeatures.AutoCertEnroll Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Automatic Certificate Enrollment.
Type	boolean
Read Only	True

LicenseFeatures.DirectoryAuth Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Directory integrated authentication.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.DowngradePolicy Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Firmware downgrade policy setting.
Type	boolean
Read Only	True
Added	iLO 5 1.40

LicenseFeatures.EmailAlert Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Email based alerting.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.FWScan Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Runtime FW Integrity check.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.Federation Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Distributed peer to peer management.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.Jitter Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Jitter Control.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.KD Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Kernel Debugging (VSP raw mode).
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.KeyMgr Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Store and retrieve keys from an external key manager.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.MURC Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Shared Multi-User Remote Console.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.ODIM Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Open Distributed Infrastructure Management.
Type	boolean
Read Only	True

LicenseFeatures.PowerReg Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Power Regulator.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.RC Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Graphical Remote Console.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.Recovery Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	OS Recovery Event.
Type	boolean
Read Only	True
Added	iLO 5 1.17

LicenseFeatures.RemoteSyslog Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Remote Syslog.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.Scrncap Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Video Capture.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.SecureErase Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Secure Erase of embedded media.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.SmartCard Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	2-Factor Authentication (Smart Card).
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.SuiteB Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	SuiteB/CNSA mode support.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.TextCons Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Text Console.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.VM Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Remote Console based Virtual Media.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.VMScript Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Scripted Virtual Media.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseFeatures.VSPLogging Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Virtual Serial Port Logging and Playback.
Type	boolean
Read Only	True
Added	iLO 5 1.10

LicenseInstallDate


Description	User-friendly installation date information of the installed management processor license. For example, 19 May 2017
Type	string
Read Only	True
Added	iLO 5 1.20

LicenseKey


Description	User-visible license key installed on this management processor. License keys are 25 or 29 characters and contain letters, numbers and hypens. Use POST method to collection of membertype HpeiLOLicense to install / update the license.
Type	string
Read Only	True
Added	iLO 5 1.10

LicenseSeats


Description	The number of systems authorized to use this activation key.
Type	integer
Read Only	True

LicenseTier


Description	The licensed feature-set of the management processor.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value
`STD`
`BLSTD`
`ADV`
`BLADV`
`ESS`
`SCALEOUT`
`APSE`

LicenseType


Description	The type of current license activation on this management processor.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value
`Unlicensed`
`Evaluation`
`Perpetual`
`Subscription`
`Internal`
`Duration`
`Expired`

HpeiLOLicenseCollection

@odata.type: "#HpeiLOLicenseCollection.HpeiLOLicenseCollection"

A Collection of HpeiLOLicense resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/licenseservice`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOLicense

Members (array)

Member of HpeiLOLicenseCollection.HpeiLOLicenseCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOLicenseCollection.HpeiLOLicenseCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeiLOLicenseCollection.HpeiLOLicenseCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeiLOResourceDirectory

@odata.type: "#HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory"

The HpeiLOResourceDirectory resource describes the resource directory. The resource directory is a selected set of resources and resource types for faster access to resources.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/resourcedirectory`	GET

Instances (array)

Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory

Instances is an array containing elements of:

Instances[{item}].@odata.id Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory


Type	string
Read Only	True
Format	uri-reference

Instances[{item}].@odata.type Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory


Type	string
Read Only	True

Instances[{item}].ETag Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory


Description	This is the last known etag of the resource. The property is omitted if not known.
Type	string
Read Only	True
Added	iLO 5 1.10

Instances[{item}].HttpMethods (array) Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory

HttpMethods is an array containing elements of:


Type	string
Read Only	True

The following are the supported values:

Value
`GET`
`HEAD`
`POST`
`PUT`
`PATCH`
`DELETE`

Instances[{item}].MemberType Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory


Description	This property has the type of members for collection resources.
Type	string
Read Only	True
Added	iLO 5 1.10

HpeiLOSecurityDashboard

@odata.type: "#HpeiLOSecurityDashboard.v1_0_0.HpeiLOSecurityDashboard"

The HpeiLOSecurityDashboard resource describes the BMC security dashboard.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/securitydashboard`	GET

Links to other Resources

Link Name	Destination type
`SecurityParameters`	HpeiLOSecurityParam

OverallSecurityStatus

Member of HpeiLOSecurityDashboard.v1_0_0.HpeiLOSecurityDashboard


Type	string
Read Only	True
Added	iLO 5 1.40

The following are the supported values:

Value	Description
`Ok`	The Overall security state of the system is OK.
`Risk`	The Overall security state of the system is Risk.
`Ignored`	The user has ignored (or suppressed) the risk on all the security parameters (whose Status value is Risk).

SecurityParameters

This property references a resource of type Collection with a MemberType of HpeiLOSecurityParam. SecurityParameters is a link ("@odata.id": URI) to another resource.

ServerConfigurationLockStatus

Member of HpeiLOSecurityDashboard.v1_0_0.HpeiLOSecurityDashboard


Type	string
Read Only	True
Added	iLO 5 1.40

The following are the supported values:

Value	Description
`Enabled`	Server Configuration Lock is Enabled.
`Disabled`	Server Configuration Lock is Disabled.

HpeiLOSecurityParam

@odata.type: "#HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam"

The HpeiLOSecurityParam resource describes the properties for BMC security dashboard parameters.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/securitydashboard/securityparams/{item}`	GET PATCH

Ignore

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This indicates if the security status of the security parameter is set to ignored or not.
Type	boolean or null
Read Only	False
Added	iLO 5 1.40

IgnoredBy

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents the user who changed the value of Ignore.
Type	string
Read Only	True
Added	iLO 5 1.40

IgnoredTime

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents the time when the risk configuration was suppressed.
Type	string
Read Only	True
Added	iLO 5 1.40

RecommendedAction

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents the recommended action.
Type	string
Read Only	True
Added	iLO 5 1.40

SecurityStatus

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents if the status of the security parameter.
Type	string
Read Only	True
Added	iLO 5 1.40

The following are the supported values:

Value	Description
`Risk`	This indicates a security issue associated with the security parameter.
`Ok`	This indicates no security issue associated with the security parameter.

State

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents the state or value of the security parameter.
Type	string
Read Only	True
Added	iLO 5 1.40

The following are the supported values:

Value	Description
`On`	The state of the Security Parameter is On.
`Off`	The state of the Security Parameter is Off.
`Enabled`	The state of the Security Parameter is Enabled.
`Disabled`	The state of the Security Parameter is Disabled.
`Failed`	The status of the Security Parameter or the result of an operation represented by the Security Parameter is Failed.
`Ok`	The status of the Security Parameter or the result of an operation represented by the Security Parameter is Ok.
`Insufficient`	The value of the Security Parameter is Insufficient or less than the default value.
`Repaired`	The state of the Security Parameter is Repaired.
`True`	The state of the Security Parameter is True.
`False`	The state of the Security Parameter is False.

HpeiLOSecurityParamCollection

@odata.type: "#HpeiLOSecurityParamCollection.HpeiLOSecurityParamCollection"

A Collection of HpeiLOSecurityParam resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/securitydashboard/securityparams`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOSecurityParam

Members (array)

Member of HpeiLOSecurityParamCollection.HpeiLOSecurityParamCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOSecurityParamCollection.HpeiLOSecurityParamCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeiLOSecurityParamCollection.HpeiLOSecurityParamCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeiLOSnmpService

@odata.type: "#HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService"

The HpeiLOSnmpService resource describes the properties for managing the SNMP configuration of the BMC.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice`	GET POST PATCH

Links to other Resources

Link Name	Destination type
`SNMPAlertDestinations`	Collection of HpeSNMPAlertDestination
`SNMPUsers`	Collection of HpeSNMPUser

AlertDestinationAssociations (array)

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService

AlertDestinationAssociations is an array containing elements of:

AlertDestinationAssociations[{item}].SNMPAlertProtocol Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Indicate the SNMP protocol associated with the AlertDestination.
Type	string or null
Read Only	False
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`SNMPv1Trap`	Indicate SNMPv1 trap is enabled for the destination.
`SNMPv3Trap`	Indicate SNMPv3 trap is enabled for the destination. Needs to fill the SecurityName as well.
`SNMPv3Inform`	Indicate SNMPv3 Inform is enabled for the destination. Needs to fill the SecurityName as well.
`Null`	A value is temporarily unavailable

AlertDestinationAssociations[{item}].SecurityName Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Provides the SNMPv3 security name associated with the destination when SNMP alert protocol is SNMPv3 trap or inform.
Type	string or null
Read Only	False
Added	iLO 5 1.20

AlertDestinations (array)

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService

AlertDestinations is an array containing elements of:


Type	string or null
Read Only	True

AlertsEnabled

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	The alert conditions that the management processor detects independently of the host operating system can be sent to specified SNMP alert destinations. Indicates if the SNMPv1 Trap or SNMPv3 Trap is enabled.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Contact

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	The string of up to 49 characters that specifies the system administrator or server owner. The string can include a name, email address, or phone number.
Type	string or null
Read Only	False
Added	iLO 5 1.10

Location

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	The string of up to 49 characters that specifies the physical location of the server.
Type	string or null
Read Only	False
Added	iLO 5 1.10

Oem.Hpe.SNMPColdStartTrapBroadcast

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	If set to true, the Cold Start Trap will be enabled. The Cold Start Trap is broadcast to a subnet broadcast address if there are no trap destinations configured in the SNMP Alert Destination(s) boxes.
Type	boolean
Read Only	False
Added	iLO 5 1.10

PeriodicHSATrapConfig

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	If there are any component in health status array(HSA) Trap are in degraded or failed condition then HSA trap will be sent periodically till the component status becomes ok or fine condition. This setting is disabled by default.
Type	string
Read Only	False
Added	iLO 5 1.20

The following are the supported values:

Value
`Disabled`
`Daily`
`Weekly`
`Monthly`

ReadCommunities (array)

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService

ReadCommunities is an array containing elements of:


Type	string
Read Only	True

Role

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	The string of up to 64 characters that describes the server role or function.
Type	string or null
Read Only	False
Added	iLO 5 1.10

RoleDetail

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	The string of up to 512 characters that describes specific tasks that the server might perform.
Type	string or null
Read Only	False
Added	iLO 5 1.10

SNMPAlertDestinations

SNMP Alert Destination details. SNMPAlertDestinations is a link ("@odata.id": URI) to another resource.

SNMPUsers

SNMPv3 User details. SNMPUsers is a link ("@odata.id": URI) to another resource.

SNMPv1Enabled

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Indicates if the SNMPv1 Query or SNMPv1 Trap is enabled.
Type	boolean
Read Only	False

SNMPv1RequestsEnabled

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Indicates if the SNMPv1 Query is enabled.
Type	boolean
Read Only	False

SNMPv1TrapEnabled

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Indicates if the SNMPv1 Trap is enabled.
Type	boolean
Read Only	False

SNMPv1Traps

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	When enabled, SNMPv1 traps are sent to the remote management systems configured in the SNMP Alert Destination(s) boxes.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SNMPv3EngineID

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	The SNMPv3 Engine ID is the unique identifier of an SNMP engine that belongs to an SNMP agent entity. This value must be a hexadecimal string with an even number of 6 to 32 characters, excluding the first two characters, 0x (for example, 0x01020304abcdef).
Type	string or null
Read Only	False
Added	iLO 5 1.10

SNMPv3InformRetryAttempt

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Specifies the number of retries to be used in SNMPv3 inform.
Type	integer
Read Only	False
Added	iLO 5 1.20

SNMPv3InformRetryIntervalSeconds

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Specifies the interval in seconds between SNMPv3 inform retries.
Type	integer
Read Only	False
Added	iLO 5 1.20

SNMPv3RequestsEnabled

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Indicates if the SNMPv3 Query is enabled.
Type	boolean
Read Only	False

SNMPv3TrapEnabled

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Indicates if the SNMPv3 Trap is enabled.
Type	boolean
Read Only	False

Status

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService See the Redfish standard schema and specification for information on common Status object.

TrapCommunities (array)

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService

TrapCommunities is an array containing elements of:


Type	string
Read Only	True

TrapSourceHostname

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Determines the host name that is used in the SNMP-defined sysName variable when the management processor generates SNMP traps.
Type	string
Read Only	False
Added	iLO 5 1.10

The following are the supported values:

Value
`Manager`
`System`

Users (array)

Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService

Users is an array containing elements of:

Users[{item}].AuthPassphrase Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Sets the passphrase to use for sign operations. Enter a value of 8 to 49 characters.
Type	string or null
Read Only	False
Added	iLO 5 1.10

Users[{item}].AuthProtocol Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Sets the message digest algorithm to use for encoding the authorization passphrase. The message digest is calculated over an appropriate portion of an SNMP message, and is included as part of the message sent to the recipient. Select MD5 (Message Digest) or SHA (Secure Hash Algorithm).
Type	string or null
Read Only	False
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`MD5`	Indicate Message Digest Algorithm.
`SHA`	Indicate Secure Hash Algorithm.
`SHA256`	Indicate SHA256 Algorithm.
`Null`	A value is temporarily unavailable

Users[{item}].PrivacyPassphrase Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Sets the passphrase to use for encrypt operations. Enter a value of 8 to 49 characters.
Type	string or null
Read Only	False
Added	iLO 5 1.10

Users[{item}].PrivacyProtocol Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	Sets the encryption algorithm to use for encoding the privacy passphrase. A portion of an SNMP message is encrypted before transmission. Select AES (Advanced Encryption Standard).
Type	string or null
Read Only	False
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`AES`	Indicate Advanced Encryption Standard Algorithm.
`Null`	A value is temporarily unavailable.

Users[{item}].SecurityName Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	The user profile name. Enter an alphanumeric string of 1 to 32 characters.
Type	string or null
Read Only	False
Added	iLO 5 1.10

Users[{item}].UserEngineID Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService


Description	The UserEngineID is combined with the SecurityName to create a SNMPv3 user for each manager. It is only used for creating remote accounts used with INFORM messages. If this property is not set then INFORM message will be sent with default or iLO configured engine ID. This value must be a hexadecimal string with an even number of 10 to 64 characters, excluding the first two characters, 0x (for example, 0x01020304abcdef).
Type	string or null
Read Only	False
Added	iLO 5 1.20

Actions

HpeiLOSnmpService.SendSNMPTestAlert Member of HpeiLOSnmpService.v2_4_1.HpeiLOSnmpService There are no parameters for this action.

HpeiLOSSO

@odata.type: "#HpeiLOSSO.v2_0_0.HpeiLOSSO"

The HpeiLOSSO resource describes the configuration of the HPE BMC single-sign-on trusted server feature.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/sso`	GET POST PATCH

ManagerTrustedCertificates (array)

Member of HpeiLOSSO.v2_0_0.HpeiLOSSO

ManagerTrustedCertificates is an array containing elements of:

ManagerTrustedCertificates[{item}].@odata.id Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Type	string
Read Only	True
Format	uri-reference

ManagerTrustedCertificates[{item}].@odata.type Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Type	string
Read Only	True

ManagerTrustedCertificates[{item}].Certificate Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Contains PEM formatted X509 certificate (Base64 encoded).
Type	string or null
Read Only	True
Added	iLO 5 1.10

ManagerTrustedCertificates[{item}].CertificateDetails ManagerTrustedCertificates[{item}].CertificateDetails.Issuer Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The Certificate Authority that issued the certificate.
Type	string
Read Only	True
Added	iLO 5 1.10

ManagerTrustedCertificates[{item}].CertificateDetails.Subject Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The entity to which the certificate was issued.
Type	string
Read Only	True
Added	iLO 5 1.10

ManagerTrustedCertificates[{item}].CertificateDetails.ValidNotAfter Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The date on which the certificate validity period ends.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time

ManagerTrustedCertificates[{item}].CertificateDetails.ValidNotBefore Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The date on which the certificate validity period begins.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time

ManagerTrustedCertificates[{item}].RecordType Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Specifies the type of SSO record imported.
Type	string
Read Only	true
Added	iLO 5 1.15

The following are the supported values:

Value	Description
`Certificate`	It is a PEM formatted X509 certificate (Base64 encoded).
`DNSName`	It is a DNS name or an IP address of the HPE SSO-compliant application.

ManagerTrustedCertificates[{item}].SerialNumber Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Contains the Serial number for the SSO records.
Type	integer
Read Only	True
Added	iLO 5 1.10

ManagerTrustedCertificates[{item}].ServerName Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The Server name (or certificate subject).
Type	string or null
Read Only	True
Added	iLO 5 1.10

ManagerTrustedCertificates[{item}].Status Member of HpeiLOSSO.v2_0_0.HpeiLOSSO See the Redfish standard schema and specification for information on common Status object.

SSOsettings

SSOsettings.AdminPrivilege SSOsettings.AdminPrivilege.HostBIOSConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host BIOS Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.AdminPrivilege.HostNICConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host NIC Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.AdminPrivilege.HostStorageConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host Storage Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.AdminPrivilege.LoginPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Login Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.AdminPrivilege.RemoteConsolePriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Remote Console Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.AdminPrivilege.SystemRecoveryConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	System Recovery Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.AdminPrivilege.UserConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	User Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.AdminPrivilege.VirtualMediaPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Virtual Media Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.AdminPrivilege.VirtualPowerAndResetPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Power and Reset Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.AdminPrivilege.iLOConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	iLO Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege SSOsettings.OperatorPrivilege.HostBIOSConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host BIOS Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege.HostNICConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host NIC Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege.HostStorageConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host Storage Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege.LoginPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Login Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege.RemoteConsolePriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Remote Console Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege.SystemRecoveryConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	System Recovery Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege.UserConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	User Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege.VirtualMediaPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Virtual Media Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege.VirtualPowerAndResetPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Power and Reset Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.OperatorPrivilege.iLOConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	iLO Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.SSOTrustMode Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Represents the SSO Trust Mode.
Type	string
Read Only	False
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`TrustNone`	Rejects all SSO connection request.
`TrustAll`	Accepts any SSO connection initiated from any HPE SSO compliant application.
`TrustbyName`	Enables SSO connections from an HPE SSO compliant application by matching a directly imported IP address or DNS name.
`TrustbyCert`	Enables SSO connections from an HPE SSO compliant application by matching a certificate previously imported to iLO.

SSOsettings.UserPrivilege SSOsettings.UserPrivilege.HostBIOSConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host BIOS Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.UserPrivilege.HostNICConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host NIC Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.UserPrivilege.HostStorageConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host Storage Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.UserPrivilege.LoginPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Login Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.UserPrivilege.RemoteConsolePriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Remote Console Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.UserPrivilege.SystemRecoveryConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	System Recovery Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.UserPrivilege.UserConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	User Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.UserPrivilege.VirtualMediaPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Virtual Media Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.UserPrivilege.VirtualPowerAndResetPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Power and Reset Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

SSOsettings.UserPrivilege.iLOConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	iLO Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO 5 1.10

Actions

HpeiLOSSO.DeleteAllSSORecords Member of HpeiLOSSO.v2_0_0.HpeiLOSSO Delete all the SSO records.

There are no parameters for this action.

HpeiLOSSO.DeleteSSORecordbyNumber Member of HpeiLOSSO.v2_0_0.HpeiLOSSO Delete SSO record by record number.

Parameters:

RecordNumber (integer)

Index of the SSO record to be deleted.

HpeiLOSSO.ImportCertificate Member of HpeiLOSSO.v2_0_0.HpeiLOSSO Import the HPE SSO Certificate.

Parameters:

CertInput (string)

PEM formatted X509 certificate (Base64 encoded)/DNS name or IP address to import the certificate.

CertType (string)

Specifies the type of certificate imported.

Value	Description
DirectImportCert	iLO directly imports the Certificate.
ImportCertUri	iLO imports the certificate from the HPE SSO compliant application over the network.

HpeiLOSSO.ImportDNSName Member of HpeiLOSSO.v2_0_0.HpeiLOSSO Add DNS Name to the record list.

Parameters:

DNSName (string)

DNS Name of the HPE SSO Trusted Server.

HpeInvalidImage

@odata.type: "#HpeInvalidImage.v1_0_0.HpeInvalidImage"

The HpeInvalidImage resource describes the properties of an invalid firmware image detected and preserved from a computer system.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/invalidimagerepository/{item}`	GET POST PATCH DELETE

Created


Description	ISO 8601 time string indicating when this image was added to the NAND.
Type	string
Read Only	True
Added	iLO 5 1.30
Format	date-time

DeviceClass


Description	Device type GUID from iLO secure flash header
Type	string
Read Only	True
Added	iLO 5 1.30

Filename


Description	The unique filename of the image.
Type	string
Read Only	True
Added	iLO 5 1.30

Filepath


Description	Path of file on the USB LUN if the repo is mounted as USB.
Type	string
Read Only	True
Added	iLO 5 1.30

ImageUri


Description	URI of the image binary.
Type	string
Read Only	True
Added	iLO 5 1.30
Format	uri-reference

SizeBytes


Description	Size of the image file in bytes.
Type	integer or null
Read Only	True
Added	iLO 5 1.30

HpeInvalidImageCollection

@odata.type: "#HpeInvalidImageCollection.HpeInvalidImageCollection"

A Collection of HpeInvalidImage resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/invalidimagerepository`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeInvalidImage

Members (array)

Member of HpeInvalidImageCollection.HpeInvalidImageCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeInvalidImageCollection.HpeInvalidImageCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeInvalidImageCollection.HpeInvalidImageCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeiSCSISoftwareInitiator

@odata.type: "#HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator"

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/bios/iscsi`	GET
`/redfish/v1/systems/{item}/bios/iscsi/settings`	GET PATCH

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeiSCSISoftwareInitiator
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator See the Redfish standard schema and specification for information on common @Redfish properties.

iSCSIInitiatorName

Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The worldwide unique iSCSI Qualified Name (IQN) of this iSCSI Initiator. Only IQN format is accepted. EUI format is not supported (for example, 'iqn.1986-03.com.hp:init.sn-123456').
Type	string
Read Only	True

iSCSINicSources (array)

Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator

iSCSINicSources is an array containing elements of:


Description	The BIOS Attribute that describes a NIC instance that can be used as a target for iSCSI configuration.
Type	string
Read Only	True

iSCSISources (array)

Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator

iSCSISources is an array containing elements of:

iSCSISources[{item}].StructuredBootString Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Identifies this iSCSI option within the server.
Type	string or null
Read Only	True

iSCSISources[{item}].UEFIDevicePath Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Standardized text representation of the UEFI device path for this option, in UTF-8 format.
Type	string or null
Read Only	True

iSCSISources[{item}].iSCSIAttemptInstance Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Uniquely identifies this iSCSI attempt within iSCSISources array. If set to zero, all other properties in the boot option object are ignored (which will delete an existing boot attempt).
Type	integer
Read Only	True

iSCSISources[{item}].iSCSIAttemptName Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Human readable descriptive name for this iSCSI attempt configuration
Type	string or null
Read Only	True

iSCSISources[{item}].iSCSIAuthenticationMethod Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI connection authentication method.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`None`	No iSCSI connection security.
`CHAP`	iSCSI connection is secured using Challenge Handshake Authentication Protocol (CHAP).

iSCSISources[{item}].iSCSIChapSecret Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The password needed for CHAP authentication. This is applicable only when the Authentication Method is set to CHAP, and the CHAP Type is set to Mutual.
Type	string or null
Read Only	True

iSCSISources[{item}].iSCSIChapType Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The CHAP authentication type. This is applicable only when the Authentication Method is set to CHAP.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`OneWay`	The target will authenticate the initiator. .
`Mutual`	both the initiator and target will authenticate each other.

iSCSISources[{item}].iSCSIChapUsername Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The user name needed for CHAP authentication. This is applicable only when the Authentication Method is set to CHAP.
Type	string or null
Read Only	True

iSCSISources[{item}].iSCSIConnectRetry Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The number of times to retry the iSCSI connection. Zero means no retries.
Type	integer
Read Only	True

iSCSISources[{item}].iSCSIConnectTimeoutMS Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI connection timeout value in milliseconds.
Type	integer
Read Only	True

iSCSISources[{item}].iSCSIConnection Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Enables or Disables iSCSI mode for a selected iSCSI attempt.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`Disabled`	Connecting to this iSCSI attempt is disabled.
`Enabled`	Connecting to this iSCSI attempt is enabled.
`EnabledMpio`	Connecting to this iSCSI attempt is enabled with MPIO (Multi Path I/O).

iSCSISources[{item}].iSCSIInitiatorGateway Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The gateway address of the iSCSI Initiator, if not configured via DHCP. The address must be an IPv4 or IPv6 address, depending on the IP Address Type.
Type	string
Read Only	True

iSCSISources[{item}].iSCSIInitiatorInfoViaDHCP Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	If enabled, the iSCSI Initiator information is configured from DHCP. Otherwise, the iSCSI initiator information must be statically configured. When providing static values for the Initiator, ensure Target settings are also configured with static values.
Type	boolean
Read Only	True

iSCSISources[{item}].iSCSIInitiatorIpAddress Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The IP Address of the iSCSI Initiator, if not configured via DHCP. The Initiator IP Address is always auto-assigned if IP address type is IPv6. The address must be an IPv4 or IPv6 address, depending on the IP Address Type.
Type	string
Read Only	True

iSCSISources[{item}].iSCSIInitiatorNetmask Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The subnet mask of the iSCSI Initiator, if not configured via DHCP. The address must be an IPv4.
Type	string
Read Only	True

iSCSISources[{item}].iSCSIIpAddressType Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI IP Address type. If set to Auto, IPv4 will be attempted first, followed by IPv6.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`IPv4`	The iSCSI IP address is configured in IPv4 format.
`IPv6`	The iSCSI IP address is configured in IPv6 format.
`Auto`	The iSCSI IP address is configured in IPv4. If an issue occurs with IPv4, then the IPv6 configuration is used.

iSCSISources[{item}].iSCSILUN Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI target Logical Unit Number (LUN), if not obtained from DHCP. This value must follow the SAM-2 spec. E.g. 0001-1234-5678-9ABC. If the digit number is less then 5 characters, a dash character is not required. E.g. 0001. If the lun number is 12345, input 1234-5
Type	string
Read Only	True

iSCSISources[{item}].iSCSINicSource Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	A BIOS Attribute that describes this selected NIC instance. This must match one of the possible values listed in the iSCSINicSources array.
Type	string or null
Read Only	True

iSCSISources[{item}].iSCSIReverseChapSecret Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The password needed for reverse CHAP authentication (from the target to the initiator). This is applicable only when the Authentication Method is set to CHAP, and the CHAP Type is set to Mutual.
Type	string or null
Read Only	True

iSCSISources[{item}].iSCSIReverseChapUsername Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	User Name for reverse CHAP authentication (from the target to the initiator). This is applicable only when the Authentication Method is set to CHAP, and the CHAP Type is set to Mutual.
Type	string or null
Read Only	True

iSCSISources[{item}].iSCSITargetInfoViaDHCP Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	If enabled, the iSCSI target information are configured from DHCP. Otherwise, the iSCSI target information must be statically configured.
Type	boolean
Read Only	True

iSCSISources[{item}].iSCSITargetIpAddress Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The IP Address of the iSCSI Target, if not obtained from DHCP. The address must be an IPv4 or IPv6 address, depending on the IP Address Type.
Type	string
Read Only	True

iSCSISources[{item}].iSCSITargetName Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The worldwide unique iSCSI Qualified Name (IQN) of this iSCSI target. Only the IQN format is accepted. EUI format is not supported (for example, 'iqn.1991-05.com.microsoft:iscsitarget-iscsidisk-target').
Type	string or null
Read Only	True

iSCSISources[{item}].iSCSITargetTcpPort Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI Target TCP Port number, if not obtained from DHCP.
Type	integer
Read Only	True

HpeKmsConfig

@odata.type: "#HpeKmsConfig.v1_0_0.HpeKmsConfig"

The schema definition for Key Management Service configuration.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/Systems/{item}/Bios/Kmsconfig/Settings`	GET PATCH
`/redfish/v1/systems/{item}/bios/Kmsconfig`	GET

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeKmsConfig
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeKmsConfig.v1_0_0.HpeKmsConfig See the Redfish standard schema and specification for information on common @Redfish properties.

DeleteUnusedEncryptionKeys


Description	Removes unused encryption keys.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Disabled`	Do not removed unused encryption keys.
`Enabled`	Remove unused encryption keys.

EncryptableDevices (array)

EncryptableDevices is an array containing elements of:

EncryptableDevices[{item}].DeviceName Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Name of the encryptable device.
Type	string
Read Only	True

EncryptableDevices[{item}].EncryptionAction Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Devices can take two types of action for encrypting namely, enable and disable. If user would like to modify the Passphrase, then User can opt to change encryption
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Enable`	Enable Encryption for the device.
`Disable`	Disable Encryption for the device.
`Change`	Modify the Encryption Passphrase.
`Unlock`	Unlock the Encrypted device.
`Undefined`	Encryption action is Undefined.

EncryptableDevices[{item}].EncryptionPhrase Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Encryption Passphrase would show up if the device is encrypted and be modified as well.
Type	string or null
Read Only	False

EncryptableDevices[{item}].EncryptionStatus Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Encryption status of the device.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`EncryptionStatusUnknown`	Device is encrypted, but Passphrase is unknown.
`Encrypted`	Device is Encrypted.
`Decrypted`	Device is Unencrypted.

EncryptableDevices[{item}].PassphraseType Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Passphrase can be either entered manually or auto generated
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Auto`	Passphrase is generated from the system.
`Manual`	Passphrase is entered manually.

KeyManagementType


Description	Key Management Type.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Disabled`	Key Management is Disabled
`Local`	Key Management Type is Local
`Remote`	Key Management Type is Remote

OpalBlockSid


Description	TCG Block SID.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Disabled`	Disable TCG Block SID feature.
`Enabled`	Enable TCG Block SID feature.

HpeMaintenanceWindow

@odata.type: "#HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow"

The HpeMaintenanceWindow resource describes the properties for managing the time window for a software or firmware update task or install set.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/maintenancewindows/{item}`	GET POST PATCH DELETE

Created

Member of HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow


Description	ISO-time of maintenance window creation (by whomever created this thing)
Type	string
Read Only	True
Added	iLO 5 1.30
Format	date-time

Expire

Member of HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow


Description	ISO 8601 Redfish-style time string after which we will automatically change state to Expired - null for no expire time
Type	string
Read Only	False
Added	iLO 5 1.30
Format	date-time

Modified

Member of HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow


Description	ISO-time of last maintenance window item update by updater (not client)
Type	string
Read Only	True
Added	iLO 5 1.30
Format	date-time

StartAfter

Member of HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow


Description	ISO 8601 Redfish-style time string of earliest execution.
Type	string
Read Only	False
Added	iLO 5 1.30
Format	date-time

HpeMaintenanceWindowCollection

@odata.type: "#HpeMaintenanceWindowCollection.HpeMaintenanceWindowCollection"

A Collection of HpeMaintenanceWindow resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/maintenancewindows`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeMaintenanceWindow

Members (array)

Member of HpeMaintenanceWindowCollection.HpeMaintenanceWindowCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeMaintenanceWindowCollection.HpeMaintenanceWindowCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeMaintenanceWindowCollection.HpeMaintenanceWindowCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeNetworkPortEVB

@odata.type: "#HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB"

Note: Deprecated, willl be removed in a future release. The HpeNetworkPortEVB resource describes the Hewlett Packard Enterprise property extensions for Network Ports Edge Virtual Bridging

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/networkadapters/{item}/networkports/{item}/hpeevb`	GET
`/redfish/v1/systems/{item}/networkinterfaces/{item}/networkports/{item}/hpeevb`	GET

Receiving

Receiving.CdcpActive Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	True if a currently active IEEE 802.1Qbg CDCP TLV has been received from the link partner.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.ChannelActive Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	A currently unexpired HPE Channel Link Control or HPE Channel Description TLV has been received from the link partner.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.ChannelDescriptionLocalSequenceNumber Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The link partner's HPE Channel Description sequence number that was last successfully received and processed.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.ChannelDescriptionRemoteSequenceNumber Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The last HPE Channel Decsription sequence number sent on this link that was successfully received and processed by the link partner.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.ChannelDescriptionSubtype Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The header subtype field of the last received HPE Channel Description TLV.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.ChannelLinkControlLocalSequenceNumber Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The link partner's HPE Channel Link Control sequence number that was last successfully received and processed.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.ChannelLinkControlMCEnable Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The Feature Indicators field, Management Controller (MC) Channel (SCID 4094) enabled state in the HPE CLC TLV being received from the link partner on this port.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.ChannelLinkControlRemoteSequenceNumber Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The last HPE Channel Link control sequence number sent on this link that was successfully received and processed by the link partner.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.ChannelLinkControlSubtype Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The header subtype field of the last received HPE Channel Link Control TLV.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.Role Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The link partner's IEEE 802.1Qbg operating role.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`bridge`	Indicates the link partner is operating as a Bridge.
`station`	Indicates the link partner is operating as a Station.

Receiving.SChannelAssignments (array) Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB

SChannelAssignments is an array containing elements of:

SChannelAssignments[{item}].Scid Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	SCID value for this <SCID,SVID> S-Channel identifier pairreceived from the link partner on this port.
Type	integer or null
Read Only	True

SChannelAssignments[{item}].Svid Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	SVID assignment value for this <SCID,SVID> S-Channel identifier pair received from the link partner on this port. When 0 it indicates an assignment request is in progress.
Type	integer or null
Read Only	True

Receiving.SChannelMaxCount Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	Indicates the number of S-Channels the link partner can support on this physical link.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.SChannelsSupported Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	When true this link supports S-Channels.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.VirtualLinkStatusVector Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	A bit vector indicating S-Channel status received from the link partner, 1=up, 0=down. S-Channel status bits are ordered by SCID from lowest numbered (first) to highest (last).
Type	string or null
Read Only	True
Added	iLO 5 1.20

Transmitting

Transmitting.ChannelDescriptionData (array) Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB

ChannelDescriptionData is an array containing elements of:

ChannelDescriptionData[{item}].Descriptor0BandwidthCirMbps Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The bandwidth Commited Information Rate (CIR) for this S-Channel, in Mbps.
Type	integer or null
Read Only	True

ChannelDescriptionData[{item}].Descriptor0BandwidthPirMbps Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The bandwidth Peak Information Rate (PIR) for this S-Channel, in Mbps.
Type	integer or null
Read Only	True

ChannelDescriptionData[{item}].Descriptor0ChannelTerminationType Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	Indicates the termination provided for this S-Channel.
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`primary-physical`	This S-Channel is presented to the host OS as a primary PCI physical function.
`SR-IOV-virtual`	This S-Channel is presented to the host OS as a PCI SR-IOV virtual function.
`secondary-physical`	This S-Channel is presented to the host OS as a secondary PCI physical function, i.e. a PCI physical function behind a bridge on the device.
`vSwitch-port`	This S-Channel is mapped to a Virtual Switch port.
`NCSI-port`	This S-Channel is mapped to the NCSI internal port for management.

ChannelDescriptionData[{item}].Descriptor0EthernetSupport Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	When true, this S-Channel supports Ethernet.
Type	boolean or null
Read Only	True

ChannelDescriptionData[{item}].Descriptor0FCoESupport Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	When true, this S-Channel supports Fibre Channel over Ethernet (FCoE).
Type	boolean or null
Read Only	True

ChannelDescriptionData[{item}].Descriptor0PcpSupport Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	Indicates which IEEE 802.1Q Ethernet Priority Code Point (PCP) classes are supported on this S-Channel. When no PCPs are supported, the S-Channel makes no attempt to filter or control traffic class. A string of 1/0 characters indicating 1=enabled, 0=disabled. PCP classes are ordered from highest numbered 7 (first) to lowest 0 (last).
Type	string or null
Read Only	True

ChannelDescriptionData[{item}].Descriptor0RoCEESupport Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	When true, this S-Channel supports RDMA over Converged Enhanced Ethernet (RoCEE).
Type	boolean or null
Read Only	True

ChannelDescriptionData[{item}].Descriptor0Scid Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The S-Channel identifier for this Descriptor0 instance.
Type	integer or null
Read Only	True

ChannelDescriptionData[{item}].Descriptor0iSCSISupport Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	When true, this S-Channel supports Internet SCSI (iSCSI).
Type	boolean or null
Read Only	True

ChannelDescriptionData[{item}].Descriptor1ConnectionID Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	A unique S-Channel identifer in UUID format.
Type	string or null
Read Only	True

ChannelDescriptionData[{item}].Descriptor1Scid Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The S-Channel identifier for this Descriptor1 instance.
Type	integer or null
Read Only	True

Transmitting.ChannelDescriptionLocalSequenceNumber Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	This station's channel discovery local sequence number which will be transmitted to the link partner on this port.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Transmitting.ChannelDescriptionRemoteSequenceNumber Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The link partner's channel discovery local sequence number that was last successfully received and processed.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Transmitting.ChannelDescriptorCount Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The number of channel descriptor pairs being transmitted to the link partner on this port.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Transmitting.ChannelLinkControlLocalSequenceNumber Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	This station's channel link control local sequence number which will be transmitted to the link partner on this port.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Transmitting.ChannelLinkControlMCEnable Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The Feature Indicators field, Management Controller (MC) Channel (SCID 4094) enabled state in the HPE CLC TLV being transmitted to the link partner on this port.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Transmitting.ChannelLinkControlRemoteSequenceNumber Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The link partner's channel link control local sequence number that was last successfully received and processed.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Transmitting.Role Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	This port's IEEE 802.1Qbg role being advertised on the link.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`bridge`	Indicates this link is operating locally as a Bridge.
`station`	Indicates this link is operating locally as a Station.

Transmitting.SChannelAssignments (array) Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB

SChannelAssignments is an array containing elements of:

SChannelAssignments[{item}].Scid Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	SCID value for this <SCID,SVID> S-Channel identifier pair being transmitted to the link partner on this port.
Type	integer or null
Read Only	True

SChannelAssignments[{item}].Svid Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	SVID assignment value for this <SCID,SVID> S-Channel identifier pair being transmitted to the link partner on this port. When 0 it indicates an SVID assignment request to the link partner is in progress.
Type	integer or null
Read Only	True

Transmitting.SChannelMaxCount Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	The Channel Capacity value being advertised to the link partner. It indicates the number of S-Channels this station can support on this physical link.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Transmitting.SChannelsSupported Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	When true, indicates that this physical link has S-Channel capability.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Transmitting.VirtualLinkStatusVector Member of HpeNetworkPortEVB.v1_2_0.HpeNetworkPortEVB


Description	A bit vector indicating S-Channel status being transmitted on this link, 1=up, 0=down. S-Channel status bits are ordered by SCID from lowest numbered (first) to highest (last).
Type	string or null
Read Only	True
Added	iLO 5 1.20

HpeNetworkPortLLDP

@odata.type: "#HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP"

NOTE: Deprecated, will be removed in a future release, replaced by NetworkPort.Oem.Hpe.LldpData. The HpeNetworkPortLLDP resource describes the Hewlett Packard Enterprise property extensions for Network Ports Link Layer Discovery Protocol

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/networkadapters/{item}/networkports/{item}/hpelldp`	GET
`/redfish/v1/systems/{item}/networkinterfaces/{item}/networkports/{item}/hpelldp`	GET

Receiving

Receiving.ChassisID Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The LLDP chassis ID received from the link partner.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Receiving.ChassisIDSubtype Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The IEEE 802.1AB-2009 chassis ID subtype received from the link partner.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in IETF RFC 4133.
`IfAlias`	Interface alias, based on the IfAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in IETF RFC 4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the IfName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC 3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.

Receiving.Dcb Receiving.Dcb.ApplicationPriorityReceived Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True when an unexpired Data Center Bridging (DCB) Application Priority Table TLV has been received.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.ApplicationPriorityTable (array) Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP

ApplicationPriorityTable is an array containing elements of:

ApplicationPriorityTable[{item}].ApplicationPriority Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	Indicates which priority level is assigned for this application protocol.
Type	integer or null
Read Only	True

ApplicationPriorityTable[{item}].ApplicationProtocol Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	An integer value indicating application protocol identity, of the type described by DCBApplicationSelect.
Type	integer or null
Read Only	True

ApplicationPriorityTable[{item}].ApplicationSelect Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	Indentifies the type of the DCBApplicationProtocol property.
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`reserved`	Reserved select value.
`default-Ethertype`	Default priority. Use when priority not otherwise specified.
`TCP-SCTP`	DCBApplicationProtocol value is a well known port over TCP or SCTP.
`UDP-DCCP`	DCBApplicationProtocol value is a well known port over UDP or DCCP.
`TCP-SCTP-UDP-DCCP`	DCBApplicationProtocol is a well known port over TCP, SCTP, SCTP, or DCCP.

Receiving.Dcb.Ets Receiving.Dcb.Ets.BandwidthAssignmentTable (array) Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP

BandwidthAssignmentTable is an array containing elements of:


Description	One entry in the DCB ETS Traffic Class (TC) Bandwidth Assignment Table.
Type	integer or null
Read Only	True

Receiving.Dcb.Ets.CreditBasedShaper Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True if the link partner supports the Credit-based Shaper (CBS) transmmission selection algortithm.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.Ets.MaximumTrafficClassCount Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The maximum number of traffic classes supported by the link partner.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.Ets.PriorityAssignmentTable (array) Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP

PriorityAssignmentTable is an array containing elements of:


Description	One entry in the DCB ETS Priority Assignment Table indicating this priority's Traffic Class assignment.
Type	integer or null
Read Only	True

Receiving.Dcb.Ets.TlvReceived Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True when an unexpired DCB Enhanced Transmission Selection (ETS) TLV has been received.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.Ets.TrafficSelectionAlgorithmTable (array) Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP

TrafficSelectionAlgorithmTable is an array containing elements of:


Description	An assignment of a Traffic Selection Algorithm (TSA) to a traffic class.
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`strict`	Strict priority algorithm.
`CBS`	Credit-Based Shaper algorithm.
`ETS`	Enhanced Traffic Selection algorithm.
`vendor`	Vendor specific algorithm for use with DCB.

Receiving.Dcb.Ets.Willing Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True if the link partner is willing to accept ETS configurations.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.LocalEqualRemote Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True when the transmitted and received contents match for both DCB ETS and PFC TLVs.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.Pfc Receiving.Dcb.Pfc.EnabledTrafficClasses Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	A bit string indicating which priority levels have PFC enabled, 1=enabled. PFC levels are bit ordered from 7 (first) to 0 (last).
Type	string or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.Pfc.MacSecurityBypassCapability Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True when the link partner has the ability to bypass MAC security in order to improve PFC responsiveness.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.Pfc.MaximumTrafficClassCount Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	Indicates the maximum number of traffic classes that the link partner can simultaneously support.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.Pfc.TlvReceived Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True when an unexpired DCB Priority Flow Control (PFC) TLV has been received.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.Pfc.Willing Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True if the LLDP link partner is willing to accept PFC configurations.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.Dcb.Version Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The DCB version supported by the link partner.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`unknown`	Unknown
`CEE`	Converged Enhanced Ethernet
`IEEE`	IEEE 802.1Q

Receiving.ManagementAddress Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The management address received from the link partner.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Receiving.ManagementAddressOID Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	An object identifier for the hardware or protocol entity associated with the management address.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Receiving.ManagementAddressReceived Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True when a currently unexpired management address TLV has been received from the link partner.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.ManagementAddressType Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The type of management address received from the link partner.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`IPv4`	Type 1 (IP version 4).
`IPv6`	Type 2 (IP version 6).
`all802`	Type 6 (All 802 media plus Ethernet 'canonical format').

Receiving.ManagementCvlanID Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The management CVLAN ID received from the link partner.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Receiving.ManagementIFNumSubtype Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	Management interface number subtype.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`unknown`	Interface number is not known.
`ifIndex`	Interface number is based on the ifIndex MIB object.
`sysPortNum`	Interface number is based on the system port numbering convention.

Receiving.ManagementIFNumber Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	Management interface number received from the link partner represented as a colon delimited string of hexadecimal octets.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Receiving.ManagementVlanReceived Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True when a currently unexpired management address VID TLV has been received from the link partner.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.NearestBridgeTtlExpired Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	True when the LLDP PDU most recently received from the link partner has expired.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Receiving.PortDescription Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The remote link partner's port description.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Receiving.PortID Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	A colon delimited string of hexadecimal octets received from the link partner identifying its port.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Receiving.PortIDSubtype Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The port ID subtype enumeration from IEEE 802.1AB-2009 Table 8-3, which indicates the format for the PortID property.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in IETF RFC 4133.
`IfAlias`	Interface alias, based on the IfAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in IETF RFC 4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the IfName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC 3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.

Receiving.SystemDescription Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The system description received from the link partner.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Transmitting

Transmitting.ChassisID Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The Link Layer Data Protocol (LLDP) chassis ID being transmitted on this link.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Transmitting.ChassisIDSubtype Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The IEEE 802.1AB-2009 chassis ID subtype being transmitted on this link.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in IETF RFC 4133.
`IfAlias`	Interface alias, based on the IfAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in IETF RFC 4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the IfName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC 3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.

Transmitting.ManagementAddresses (array) Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP

ManagementAddresses is an array containing elements of:

ManagementAddresses[{item}].ManagementIPAddress Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	A management address.
Type	string or null
Read Only	True

ManagementAddresses[{item}].ManagementIPAddressType Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The IANA type of this management address.
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`IPv4`	Type 1 (IP version 4).
`IPv6`	Type 2 (IP version 6).
`all802`	Type 6 (All 802 media plus Ethernet 'canonical format').

Transmitting.ManagementCvlanID Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The management CVLAN ID being transmitted on this link.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

Transmitting.ManagementCvlanIDTransmitted Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	When true, indicates that a management CVLAN ID is being transmitted on this link.
Type	boolean or null
Read Only	True
Added	iLO 5 1.20

Transmitting.PortDescription Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	An alphanumeric string describing this link.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Transmitting.PortID Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	A colon delimited string of hexadecimal octets identifying this port.
Type	string or null
Read Only	True
Added	iLO 5 1.20

Transmitting.PortIDSubtype Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	The port ID subtype from IEEE 802.1AB-2009 Table 8-3.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in IETF RFC 4133.
`IfAlias`	Interface alias, based on the IfAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in IETF RFC 4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the IfName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC 3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.

Transmitting.SystemDescription Member of HpeNetworkPortLLDP.v1_2_0.HpeNetworkPortLLDP


Description	A textual description of this system.
Type	string or null
Read Only	True
Added	iLO 5 1.20

HpePowerMeter

@odata.type: "#HpePowerMeter.v2_0_1.HpePowerMeter"

The HpePowerMeter resource contains the computer system power history logged by the BMC.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/fastpowermeter`	GET
`/redfish/v1/chassis/{item}/power/powermeter`	GET

Average


Description	Average power across all samples, over the last 24 hours.
Type	integer
Read Only	True
Added	iLO 5 1.10

Maximum


Description	Maximum power across all samples, taken from the 24 hour history.
Type	integer
Read Only	True
Added	iLO 5 1.10

Minimum


Description	Minimum power across all samples, taken from the 24 hour history.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail (array)

PowerDetail is an array containing elements of:

PowerDetail[{item}].AmbTemp Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Ambient temperature, in degrees Celsius.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].Average Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Average power in Watts over the sample time.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].Cap Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The applicable power cap in Watts at the time of this power sample.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].CpuAvgFreq Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	CPU average frequency in MHz.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].CpuCapLim Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Measures the effect of the power cap on performance in percent.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].CpuMax Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The percentage of time the CPU spent in its maximum power mode.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].CpuPwrSavLim Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Measures the effect of CPU Power Regulator state switching on performance in percent.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].CpuUtil Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	CPU utilization in percent.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].CpuWatts Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The power consumed by the system CPUs in Watts.
Type	integer
Read Only	True
Added	iLO 5 1.30

PowerDetail[{item}].DimmWatts Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The power consumed by the system memory DIMMs in Watts.
Type	integer
Read Only	True
Added	iLO 5 1.30

PowerDetail[{item}].GpuWatts Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The power consumed by the GPU(s) in Watts. This will be 0 if no GPUs are installed or if the drivers are not loaded.
Type	integer
Read Only	True
Added	iLO 5 1.30

PowerDetail[{item}].Minimum Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Minimum power in Watts over the sample time.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].Peak Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Peak power in Watts over the sample time.
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].PrMode Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Power Regulator mode, which can be OS Control, Static High, Static Low or Dynamic.
Type	string or null
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`dyn`	Dynamic Mode - CPU power regulation is managed dynamically by the firmware.
`min`	Minimum Mode - CPU power regulation is configured to save as much power as possible at the possible expense of performance.
`max`	Maximum Mode - CPU power regulation is configured for maximum performance at the possible expense of power efficiency.
`osc`	OS Control Mode - CPU power regulation is managed by the Operating System.

PowerDetail[{item}].PunCap Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	If true, CPU performance is being penalized by the current power cap.
Type	boolean
Read Only	True
Added	iLO 5 1.10

PowerDetail[{item}].Time Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Time at which the power sample detail was captured.
Type	string
Read Only	True
Added	iLO 5 1.10
Format	date-time

PowerDetail[{item}].UnachCap Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	If true, the configured power cap could not be achieved due to system power requirements.
Type	boolean
Read Only	True
Added	iLO 5 1.10

Samples


Description	Number of samples in the array.
Type	integer
Read Only	True
Added	iLO 5 1.10

HpeRemoteSupport

@odata.type: "#HpeRemoteSupport.v2_6_0.HpeRemoteSupport"

The HpeRemoteSupport resource describes the properties for management of HPE Embedded Report Support.

This resource type was added in iLO 5 1.20

HpeRemoteSupport enables management of HPE Remote Support configuration on iLO 5.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/remotesupportservice`	GET POST PATCH

Links to other Resources

Link Name	Destination type
`ServiceEventLogs`	Collection of LogEntry

ConnectModel


Description	The Remote Support connect model type.
Type	string
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value
`DirectConnect`
`CentralConnect`

DataCollectionFrequencyInDays


Description	The frequency of data collection in days. This is applicable only when the server is registered using Direct Connect.
Type	integer
Read Only	True
Added	iLO 5 1.20

DestinationPort


Description	The port number of the Insight Remote Support server. This is applicable for Central Connect only.
Type	integer
Read Only	True
Added	iLO 5 1.20

DestinationURL


Description	The host name or IP address of the Remote Support server. This is applicable for Central Connect only.
Type	string
Read Only	True
Added	iLO 5 1.20

DirectConnectRegistrationIsCompleted


Description	Step 2 of Direct Connect Registration completion status.
Type	boolean
Read Only	True

ExternalAgentName


Description	This indicates the name of external Remote Support agent.
Type	string
Read Only	True

HpePassportPassword


Description	HPE Passport Account Password.
Type	string or null
Read Only	True
Added	iLO 5 1.20

HpePassportUserId


Description	HPE Passport Account Id.
Type	string
Read Only	True
Added	iLO 5 1.20

LastTransmissionDate


Description	The last transmission date.
Type	string
Read Only	True
Added	iLO 5 1.20
Format	date-time

LastTransmissionError


Description	The last transmission error.
Type	string
Read Only	True
Added	iLO 5 1.20

LastTransmissionType


Description	The last transmission type.
Type	string or null
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value
`ActiveHealthSystemData`
`L2DataCollection`
`Registration`
`Deregistration`
`ServiceEvent`
`NoTransmission`
`Null`

MaintenanceModeEnabled


Description	This indicates if the server is in Maintenance Mode or not.
Type	boolean
Read Only	True
Added	iLO 5 1.30

MaintenanceTimeLeftInMinutes


Description	This indicates the time remaining in minutes for the server to be in the maintenance mode.
Type	integer
Read Only	True

ProxySettings

ProxySettings.Password Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport


Description	Password for web proxy server authentication.
Type	string or null
Read Only	False
Added	iLO 5 1.20

ProxySettings.Port Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport


Description	Port number on which to communicate with the web proxy server.
Type	integer or null
Read Only	False
Added	iLO 5 1.20

ProxySettings.Url Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport


Description	Web proxy server host name or IP address.
Type	string
Read Only	False
Added	iLO 5 1.20
Format	url

ProxySettings.Username Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport


Description	Username for web proxy server authentication.
Type	string or null
Read Only	False
Added	iLO 5 1.20

RemoteSupportEnabled


Description	This indicates if the Remote Support Service is available or not.
Type	boolean
Read Only	True
Added	iLO 5 1.20

ServiceEventLogs

A reference to the collection of service event logs. ServiceEventLogs is a link ("@odata.id": URI) to another resource.

Actions

HpeRemoteSupport.RegisterDeviceToRemoteSupport Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport

Parameters:

WebProxyUrl (string)

Web proxy server host name or IP address when connecting using Direct Connect.

DestinationUrl (string)

The host name or IP address of the Remote Support server. This is applicable for Central Connect only.

HpeSecureEraseReport

@odata.type: "#HpeSecureEraseReport.v1_0_0.HpeSecureEraseReport"

The HpeSecureEraseReport resource describes the secure erase status and the other details of the devices during the secure system erase operation.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureerasereportservice/secureerasereportentries/{item}`	GET

DeviceIdentifier

Member of HpeSecureEraseReport.v1_0_0.HpeSecureEraseReport


Description	This represents the unique identifier for the device in the system like it's physical location or the exact device path etc.,
Type	string or null
Read Only	True

DeviceType

Member of HpeSecureEraseReport.v1_0_0.HpeSecureEraseReport


Description	This indicates the device type being securely erased.
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`SmartStorage`	This indicates the device type is Smart Storage
`SATADrives`	This indicates the device type is SATA drive
`NVMeDrives`	This indicates the device type is NVMe drive
`NVDIMM`	This indicates the device type is NVDIMM/Persistent Memory
`TPM`	This indicates the device type is TPM (Trusted Platform Module)
`UEFIStore`	This indicates the device type is UEFI Store
`NAND`	This indicates the device type is Embedded NAND Flash
`NVRAM`	This indicates the device type is NVRAM (Battery backed SRAM)

EraseEndTime

Member of HpeSecureEraseReport.v1_0_0.HpeSecureEraseReport


Description	The date and time of the end of secure erase operation, ISO8601 Redfish-style time
Type	string
Read Only	True
Format	date-time

EraseStartTime

Member of HpeSecureEraseReport.v1_0_0.HpeSecureEraseReport


Description	The date and time of the start of secure erase operation, ISO8601 Redfish-style time
Type	string
Read Only	True
Format	date-time

EraseStatus

Member of HpeSecureEraseReport.v1_0_0.HpeSecureEraseReport


Description	Indicates the secure erase status of the individual components
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`Idle`	Indicates Secure System Erase is not started
`Initiated`	Indicates Secure System Erase process is started
`InProgress`	Indicates Secure System Erase process is under progress
`CompletedWithSuccess`	Indicates Secure System Erase process has been completed with no errors
`CompletedWithErrors`	Indicates Secure System Erase process has been completed with some errors
`Failed`	Indicates Secure System Erase process has failed

EraseType

Member of HpeSecureEraseReport.v1_0_0.HpeSecureEraseReport


Description	This indicates the NIST SP800-88 Rev.1 (National Institute of Standards and Technology) approved techniques to sanitize a particular media or device.
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`Purge`	This indicates that Purge technique is used to sanitize the device.
`Clear`	This indicates that Clear technique is used to sanitize the device.

SerialNumber

Member of HpeSecureEraseReport.v1_0_0.HpeSecureEraseReport


Description	This represents the serial number of the device being erased.
Type	string or null
Read Only	True

HpeSecureEraseReportCollection

@odata.type: "#HpeSecureEraseReportCollection.HpeSecureEraseReportCollection"

A Collection of HpeSecureEraseReport resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureerasereportservice/secureerasereportentries`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSecureEraseReport

Members (array)

Member of HpeSecureEraseReportCollection.HpeSecureEraseReportCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSecureEraseReportCollection.HpeSecureEraseReportCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeSecureEraseReportCollection.HpeSecureEraseReportCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeSecureEraseReportService

@odata.type: "#HpeSecureEraseReportService.v1_0_0.HpeSecureEraseReportService"

The HpeSecureEraseReportService resource describes the properties of the Secure Erase Report feature.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureerasereportservice`	GET POST

Links to other Resources

Link Name	Destination type
`Links/SecureEraseReportEntries`	Collection of HpeSecureEraseReport

EraseInitiatedBy

Member of HpeSecureEraseReportService.v1_0_0.HpeSecureEraseReportService


Description	This indicates the user name who initiated the secure system erase process.
Type	string or null
Read Only	True

ServerSerialNumber

Member of HpeSecureEraseReportService.v1_0_0.HpeSecureEraseReportService


Description	This represents the server serial number.
Type	string or null
Read Only	True

Actions

HpeSecureEraseReportService.DeleteSecureEraseReport Member of HpeSecureEraseReportService.v1_0_0.HpeSecureEraseReportService There are no parameters for this action.

HpeSecurityService

@odata.type: "#HpeSecurityService.v2_4_0.HpeSecurityService"

The HpeSecurityService resource describes the properties for management of the security configuration of the BMC.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice`	GET PATCH

Links to other Resources

Link Name	Destination type
`Links/AutomaticCertificateEnrollment`	HpeAutomaticCertEnrollment
`Links/CertAuth`	HpeCertAuth
`Links/ESKM`	HpeESKM
`Links/HttpsCert`	HpeHttpsCert
`Links/SSO`	HpeiLOSSO
`Links/SecurityDashboard`	HpeiLOSecurityDashboard
`Links/SecurityParams`	Collection of HpeiLOSecurityParam

CurrentCipher

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Current cipher in use.
Type	string
Read Only	True
Added	iLO 5 1.15

DisableWeakCiphers

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Disable weak ciphers in Production mode
Type	boolean
Read Only	False

LoginSecurityBanner

LoginSecurityBanner.IsEnabled Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Login security banner is enabled or not.
Type	boolean
Read Only	False
Added	iLO 5 1.15

LoginSecurityBanner.SecurityMessage Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Text message to appear on the iLO login page and iLO SSH pre-authentication banner when login security banner is enabled.
Type	string
Read Only	False
Added	iLO 5 1.15

PlatformCert

PlatformCert.Certificates This is a reference to a collection of certificates used for PlatformCert by this manager. Certificates is a link ("@odata.id": URI) to another resource.

PlatformCertUpdate

PlatformCertUpdate.Certificates This is a reference to a collection of certificates used for PlatformCert Updates by this manager. Certificates is a link ("@odata.id": URI) to another resource.

SSHHostKey

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	SSH Host Key identifying the service.
Type	string
Read Only	True
Added	iLO 5 1.40

SecurityState

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	The operational security level of this Manager.
Type	string
Read Only	False
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Wipe`	Manager is currently wiping security related content and returning to a lower security mode. This state will transition automatically when finished.
`Production`	Manager is operating in a normal security mode. Default state for new systems.
`HighSecurity`	Manager is operating in high security mode, requiring extra authentication on host interface(s), and stronger encryption on network interfaces.
`FIPS`	Similar to High Security. This mode is intended to meet the FIPS 140-2 level 1 and Common Criteria security requirements. A reset to defaults is required to exit this mode.
`CNSA`	Same as FIPS. Additionally meets the criteria for NSA Commercial National Security Algorithm suite. Must be in FIPS mode to transition to CNSA.
`SuiteB`	Same as FIPS. Additionally meets the criteria for NSA SuiteB Top Secret installations. Must be in FIPS mode to transition to SuiteB.
`SynergySecurityMode`	Synergy Security Mode is the mode supported by the Synergy Composer.

SecurityState@Redfish.AllowableValues (array)

Member of HpeSecurityService.v2_4_0.HpeSecurityService

SecurityState@Redfish.AllowableValues is an array containing elements of:


Type	string
Read Only	True

The following are the supported values:

Value
`Wipe`
`Production`
`HighSecurity`
`FIPS`
`CNSA`
`SuiteB`

SystemIAK

SystemIAK.Certificates This is a reference to a collection of certificates used for System IAK by this manager. Certificates is a link ("@odata.id": URI) to another resource.

SystemIDevID

SystemIDevID.Certificates This is a reference to a collection of certificates used for System IDevId by this manager. Certificates is a link ("@odata.id": URI) to another resource.

TLSVersion

TLSVersion.TLS1_0 Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	This Indicate whether the TLS 1.0 is Enabled or disabled.
Type	string or null
Read Only	False

The following are the supported values:

Value	Description
`Enabled`	Enabled TLS 1.0.
`Disabled`	Disabled TLS 1.0.

TLSVersion.TLS1_1 Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	This Indicate whether the TLS 1.1 is Enabled or disabled.
Type	string or null
Read Only	False

The following are the supported values:

Value	Description
`Enabled`	Enabled TLS 1.1.
`Disabled`	Disabled TLS 1.1.

TLSVersion.TLS1_2 Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	This Indicate whether the TLS 1.2 is Enabled or disabled.
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`Enabled`	Enabled TLS 1.2.
`Disabled`	Disabled TLS 1.2.

TLSVersion.TLS1_3 Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	This Indicate whether the TLS 1.3 is Enabled or disabled.
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`Enabled`	Enabled TLS 1.3.
`Disabled`	Disabled TLS 1.3.

TrustedOSSecurity

TrustedOSSecurity.EnableBackgroundScan Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Enables or disables background scan of host OS software.
Type	boolean
Read Only	False

TrustedOSSecurity.LastScanResult Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Health of the host after the last scan done by Trusted OS Security scan engine.
Type	string or null
Read Only	True

The following are the supported values:

Value	Description
`OK`	The last Trusted OS Security scan completed without finding any issues.
`Critical`	The last Trusted OS Security scan completed finding issue(s). Refer to the SL log for details.
`Unknown`	The health is Unknown because either the scan data is unavailable or scan is not enabled or last scan failed to complete.

TrustedOSSecurity.LastScanTime Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	The time stamp of the last Trusted OS Security scan.
Type	string or null
Read Only	True
Format	date-time

TrustedOSSecurity.OnIntegrityFailure Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Sets the policy for how the Trusted OS Security check handles integrity failures.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`NoAction`	No action will be taken when a failure is detected.
`Alert`	Generate an alert when a failure is detected.
`PowerOff`	Gracefully power system off when a failure is detected.
`PowerOffForce`	Force system power off when a failure is detected.
`Reset`	Reset system power off when a failure is detected.
`ColdBoot`	ColdBoot system power off when a failure is detected.
`ForceNMI`	ForceNMI system power off when a failure is detected.

TrustedOSSecurity.ScanEverySeconds Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Sets the interval between Trusted OS Security scans in second increments.
Type	integer or null
Read Only	False

iLOIDevID

iLOIDevID.Certificates This is a reference to a collection of certificates used for iLO IDevId by this manager. Certificates is a link ("@odata.id": URI) to another resource.

iLOLDevID

iLOLDevID.Certificates This is a reference to a collection of certificates used for iLO LDevId by this manager. Certificates is a link ("@odata.id": URI) to another resource.

HpeServerAccHddService

@odata.type: "#HpeServerAccHddService.v1_0_0.HpeServerAccHddService"

The HpeServerAccHddService resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/acchddservice`	GET

BackplaneInfo

BackplaneInfo.EndBay Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents a ending number of the bay.
Type	integer
Read Only	True
Added	iLO 5 1.20

BackplaneInfo.FirmwareRevision Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Indicates the firmware revision in ASCII value.
Type	string
Read Only	True
Added	iLO 5 1.20

BackplaneInfo.HostPortsInfo (array) Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService

HostPortsInfo is an array containing elements of:

HostPortsInfo[{item}].NodeNumber Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents the node number of compute node attached to host port x in SEP.
Type	integer
Read Only	True

HostPortsInfo[{item}].PortNumber Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents the number of physical host ports in SEP.
Type	integer
Read Only	True

HostPortsInfo[{item}].SlotNumber Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents the slot number of SAS attached to host port x in SEP.
Type	integer
Read Only	True

BackplaneInfo.SEPID Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Indicates the storage enclosure processor ID.
Type	integer
Read Only	True
Added	iLO 5 1.20

BackplaneInfo.SEPNodeId Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	The node ID represent the node ID where the storage enclosure processor is residing.
Type	integer
Read Only	True
Added	iLO 5 1.20

BackplaneInfo.StartBay Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents a starting number of the bay.
Type	integer
Read Only	True
Added	iLO 5 1.20

BackplaneInfo.TotalBays Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Total bay count represents the number of bays attached to the SEP.
Type	integer
Read Only	True
Added	iLO 5 1.20

BackplaneInfo.TypeID Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Indicates the Backplane type ID for the identifier for backplane type.
Type	integer
Read Only	True
Added	iLO 5 1.20

BackplaneInfo.WWID Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents a unique world wide ID defining a SEP.
Type	string
Read Only	True
Added	iLO 5 1.20

HpeServerAccHddZone

@odata.type: "#HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone"

The HpeServerAccHddZone resource describes the properties for management of shared hard drives in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/acchddservice/zone`	GET POST

BackupZoneConfigurationInBmc

BackupZoneConfigurationInBmc.HostPort (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

HostPort is an array containing elements of:

HostPort[{item}].BayNumber (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

BayNumber is an array containing elements of:


Type	integer
Read Only	True

HostPort[{item}].PortNumber Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	Represents the number of physical host ports in SEP, null represents unassigned bay group.
Type	integer or null
Read Only	True

CurrentZoneConfiguration

CurrentZoneConfiguration.HostPort (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

HostPort is an array containing elements of:

HostPort[{item}].BayNumber (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

BayNumber is an array containing elements of:


Type	integer
Read Only	True

HostPort[{item}].PortNumber Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	Represents the number of physical host ports in SEP, null represents unassigned bay group.
Type	integer or null
Read Only	True

PendingZoneConfiguration

PendingZoneConfiguration.HostPort (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

HostPort is an array containing elements of:

HostPort[{item}].BayNumber (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

BayNumber is an array containing elements of:


Type	integer
Read Only	True

HostPort[{item}].PortNumber Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	Represents the number of physical host ports in SEP, null represents unassigned bay group.
Type	integer or null
Read Only	True

SEPNodeId

Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	The node ID represent the node ID where the storage enclosure processor is residing.
Type	integer
Read Only	True
Added	iLO 5 1.20

TypeID

Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	Indicates the Backplane type ID for the identifier for backplane type.
Type	integer
Read Only	True
Added	iLO 5 1.20

Actions

HpeServerAccHddZone.BackupConfigurationToBmc Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone Backup Apollo Chassis Controller Hdd zone configuration to BMC.

There are no parameters for this action.

HpeServerAccHddZone.ConfigureZone Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone Execute Apollo Chassis Controller Hdd zone configuration.

Parameters:

HostPort (array)

HpeServerAccHddZone.LoadDefault Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone Load Apollo Chassis Controller default Hdd zone configuration.

There are no parameters for this action.

HpeServerAccPowerCalibration

@odata.type: "#HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration"

The HpeServerAccPowerCalibration resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice/calibration`	GET POST

CalibrationData

CalibrationData.EndTime Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The calibration end time stamp.
Type	string
Read Only	True
Added	iLO 5 1.20

CalibrationData.StartTime Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The calibration start time stamp.
Type	string
Read Only	True
Added	iLO 5 1.20

CalibrationData.State Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	Specifies whether the calibration is valid or not.
Type	boolean
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower CalibrationData.ThrottlePeakPower.Percent_000 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 0 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_005 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 5 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_010 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 10 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_015 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 15 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_020 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 20 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_025 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 25 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_030 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 30 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_035 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 35 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_040 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 40 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_045 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 45 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_050 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 50 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_055 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 55 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_060 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 60 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_065 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 65 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_070 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 70 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_075 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 75 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_080 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 80 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_085 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 85 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_090 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 90 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_095 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 95 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ThrottlePeakPower.Percent_100 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 100 Percent throttling.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationData.ZoneNumber Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The zone number either on the entire chassis or specific zone. 0 for entire chassis, other number is for specific zone.
Type	integer
Read Only	True
Added	iLO 5 1.20

CalibrationInProgress

Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The current state of the chassis power zone calibration task.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Actions

HpeServerAccPowerCalibration.Calibrate Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration Execute the Apollo Chassis Controller power calibration configuration.

Parameters:

ActionType (string)

Value	Description
Start
Stop

AllZone (boolean)

EEPROMSaveEnabled (boolean)

Seconds (integer)

ZoneNumber (integer)

HpeServerAccPowerLimit

@odata.type: "#HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit"

The HpeServerAccPowerLimit resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice/powerlimit`	GET POST

ActualPowerLimits (array)

Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit

ActualPowerLimits is an array containing elements of:

ActualPowerLimits[{item}].PowerLimitInWatts Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The actual power limit (in watts) for the zone, it will be set to null when power limit disabled.
Type	integer or null
Read Only	False
Added	iLO 5 1.20

ActualPowerLimits[{item}].ZoneNumber Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The zone number either on the entire chassis or specific zone. 0 for entire chassis, other number is for specific zone.
Type	integer
Read Only	True
Added	iLO 5 1.20

PowerLimitRanges (array)

Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit

PowerLimitRanges is an array containing elements of:

PowerLimitRanges[{item}].MaximumPowerLimit Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The Maximum power limit (in watts) for the zone.
Type	integer
Read Only	True
Added	iLO 5 1.20

PowerLimitRanges[{item}].MinimumPowerLimit Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The Minimum power limit (in watts) for the zone.
Type	integer
Read Only	True
Added	iLO 5 1.20

PowerLimitRanges[{item}].ZoneNumber Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The zone number either on the entire chassis or specific zone. 0 for entire chassis, other number is for specific zone.
Type	integer
Read Only	True
Added	iLO 5 1.20

PowerLimits (array)

Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit

PowerLimits is an array containing elements of:

PowerLimits[{item}].PowerLimitInWatts Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The target power limit (in watts) for the zone, it will be set to null when power limit disabled.
Type	integer or null
Read Only	False
Added	iLO 5 1.20

PowerLimits[{item}].ZoneNumber Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The zone number either on the entire chassis or specific zone. 0 for entire chassis, other number is for specific zone.
Type	integer
Read Only	True
Added	iLO 5 1.20

Actions

HpeServerAccPowerLimit.ConfigurePowerLimit Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit Deploy the Apollo Chassis Controller power limit configuration.

Parameters:

PowerLimits (array)

HpeServerAccPowerNodesInfo

@odata.type: "#HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo"

The HpeServerAccPowerNodesInfo resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice/nodesinfo`	GET

MaxSupportedNodes

Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo


Description	Total Nodes supported in Chassis.
Type	integer
Read Only	True
Added	iLO 5 1.20

NodeInfoList (array)

Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo

NodeInfoList is an array containing elements of:

NodeInfoList[{item}].NodeNumber Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo


Description	The physical node number in chassis.
Type	integer
Read Only	True
Added	iLO 5 1.20

NodeInfoList[{item}].Throttle Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo


Description	It indicates the current throttle on the node. (PWM %)
Type	integer
Read Only	True
Added	iLO 5 1.20

NodeInfoList[{item}].WarningStatus Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo


Description	Specifies whether the node is in warning status or not. WarningStatus indicates a node is over loading and chassis manager force it throttle at 50% for 5 mins
Type	boolean
Read Only	True
Added	iLO 5 1.20

HpeServerAccPowerService

@odata.type: "#HpeServerAccPowerService.v1_0_0.HpeServerAccPowerService"

The HpeServerAccPowerService resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice`	GET PATCH

EEPROMSaveEnabled

Member of HpeServerAccPowerService.v1_0_0.HpeServerAccPowerService


Description	Determines whether the EEPROM save is enabled or disabled.
Type	boolean
Read Only	False
Added	iLO 5 1.20

PowerRegulationEnabled

Member of HpeServerAccPowerService.v1_0_0.HpeServerAccPowerService


Description	Determines whether power regulation is enabled or disabled.
Type	boolean
Read Only	False
Added	iLO 5 1.20

PowerRegulatorMode

Member of HpeServerAccPowerService.v1_0_0.HpeServerAccPowerService


Type	string
Read Only	False
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`ACRedundancy`	AC Redundancy with Throttling Mode (Max Performance w/ Redundancy).
`UserConfig`	User Configurable Mode.
`APM`	APM Power Regulator Mode. Cannot configure by iLO.
`PowerFeedProtect`	Power Feed Protection Mode.

HpeServerAccPowerZone

@odata.type: "#HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone"

The HpeServerAccPowerZone resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice/zone`	GET POST

ZoneConfiguration

ZoneConfiguration.Zone (array) Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone

Zone is an array containing elements of:

Zone[{item}].Node (array) Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone

Node is an array containing elements of:

Node[{item}].NodeNumber Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone


Description	The node number of zone configuration.
Type	integer
Read Only	True

Node[{item}].NodePriority Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone


Description	The power regulation node priority, the range must between 1 - 5. 5 is default and lowest priority.
Type	integer
Read Only	True

Zone[{item}].ZoneNumber Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone


Description	The zone number of zone configuration.
Type	integer
Read Only	True

Zone[{item}].ZonePriority Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone


Description	The power regulation zone priority, the range must between 1 - 5. 5 is default and lowest priority.
Type	integer
Read Only	True

Actions

HpeServerAccPowerZone.ConfigureZone Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone Execute the Apollo Chassis Controller power regulation zone configuration.

Parameters:

Zone (array)

HpeServerBootSettings

@odata.type: "#HpeServerBootSettings.v2_0_0.HpeServerBootSettings"

The schema definition of the server UEFI Boot Order resource.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/bios/boot`	GET
`/redfish/v1/systems/{item}/bios/boot/settings`	GET PATCH

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeServerBootSettings
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings See the Redfish standard schema and specification for information on common @Redfish properties.

BootSources (array)

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings

BootSources is an array containing elements of:

BootSources[{item}].BootString Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	User-readable string that describes the UEFI boot option.
Type	string
Read Only	True

BootSources[{item}].CorrelatableID Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	Contains any CorrelatableIDs that represent this boot option. The correlatableID values can be JSON Pointers or UEFI identifiers.
Type	string
Read Only	True

BootSources[{item}].StructuredBootString Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	Uniquely identifies this boot option within the server.
Type	string
Read Only	True

BootSources[{item}].UEFIDevicePath Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	Standardized text representation of the UEFI device path for this boot option, in UTF-8 format.
Type	string
Read Only	True

DefaultBootOrder (array)

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings

DefaultBootOrder is an array containing elements of:


Description	Default UEFI boot order device type. This is used to define the order in which UEFI boot order is reset to when a default configuration is requested.
Type	string
Read Only	True

The following are the supported values:

Value
`UefiShell`
`Floppy`
`Cd`
`Usb`
`EmbeddedStorage`
`PcieSlotStorage`
`EmbeddedFlexLOM`
`PcieSlotNic`

DesiredBootDevices (array)

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings

DesiredBootDevices is an array containing elements of:

DesiredBootDevices[{item}].CorrelatableID Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	Standardized text representation of the UEFI device path of the desired boot device, in UTF-8 format. For example 'PciRoot(0x0)/Pci(0x2,0x2)/Pci(0x0,0x0)'
Type	string
Read Only	False

DesiredBootDevices[{item}].Lun Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	The Logical Unit Number (LUN) of the desired boot device. This value must be a hexadecimal string with an even number of 2 to 16 characters, excluding the first two characters, 0x (for example, '0x01').
Type	string
Read Only	False

DesiredBootDevices[{item}].Wwn Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	The Fibre Channel World Wide Name (WWN) of the desired boot device. This value must be a hexadecimal string with an even number of 2 to 16 characters, excluding the first two characters, 0x (for example, '0x0001020304050607').
Type	string
Read Only	False

DesiredBootDevices[{item}].iScsiTargetName Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	The iSCSI node target name of the desired boot device. The value must be a string based on IETF RFC 3270, and can be up to 223 characters in length (for example, 'iqn.1991-05.com.microsoft:iscsitarget-iscsidisk-target').
Type	string
Read Only	False

PersistentBootConfigOrder (array)

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings

PersistentBootConfigOrder is an array containing elements of:


Description	The structured boot string that references a corresponding entry in the BootSources array.
Type	string
Read Only	True

HpeServerConfigLock

@odata.type: "#HpeServerConfigLock.v1_0_0.HpeServerConfigLock"

The schema definition for Server Configuration Lock configuration.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/Systems/{item}/Bios/Serverconfiglock/Settings`	GET PATCH
`/redfish/v1/systems/{item}/bios/Serverconfiglock`	GET

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeServerConfigLock
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock See the Redfish standard schema and specification for information on common @Redfish properties.

NewServerConfigLockPassword

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	The new Server Configuration Lock password. This field is used to update the current Server Configuration Lock password and force the system configuration digital fingerprint to be recalculated.
Type	string or null
Read Only	True

ServerConfigLockChallenge

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to enable or disable a Server Configuration Lock password challenge on every boot.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Disabled`	Disable Server Configuration Lock password challenge on every boot.
`Enabled`	Enable Server Configuration Lock password challenge on every boot.
`Null`	A value is temporarily unavailable

ServerConfigLockDisable

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to disable Server Configuration Lock.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`False`	Don't disable Server Configuration Lock.
`True`	Disable Server Configuration Lock.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludeCpus

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude CPU information from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`False`	Do not exclude CPU information from the Digital Fingerprint.
`True`	Exclude CPU information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludeDimms

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude DIMM information from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`False`	Do not exclude DIMM information from the Digital Fingerprint.
`True`	Exclude DIMM information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludeFwRevs

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude system firmware revisions from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`False`	Do not exclude system firmware revision information from the Digital Fingerprint.
`True`	Exclude system firmware revision information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludePciSlots

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude PCIe slot information from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`False`	Do not exclude PCIe slot information from the Digital Fingerprint.
`True`	Exclude PCIe slot information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludeSecurity

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude security configuration information from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`False`	Do not exclude security configuration information from the Digital Fingerprint.
`True`	Exclude security configuration information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockLogStored

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Has a Server Configuration Lock failure log been stored?
Type	string
Read Only	True

The following are the supported values:

Value	Description
`True`	A Server Configuration Lock failure has been logged.
`False`	A Server Configuration Lock failure has not been logged.

ServerConfigLockPassword

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	The Server Configuration Lock password. If Server Configuration Lock is currently enabled, this field is used to convey the current Server Configuration Lock password and is required to make any Server Configuration Lock configuration changes. If Server Configuration Lock is currently disabled, this field is used to set the Server Configuration Lock password, and to digitally fingerprint the system to enable Server Configuration Lock.
Type	string or null
Read Only	True

ServerConfigLockState

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Enabled/Disabled state of the Server Configuration Lock Feature.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`Disabled`	The Server Configuration Lock feature is disabled.
`Enabled`	The Server Configuration Lock feature is enabled.

ServerConfigLockTamperHalt

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to enable or disable the Server Configuration Lock behavior to halt on a configuration change detection.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Disabled`	Disable Server Configuration Lock behavior to halt on configuration changes.
`Enabled`	Enable Server Configuration Lock behavior to halt on configuration changes.
`Null`	A value is temporarily unavailable

ServerConfigLockTransport

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to enable or disable Server Configuration Lock "first-boot" behaviors. This option is expected to be enabled just prior to shipping the server. When the server arrives at its destination and is first powered on, Server Configuration Lock will require the Server Configuration Lock password in order to boot. Server Configuration Lock will also indicate if someone attempted to change the system configuration during the shipment process.
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Disabled`	Disable Server Configuration Lock "first-boot" behaviors.
`Enabled`	Enable Server Configuration Lock "first-boot" behaviors.
`Null`	A value is temporarily unavailable

ServerConfigLockTransportAudit

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to enable or disable out-of-band acknowledge of Server Configuration Lock "first-boot" behaviors (see ServerConfigLockTransport).
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Disabled`	Disable Server Configuration Lock out-of-band acknowledge of "first-boot" audit.
`Enabled`	Enable Server Configuration Lock out-of-band acknowledge of "first-boot" audit.
`Null`	A value is temporarily unavailable

HpeServerDevice

@odata.type: "#HpeServerDevice.v2_1_0.HpeServerDevice"

The HpeServerDevice resource describes the properties of FRU devices.

This resource type was added in iLO 5 1.20

HpeServerDevice represents physical server devices including part information. This is especially useful for system inventory.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/devices/{item}`	GET PATCH

Links to other Resources

Link Name	Destination type
`DeviceInstances[]`	HpeServerPciDevice

DeviceInstances (array)

DeviceInstances is an array containing elements of:

DeviceInstances[{item}].@odata.id Member of HpeServerDevice.v2_1_0.HpeServerDevice


Type	string
Read Only	True
Format	uri-reference

DeviceType


Description	Device type.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`GPU`	GPU
`PLX Controller`	PLX Controller (Bridge)
`Expansion Riser`	Expansion Riser
`Smart Storage`	Smart Storage
`SAS/SATA Storage Controller`	SAS/SATA Storage Controller
`IDE Storage controller`
`USB Storage Controller`	USB Storage Controller
`Storage Controller`	Storage Controller
`LOM/NIC`	LOM/NIC
`Converged Network Adapter`	Converged Network Adapter
`Fibre Channel`	Fibre Channel
`Direct Attached NVMe Device`	Direct Attached NVMe Device
`Backplane PIC`	Backplane PIC
`Smart Storage Battery`	Smart Storage Battery
`USB`	Universal Serial Bus
`TPM`	Trusted Platform Module
`Communication Controller`	Communication Controller
`Unknown`	Unknown Device Type

FirmwareVersion

FirmwareVersion.Current FirmwareVersion.Current.VersionString Member of HpeServerDevice.v2_1_0.HpeServerDevice


Description	This string represents the version of the firmware image.
Type	string or null
Read Only	True

FirmwareVersion.FirmwareVersions (array) Member of HpeServerDevice.v2_1_0.HpeServerDevice

FirmwareVersions is an array containing elements of:

FirmwareVersions[{item}].ComponentName Member of HpeServerDevice.v2_1_0.HpeServerDevice


Description	Name of GPU cores
Type	string or null
Read Only	True

FirmwareVersions[{item}].VersionString Member of HpeServerDevice.v2_1_0.HpeServerDevice


Description	Version String of GPU cores
Type	string or null
Read Only	True

Location


Description	Location of the device.
Type	string or null
Read Only	True

MCTPProtocolDisabled


Description	Set to true to disable MCTP on this slot. Once disabled, can be enabled only through MCTP factory reset.
Type	boolean
Read Only	False

Manufacturer


Description	Device manufacturer.
Type	string or null
Read Only	True

PartNumber


Description	Board part Number which is HPE PCA Assembly Number.
Type	string or null
Read Only	True

ProductPartNumber


Description	Product Part Number.
Type	string or null
Read Only	True

ProductVersion


Description	Product Version.
Type	string or null
Read Only	True

SerialNumber


Description	Product Serial Number.
Type	string or null
Read Only	True

Status

Member of HpeServerDevice.v2_1_0.HpeServerDevice See the Redfish standard schema and specification for information on common Status object.

HpeServerDeviceCollection

@odata.type: "#HpeServerDeviceCollection.HpeServerDeviceCollection"

A Collection of HpeServerDevice resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/devices`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeServerDevice

Members (array)

Member of HpeServerDeviceCollection.HpeServerDeviceCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeServerDeviceCollection.HpeServerDeviceCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeServerDeviceCollection.HpeServerDeviceCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeServerPciDevice

@odata.type: "#HpeServerPciDevice.v2_0_0.HpeServerPciDevice"

The HpeServerPciDevice resource describes the properties of PCI devices.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/pcidevices/{item}`	GET

BayNumber

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	Bay number value.
Type	integer
Read Only	True
Added	iLO 5 1.10

Bifurcated

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	Indicates if the PCIe device support bifurcation.
Type	string
Read Only	True

The following are the supported values:

Value	Description
`BifurcationNotSupported`	This device does not support Bifurcation.
`BifurcationSupportedPrimaryDevice`	This device does support Bifurcation.
`BifurcationSupportedSecondaryDevice`	This is second bifurcated device.

BifurcatedSecondaryDeviceLink

The link to the next bifurcated devices. BifurcatedSecondaryDeviceLink is a link ("@odata.id": URI) to another resource.

BusNumber

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI device bus number value.
Type	integer
Read Only	True
Added	iLO 5 1.10

ClassCode

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI class code of the endpoint.
Type	integer
Read Only	True
Added	iLO 5 1.10

DeviceID

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI device ID of the device.
Type	integer
Read Only	True
Added	iLO 5 1.10

DeviceInstance

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI device instance value.
Type	integer
Read Only	True
Added	iLO 5 1.10

DeviceLocation

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI device location.
Type	string
Read Only	True
Added	iLO 5 1.10

DeviceNumber

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI device number value.
Type	integer
Read Only	True
Added	iLO 5 1.10

DeviceSubInstance

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI device sub-instance value.
Type	integer
Read Only	True
Added	iLO 5 1.10

DeviceType

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	Device type value.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Flexible LOM`	Flexible LAN-On-Motherboard
`Embedded LOM`	Embedded LAN-On-Motherboard
`NIC`	Network Interface Controller
`HDD Not attached to a SA Controller`	Hard Disk Drive
`HDD Attached to a SA Controller`	Hard Disk Drive attached to an array controller
`Other PCI Device`	Other PCI Device
`Unknown`	Unknown PCI Device
`Other`	Other PCI Device
`Video`	Video Controller
`SCSI Controller`	SCSI Controller
`Ethernet`	Ethernet Controller
`Token Ring`	Token Ring Controller
`Sound`	Sound Controller
`PATA Controller`	Parallel ATA Controller
`SATA Controller`	Serial ATA Controller
`SAS Controller`	Serial Attached SCSI Controller
`Storage Controller`	Storage Controller (not Smart Array)
`Storage Array Controller`	Smart Array Storage Controller
`USB Hard Disk Drive`	USB Hard Disk Drive
`Firmware Volume`	Firmware Volume
`UEFI Shell`	UEFI Shell
`Generic UEFI USB Boot Entry`	Generic UEFI USB Boot Entry
`Dynamic Storage Array Controller`	Dynamic Smart Array Controller
`File`	File
`NVMe Hard Drive`	NVMe Hard Drive
`NVDIMM`	NVDIMM

EnclosureNumber

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	Enclosure number value.
Type	integer
Read Only	True
Added	iLO 5 1.10

FunctionNumber

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI device function number value.
Type	integer
Read Only	True
Added	iLO 5 1.10

LocationString

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	Text representation of the UEFI device location, in UTF-8 format
Type	string
Read Only	True
Added	iLO 5 1.10

SegmentNumber

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI segment group number value.
Type	integer
Read Only	True
Added	iLO 5 1.10

StructuredName

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI device structured name in UTF-8 format.
Type	string
Read Only	True
Added	iLO 5 1.10

SubclassCode

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI sub class code of the endpoint.
Type	integer
Read Only	True
Added	iLO 5 1.10

SubsystemDeviceID

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI subsystem device ID of the device.
Type	integer
Read Only	True
Added	iLO 5 1.10

SubsystemVendorID

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI subsystem vendor ID of the device.
Type	integer
Read Only	True
Added	iLO 5 1.10

UEFIDevicePath

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	Standardized text representation of the UEFI device path, in UTF-8 format.
Type	string
Read Only	True
Added	iLO 5 1.10

VendorID

Member of HpeServerPciDevice.v2_0_0.HpeServerPciDevice


Description	PCI vendor ID of the device.
Type	integer
Read Only	True
Added	iLO 5 1.10

HpeServerPciDeviceCollection

@odata.type: "#HpeServerPciDeviceCollection.HpeServerPciDeviceCollection"

A Collection of HpeServerPciDevice resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/pcidevices`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeServerPciDevice

Members (array)

Member of HpeServerPciDeviceCollection.HpeServerPciDeviceCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeServerPciDeviceCollection.HpeServerPciDeviceCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeServerPciDeviceCollection.HpeServerPciDeviceCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeServerPCISlot

@odata.type: "#HpeServerPCISlot.v2_1_1.HpeServerPCISlot"

The HpeServerPCISlot resource describes the properties of PCI slots.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/pcislots/{item}`	GET

BusNumber


Description	PCI slot bus number.
Type	integer
Read Only	True
Added	iLO 5 1.20

Characteristics

Characteristics.Provides3_3Volts Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	Provides 3.3 volts.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Characteristics.Provides5Volts Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	Provides 5.0 volts.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Characteristics.SlotIsShared Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	The slot shares its opening with another slot.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Characteristics.SupportsCardBus Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	PC Card slot supports Card Bus.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Characteristics.SupportsHotPlugDevices Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	Slot supports hot-plug devices.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Characteristics.SupportsModemRingResume Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	PC Card slot supports Modem Ring Resume.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Characteristics.SupportsPCCard16 Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	PC Card slot supports PC Card-16.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Characteristics.SupportsPowerManagementEventSignal Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	PCI slot supports Power Management Event signal.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Characteristics.SupportsSMBusSignal Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	PCI slot supports SMBUS signal.
Type	boolean
Read Only	True
Added	iLO 5 1.20

Characteristics.SupportsZoomVideo Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot


Description	PC Card slot supports Zoom Video.
Type	boolean
Read Only	True
Added	iLO 5 1.20

DeviceNumber


Description	PCI slot device number.
Type	integer
Read Only	True
Added	iLO 5 1.20

FunctionNumber


Description	PCI slot function number.
Type	integer
Read Only	True
Added	iLO 5 1.20

Length


Description	PCI slot length
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value
`Short`
`Long`
`Other`

LinkLanes


Description	Bandwidth capacity of the slot, measured by the number of PCI Express Lanes present. Also known as the slot width.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value
`8 bit`
`16 bit`
`32 bit`
`64 bit`
`128 bit`
`x1`
`x2`
`x4`
`x8`
`x16`
`x32`
`Other`

Status

Member of HpeServerPCISlot.v2_1_1.HpeServerPCISlot See the Redfish standard schema and specification for information on common Status object.

SupportsHotPlug


Description	Specifies whether the slot supports hot-plug devices.
Type	boolean
Read Only	True
Added	iLO 5 1.10

Technology


Description	PCI technology
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value
`Proprietary`
`OCP NIC 3.0`
`PCIExpressGen5`
`PCIExpressGen4`
`PCIExpressGen3`
`PCIExpressGen2`
`PCIExpress`

UEFIDevicePath


Description	Standardized text representation of the UEFI device path, in UTF-8 format
Type	string
Read Only	True
Added	iLO 5 1.10

HpeServerPCISlotCollection

@odata.type: "#HpeServerPCISlotCollection.HpeServerPCISlotCollection"

A Collection of HpeServerPCISlot resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/pcislots`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeServerPCISlot

Members (array)

Member of HpeServerPCISlotCollection.HpeServerPCISlotCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeServerPCISlotCollection.HpeServerPCISlotCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeServerPCISlotCollection.HpeServerPCISlotCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeSmartStorage

@odata.type: "#HpeSmartStorage.v2_0_0.HpeSmartStorage"

The HpeSmartStorage resource describes the properties of the HPE Smart Storage controller,drives,and volumes.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage`	GET

Links to other Resources

Link Name	Destination type
`Links/ArrayControllers`	Collection of HpeSmartStorageArrayController
`Links/HostBusAdapters`	Collection of HpeSmartStorageHostBusAdapter

Status

Member of HpeSmartStorage.v2_0_0.HpeSmartStorage See the Redfish standard schema and specification for information on common Status object.

HpeSmartStorageArrayController

@odata.type: "#HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController"

The HpeSmartStorageArrayController resource describes the properties of the HPE Smart Storage controller,drives,and volumes.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}`	GET

Links to other Resources

Link Name	Destination type
`Links/LogicalDrives`	Collection of HpeSmartStorageLogicalDrive
`Links/PhysicalDrives`	Collection of HpeSmartStorageDiskDrive
`Links/StorageEnclosures`	Collection of HpeSmartStorageStorageEnclosure
`Links/UnconfiguredDrives`	Collection of HpeSmartStorageDiskDrive

AdapterType

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Type of Smart controller
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`SmartArray`	A controller that supports all SmartArray features and configuration
`SmartHBA`	A controller that functions natively as an HBA, but has a ValueRAID mode for basic RAID configuration
`DynamicSmartArray`	A controller that allows software RAID configuration

ArrayCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of arrays configured on this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

BackupPowerSourceStatus

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The current status of the backup power source (battery, capacitor, megacell etc.)
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Present`	The backup power source is present but charging information is unknown
`NotPresent`	The backup power source is not present
`PresentAndCharged`	The backup power source is present and fully charged
`PresentAndCharging`	The backup power source is present and is currently charging

BootVolumePrimary

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The primary boot volume of this controller
Type	string
Read Only	True
Added	iLO 5 1.10

BootVolumeSecondary

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The secondary boot volume of this controller
Type	string
Read Only	True
Added	iLO 5 1.10

CacheArrayCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of cache arrays configured on this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

CacheLogicalDriveCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of cache logical drives configured on this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

CacheMemorySizeMiB

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The total cache memory size for the controller in MiB
Type	integer
Read Only	True
Added	iLO 5 1.10

CacheModuleSerialNumber

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The serial number of the Cache Module.
Type	string
Read Only	True
Added	iLO 5 1.20

CacheModuleStatus

CacheModuleStatus.Health Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	This represents the health state of this resource in the absence of its dependent resources.
Type	string or null
Read Only	True
Added	iLO 5 1.40

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`OK`	Normal
`Warning`	A condition exists that requires attention
`Critical`	A critical condition exists that requires immediate attention

CacheModuleStatus.HealthRollup Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	This represents the overall health state from the view of this resource.
Type	string or null
Read Only	True
Added	iLO 5 1.40

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`OK`	Normal
`Warning`	A condition exists that requires attention
`Critical`	A critical condition exists that requires immediate attention

CacheModuleStatus.State Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	This indicates the known state of the resource, such as if it is enabled.
Type	string or null
Read Only	True
Added	iLO 5 1.40

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Enabled`	This function or resource has been enabled.
`Disabled`	This function or resource has been disabled.
`StandbyOffline`	This function or resource is enabled, but awaiting an external action to activate it.
`StandbySpare`	This function or resource is part of a redundancy set and is awaiting a failover or other external action to activate it.
`InTest`	This function or resource is undergoing testing.
`Starting`	This function or resource is starting.
`Absent`	This function or resource is not present or not detected.
`UnavailableOffline`	This function or resource is present but cannot be used.
`Deferring`	The element will not process any commands but will queue new requests.
`Quiesced`	The element is enabled but only processes a restricted set of commands.
`Updating`	The element is updating and may be unavailable or degraded.

CachePhysicalDriveCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of physical drives assigned as cache drives attached to this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

ControllerBoard

ControllerBoard.Status Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController See the Redfish standard schema and specification for information on common Status object.

ControllerPartNumber

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Smart Array Controller Part Number
Type	string
Read Only	True
Added	iLO 5 1.10

CurrentOperatingMode

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The current operating mode of the controller.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`RAID`	The controller is currently functioning in RAID mode
`HBA`	The controller is currently functioning in HBA mode
`Mixed`	The controller is currently functioning in Mixed mode

CurrentParallelSurfaceScanCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Number of disks the controller is scanning in parallel
Type	integer
Read Only	True
Added	iLO 5 1.10

DataLogicalDriveCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of data logical drives configured on this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

DataPhysicalDriveCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of physical drives assigned as data drives attached to this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

DegradedPerformanceOptimization

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Enables the controller to attempt to improve performance on RAID 5/50/6(ADG)/60 logical drives when one or more physical drives in the logical drive are failed
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Enabled`	The controller will attempt to improve performance by buffering physical drive requests
`Disabled`	The controller will not buffer, which may result in reading from the same drive multiple times

DriveWriteCache

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Enables or disables the write cache of the physical drives attached to the controller
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Enabled`	The write cache of the physical drives attached to the controller are enabled
`Disabled`	The write cache of the physical drives attached to the controller are enabled

DualModeControllerSupported

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller will support BMIC and RDE.
Type	boolean
Read Only	True

ElevatorSort

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Enables the controller to sort requests to a physical drive
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Enabled`	The controller will sort the requests to minimize the amount of seeking the drive must perform in order to reduce seek times
`Disabled`	The controller will perform the requests as they are recieved in order to improve request throughput

EncryptionBootPasswordSet

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if there is a boot password set, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionCryptoOfficerPasswordSet

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if a password has been set for the Encryption Crypto Officer, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionCspTestPassed

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the encryption CSP test passed, false otherwise.
Type	boolean
Read Only	True
Added	iLO 5 1.20

EncryptionEnabled

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if encryption is currently enabled for this controller, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionFwLocked

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller firmware has been locked, preventing firmware updates, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionHasLockedVolumes

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller has one or more volumes that are locked, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionHasLockedVolumesMissingBootPassword

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if there are locked drives due to a missing boot password, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionHasSuspendedVolumes

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller password has been temporarily suspended, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionKeySet

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the Master Key has been set, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.20

EncryptionLocalKeyCacheEnabled

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller caches encryption keys locally when a remote key manager is being used, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionMixedVolumesEnabled

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller will allow plaintext and encrypted volumes to exist simultaneously, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionPhysicalDriveCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of encrypted physical drives attached to the controller
Type	integer
Read Only	True
Added	iLO 5 1.10

EncryptionRecoveryParamsSet

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the encryption password recovery question and answer have been set, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionSelfTestPassed

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the encryption self test passed, false otherwise.
Type	boolean
Read Only	True
Added	iLO 5 1.20

EncryptionStandaloneModeEnabled

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller manages encryption keys locally, false if a remote key manager is being used
Type	boolean
Read Only	True
Added	iLO 5 1.10

EncryptionUserPasswordSet

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if a password has been set for the Encryption User, false otherwise.
Type	boolean
Read Only	True
Added	iLO 5 1.10

ExpandPriority

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The level of priority that transformations have over handling current operating system requests
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`High`	Transformations will complete as fast as possible at the expense of normal I/O
`Medium`	Transformations will perform with some impact on normal I/O
`Low`	Transformations will perform only when normal I/O is not occurring and may take longer to complete

ExternalPortCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of external ports
Type	integer
Read Only	True
Added	iLO 5 1.10

FirmwareVersion

FirmwareVersion.Current FirmwareVersion.Current.VersionString Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	This string represents the version of the firmware image.
Type	string or null
Read Only	True
Added	iLO 5 1.10

FlexibleLatencySchedulerSetting

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	This allows the controller to process certain high-latency requests after a delay that may time out when elevator sorting
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Default`	The controller will rely only on elevator sorting
`Low250`	The controller will apply a cutoff value of 250ms when suspending elevator sorting
`Middle100`	The controller will apply a cutoff value of 100ms when suspending elevator sorting
`Middle50`	The controller will apply a cutoff value of 50ms when suspending elevator sorting
`Aggressive30`	The controller will apply a cutoff value of 30ms when suspending elevator sorting
`Aggressive10`	The controller will apply a cutoff value of 10ms when suspending elevator sorting

HardwareRevision

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The hardware revision of the controller
Type	string
Read Only	True
Added	iLO 5 1.10

InconsistencyRepairPolicy

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Enables the controller to update data on RAID 6(ADG) and 60 volumes based on parity information when an inconsistency is discovered during surface scan
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Enabled`	The controller will update the data on the drives based on the parity information
`Disabled`	The controller will only update the parity information and leave the data untouched

InternalPortCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of internal ports
Type	integer
Read Only	True
Added	iLO 5 1.10

IsBootController

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if this controller is the OS boot controller, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

Location

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Location identifier
Type	string
Read Only	True
Added	iLO 5 1.10

LocationFormat

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Format for Location Identifier
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`PCISlot`	The PCI slot the controller is located at. For embedded controllers, the slot is 0

LogicalDriveCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of logical drives configured on this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

Manufacturer

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The manufacturer of the controller
Type	string
Read Only	True
Added	iLO 5 1.10

MaxParallelSurfaceScanCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Maximum number of disks that the controller supports scanning in parallel
Type	integer
Read Only	True
Added	iLO 5 1.10

Model

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The model number for the controller
Type	string
Read Only	True
Added	iLO 5 1.10

OperatingModeAfterReboot

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The operating mode the controller will be functioning in (RAID versus HBA) after a reboot
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`RAID`	The controller will be functioning in RAID mode after rebooting
`HBA`	The controller will be functioning in HBA mode after rebooting
`Mixed`	The controller will be functioning in Mixed mode after rebooting

ParallelSurfaceScanSupported

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller supports scanning multiple disk surfaces
Type	boolean
Read Only	True
Added	iLO 5 1.10

PhysicalDriveCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of physical drives attached to this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerModeAfterReboot

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The power mode of the controller after a reboot
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Invalid`	The controller will be operating in an unknown power mode after a reboot
`Low`	The controller will be operating in minimum power mode after a reboot
`LowAutomated`	The controller will be operating in a balanced mode after a reboot
`Performant`	The controller will be operating in maximum performance power mode after a reboot

PowerModeConfigured

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The current power mode of the controller
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Invalid`	The power mode can not be determined
`Low`	The controller is currently operating in minimum power mode
`LowAutomated`	The controller is currently operating in a balanced power mode
`Performant`	The controller is currently operating in maximum performance power mode

PowerModeWarningChangedDrive

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller's drive configuration has changed while using configuration based power settings, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

PowerModeWarningChangedMode

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller has a new power mode configured, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

PowerModeWarningReboot

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if a reboot is required to change the active power mode on the controller, false otherwise
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`NotRequired`	No reboot is required
`RequiredNoReason`	A reboot is required for the configured power mode on the controller
`RequiredPowerSavings`	Rebooting will enable additional power savings on the controller
`RequiredPerformance`	Rebooting will enhance the performance of the controller

PowerModeWarningTemperature

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller has crossed a critical temperature threshold and performance has been reduced to prevent damage to the controller, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

PredictiveSpareRebuild

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Enables or disables predictive spare rebuild mode
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Enabled`	Spare drives will replace physical drives that are predicted to fail preemptively
`Disabled`	Spare drives will replace physical drives only when they fail

QueueDepth

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	This sets the maximum number of requests the controller will submit to a drive at any given time
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`2`	2 requests
`4`	4 requests
`8`	8 requests
`16`	16 requests
`32`	32 requests
`Automatic`	Automatically determine the best queue depth for the controller

ReadCachePercent

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	This indicates the percentage of cache used for read cache on the controller, with the rest of the cache being used for write cache
Type	integer or null
Read Only	False
Added	iLO 5 1.20

RebuildPriority

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The level of priority that rebuilds have over handling current operating system requests
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`High`	Rebuilds will complete as fast as possible at the expense of normal I/O
`Medium`	Rebuilds will perform with some impact on normal I/O
`Low`	Rebuilds will perform only when normal I/O is not occurring and may take longer to complete
`RapidHigh`	Rebuilds will complete as fast as possible at the expense of normal I/O
`RapidMediumHigh`	Rebuilds will perform with an impact on normal I/O
`RapidMedium`	Rebuilds will perform with some impact on normal I/O
`RapidLow`	Rebuilds will perform only when normal I/O is not occurring and may take longer to complete

SerialNumber

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The serial number for this controller
Type	string
Read Only	True
Added	iLO 5 1.10

SoftwareRaidHbaFirmwareRev

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The firmware version of the underlying HBA that is being used by the software RAID stack
Type	string
Read Only	True
Added	iLO 5 1.10

SoftwareRaidHbaModeOptionRomRev

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The option ROM firmware version used to bootstrap the software RAID stack
Type	string
Read Only	True
Added	iLO 5 1.10

SparePhysicalDriveCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	he number of physical drives assigned as spare drives attached to this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

Status

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController See the Redfish standard schema and specification for information on common Status object.

SupportedOperatingModes (array)

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController

SupportedOperatingModes is an array containing elements of:


Type	string
Read Only	True

The following are the supported values:

Value	Description
`RAID`	The controller supports functioning in RAID mode
`HBA`	The controller supports functioning in HBA mode
`Mixed`	The controller supports functioning in Mixed mode

SupportedPowerModes (array)

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController

SupportedPowerModes is an array containing elements of:


Type	string
Read Only	True

The following are the supported values:

Value	Description
`Low`	The controller is currently operating in minimum power mode
`LowAutomated`	The controller is currently operating in a balanced power mode
`Performant`	The controller is currently operating in maximum performance power mode

SupportedRaidLevels (array)

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController

SupportedRaidLevels is an array containing elements of:


Type	string
Read Only	True

The following are the supported values:

Value	Description
`0`	There is no fault tolerance used on the logical drive
`1`	Two sets of duplicate data is being stored on a pair of drives
`1ADM`	Three sets of duplicate data is being stored on a trio of drives
`10`	Data is duplicated and striped across pairs of disk drives
`10ADM`	Data is duplicated and striped across trios of disk drives
`5`	Fault tolerance is achieved by storing parity data across 3 or more disk drives
`50`	Fault tolerance is achieved by storing parity data and striping the data across 6 or more disk drives
`6`	Fault tolerance is achieved by storing multiple sets parity data across 4 or more disk drives
`60`	Fault tolerance is achieved by storing multiple sets parity data and striping the data across 8 or more disk drives

SurfaceScanAnalysisPriority

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	Priority that the controller takes to find and correct disk surface errors
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Disabled`	Surface scan is disabled and may lead to data loss
`High`	Surface scan commands will be sent with the host I/O, resulting in faster scanning, but may inpact host I/O performance
`Medium`	Surface scan commands have a medium priority, and will have some impact on host I/O performance
`Low`	Surface scan commands have a low priority, and will have little impact on host I/O performance
`Idle`	Surface scan commands will ony be issued when no host I/O is present after a delay

UnassignedPhysicalDriveCount

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	The number of unassigned physical drives attached to this controller
Type	integer
Read Only	True
Added	iLO 5 1.10

WriteCacheBypassThresholdKB

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	This value sets the write cache bypass threshold, ranging from 16 KB to 1040 KB in multiples of 16 KB, where all writes larger than the specified value in KB units will bypass the write cache and be written directly to the disk for non-parity RAID volumes.
Type	integer or null
Read Only	True
Added	iLO 5 1.20

WriteCacheWithoutBackupPowerEnabled

Member of HpeSmartStorageArrayController.v2_2_0.HpeSmartStorageArrayController


Description	True if the controller will continue to use write cache even if the backup power source is not available. False, otherwise.
Type	boolean
Read Only	True
Added	iLO 5 1.20

HpeSmartStorageArrayControllerCollection

@odata.type: "#HpeSmartStorageArrayControllerCollection.HpeSmartStorageArrayControllerCollection"

A Collection of HpeSmartStorageArrayController resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSmartStorageArrayController

Members (array)

Member of HpeSmartStorageArrayControllerCollection.HpeSmartStorageArrayControllerCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSmartStorageArrayControllerCollection.HpeSmartStorageArrayControllerCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeSmartStorageArrayControllerCollection.HpeSmartStorageArrayControllerCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeSmartStorageDiskDrive

@odata.type: "#HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive"

The HpeSmartStorageDiskDrive resource describes the properties of the HPE Smart Storage controller,drives,and volumes.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/diskdrives/{item}`	GET
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/unconfigureddrives/{item}`
`/redfish/v1/systems/{item}/smartstorage/hostbusadapters/{item}/diskdrives/{item}`

BlockSizeBytes

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Block size of the drive in bytes. This is the block size presented by the drive to clients such as the array controller or operating system.
Type	integer
Read Only	True
Added	iLO 5 1.10

CapacityGB

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Total capacity of the drive in GB. This denotes the marketing capacity (base 10)
Type	integer
Read Only	True
Added	iLO 5 1.10

CapacityLogicalBlocks

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Total number of logical blocks in the drive
Type	integer
Read Only	True
Added	iLO 5 1.10

CapacityMiB

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Total capacity of the drive in MiB
Type	integer
Read Only	True
Added	iLO 5 1.10

CarrierApplicationVersion

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Carrier PIC firmware version currently running
Type	string
Read Only	True
Added	iLO 5 1.10

CarrierAuthenticationStatus

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Authentication status of the drive carrier
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`OK`	Carrier authenticated as genuine HPE product
`Fail`	Carrier authentication failed
`NoCommunication`	Communication could not be established with the carrier
`NotApplicable`	Carrier does not support authentication

CurrentTemperatureCelsius

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The current temperature of the drive
Type	integer
Read Only	True
Added	iLO 5 1.10

DiskDriveStatusReasons (array)

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive

DiskDriveStatusReasons is an array containing elements of:


Type	string
Read Only	True

The following are the supported values:

Value	Description
`None`	No status reason available
`Unknown`	Reason is unknown
`CommunicationFailure`	Cannot communicate with drive
`Zoned`	Drive is currently zoned, only basic information can be displayed
`EraseInProgress`	Drive is currently in process of an erase operation
`QueuedForErase`	Drive is currently queued for an erase operation
`EraseCompleted`	Drive has completed the erase operation
`EraseFailed`	The erase operation has failed for the drive
`EraseAborted`	The erase operation was aborted
`Failed`	The drive has failed
`NonAuthenticDrive`	The drive is not an authentic drive
`CarrierCommunicationFailure`	The drive carrier has a communication fault
`PredictiveFail`	Drive failure is imminent
`NotSupported`	The drive is not supported by the controller
`SizeNotValid`	The drive size is invalid. Typically occurs if a drive part of a raid volume is replaced with a smaller sized drive
`FailedDueToPredictiveSpareActivation`	The drive was failed due to a predictive spare activation
`Rebuilding`	The drive is currently rebuilding
`TransientDataDrive`	The drive is part of a volume that is currently undergoing a transformation. After the transformation is complete the drive's state will change
`Unrecoverable`	The drive is in an unrecoverable condition

DiskDriveUse

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The current use of the physical drive.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Data`	It is a Data drive which is a part of an array.
`Spare`	It is a spare drive which is a part of an array.
`Raw`	Indicates the drive is available to the OS via HBA mode on the controller.
`Unconfigured`	Indicates the drive is not available to the OS as controller is in RAID mode.
`Unknown`	The current use of the disk drive is not known.

EncryptedDrive

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	True if encryption is currently enabled on this disk drive, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

EraseCompletionPercentage

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The percent complete for an erase operation currently occurring on the disk drive or null if not currently erasing a drive.
Type	integer or null
Read Only	True
Added	iLO 5 1.10

ErasePattern

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The pattern used for erasing the disk drive
Type	string
Read Only	True
Added	iLO 5 1.10

FirmwareVersion

FirmwareVersion.Current FirmwareVersion.Current.VersionString Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	This string represents the version of the firmware image.
Type	string or null
Read Only	True
Added	iLO 5 1.10

IndicatorLED

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The state of the indicator LED.
Type	string or null
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Unknown`	The state of the Indicator LED cannot be determined.
`Lit`	The Indicator LED is lit.
`Blinking`	The Indicator LED is blinking.
`Off`	The Indicator LED is off.

InterfaceSpeedMbps

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Native interface speed for the device
Type	integer
Read Only	True
Added	iLO 5 1.10

InterfaceType

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The connection interface of the drive. The value NVME has been deprecated.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`SAS`	SAS
`SATA`	SATA
`NVME`	Non-volatile memory (deprecated)
`PCIe`	PCIe interface
`Unknown`	Information is unavailable

LegacyBootPriority

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	This indicates that the array controller should provide legacy boot support.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Primary`	This indicates that the array controller should provide legacy boot support (Interrupt 13h BIOS support) for this physical drive. The physical drive will be listed as first in the LUN list returned via SCSI commands
`Secondary`	This indicates that the array controller should provide legacy boot support (Interrupt 13h BIOS support) for this physical drive. The physical drive will be listed as second in the LUN list returned via SCSI commands
`None`	Legacy boot not supported on this physical drive

Location

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The location of the drive
Type	string
Read Only	True
Added	iLO 5 1.10

LocationFormat

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Format for the location property
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`ControllerPort:Box:Bay`	This format typically used in controller context where the drive would be identified using the controller port, JBOD box number and drive bay
`SwitchPort:Box:Bay`	This format typically used in a SAS switch context where the drive would be identified using the switch port, JBOD box number and drive bay
`SwitchPort:SwitchBay:Bay`	This format typically used in a SAS switch context where the drive would be identified using the switch port, ICM bay number for the switch and drive bay

Manufacturer

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Manufacturer of the disk drive
Type	string
Read Only	True
Added	iLO 5 1.10

MaximumTemperatureCelsius

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The maximum recommended temperature for the drive
Type	integer
Read Only	True
Added	iLO 5 1.10

MediaType

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Type of disk
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`HDD`	The drive media type is traditional magnetic platters
`SSD`	The drive media type is solid state or flash memory
`SMR`	The drive media type is shingled magnetic recording

MinimumGoodFirmwareVersion

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The minimum recommended firmware revision for the drive
Type	string
Read Only	True
Added	iLO 5 1.10

Model

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Drive model number
Type	string
Read Only	True
Added	iLO 5 1.10

NativeBlockSizeBytes

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Native block size of the drive in bytes. This is the underlying sector size used by the physical drive to store data. For example, an advanced format drive that uses 4K sector sizes to store data will return 4K as the NativeBlockSizeBytes but may return 512 for the BlockSizeBytes when running in 512e (emulation) mode for backward compatibility
Type	integer
Read Only	True
Added	iLO 5 1.10

PhyCount

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The number of phys the drive has
Type	integer
Read Only	True
Added	iLO 5 1.10

PortCount

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The number of ports on the drive. Typically 1 (single-domain) or 2 (dual-domain)
Type	integer
Read Only	True
Added	iLO 5 1.10

PowerOnHours

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The number of lifetime hours that the drive has been powered on. The value is null if the disk power on hours cannot be determined or is not supported.
Type	integer or null
Read Only	True
Added	iLO 5 1.10

RotationalSpeedRpm

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The rotational speed of the drive, only applicable on HDDs
Type	integer
Read Only	True
Added	iLO 5 1.10

SSDEnduranceUtilizationPercentage

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	This is the percentage of the drive that has been worn out and can no longer be used. When this values reaches 100%, the drive has 0% usage remaining and is completely worn out. The value is null if percent endurance used cannot be determined or is not supported.
Type	integer or null
Read Only	True
Added	iLO 5 1.10

SerialNumber

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The serial number of the drive
Type	string
Read Only	True
Added	iLO 5 1.10

SpareRebuildMode

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Method to used activate this drive when another drive fails, this is only applicable if the drive is configured as a spare drive
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Dedicated`	This drive will take over a failed drive temporarily. When the failed drive is replaced, this will return to being a spare. This drive be shared between arrays.
`Roaming`	This drive will permanently replace a failed drive. The failed drive will become a spare. This spare drive cannot be shared between arrays.

Status

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive See the Redfish standard schema and specification for information on common Status object.

TransferSpeedMbps

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Effective transfer speed to the device taking into account hardware acceleration such as edge-buffering
Type	integer
Read Only	True
Added	iLO 5 1.10

UncorrectedReadErrors

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The number of read errors that have occurred on a drive that could not be recovered by a drive's Error Correction Code (ECC) algorithm or through retries. Over time, a drive may produce these errors, and a problem may exist. The value increases every time the physical drive detects another error. The severity of these errors depends on if the drive is in a fault tolerant mode and the controller can remap data to eliminate problems. If an increase in this counter is seen, run diagnostics on the drive
Type	integer
Read Only	True
Added	iLO 5 1.40

UncorrectedWriteErrors

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	The number of write errors that have occurred on a drive that could not be recovered through retries. Over time, a drive may produce these errors, and a problem may exist. The value increases every time the physical drive detects another error. If an increase in this counter is seen, run diagnostics on the drive.
Type	integer
Read Only	True
Added	iLO 5 1.40

WWID

Member of HpeSmartStorageDiskDrive.v2_1_0.HpeSmartStorageDiskDrive


Description	Unique identifier for the device
Type	string
Read Only	True
Added	iLO 5 1.10

HpeSmartStorageDiskDriveCollection

@odata.type: "#HpeSmartStorageDiskDriveCollection.HpeSmartStorageDiskDriveCollection"

A Collection of HpeSmartStorageDiskDrive resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/diskdrives`	GET
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/logicaldrives/{item}/activesparedrives`	GET
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/logicaldrives/{item}/datadrives`	GET
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/logicaldrives/{item}/standbysparedrives`	GET
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/unconfigureddrives`	GET
`/redfish/v1/systems/{item}/smartstorage/hostbusadapters/{item}/diskdrives`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSmartStorageDiskDrive

Members (array)

Member of HpeSmartStorageDiskDriveCollection.HpeSmartStorageDiskDriveCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSmartStorageDiskDriveCollection.HpeSmartStorageDiskDriveCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeSmartStorageDiskDriveCollection.HpeSmartStorageDiskDriveCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeSmartStorageHostBusAdapter

@odata.type: "#HpeSmartStorageHostBusAdapter.v2_0_0.HpeSmartStorageHostBusAdapter"

The HpeSmartStorageHostBusAdapter resource describes the properties of the HPE Smart Storage controller,drives,and volumes.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/hostbusadapters/{item}`	GET

Links to other Resources

Link Name	Destination type
`Links/Drives`	Collection of HpeSmartStorageDiskDrive

FirmwareVersion

FirmwareVersion.Current FirmwareVersion.Current.VersionString Member of HpeSmartStorageHostBusAdapter.v2_0_0.HpeSmartStorageHostBusAdapter


Description	This string represents the version of the firmware image.
Type	string or null
Read Only	True
Added	iLO 5 1.10

HardwareRevision

Member of HpeSmartStorageHostBusAdapter.v2_0_0.HpeSmartStorageHostBusAdapter


Description	The hardware revision of the controller
Type	string
Read Only	True
Added	iLO 5 1.10

Location

Member of HpeSmartStorageHostBusAdapter.v2_0_0.HpeSmartStorageHostBusAdapter


Description	Location identifier
Type	string
Read Only	True
Added	iLO 5 1.10

LocationFormat

Member of HpeSmartStorageHostBusAdapter.v2_0_0.HpeSmartStorageHostBusAdapter


Description	Format for Location Identifier
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`PCISlot`	The PCI slot the controller is located at. For embedded controllers, the slot is 0

Manufacturer

Member of HpeSmartStorageHostBusAdapter.v2_0_0.HpeSmartStorageHostBusAdapter


Description	The manufacturer of the controller
Type	string
Read Only	True
Added	iLO 5 1.10

Model

Member of HpeSmartStorageHostBusAdapter.v2_0_0.HpeSmartStorageHostBusAdapter


Description	The model number for the controller
Type	string
Read Only	True
Added	iLO 5 1.10

SerialNumber

Member of HpeSmartStorageHostBusAdapter.v2_0_0.HpeSmartStorageHostBusAdapter


Description	The serial number for this controller
Type	string
Read Only	True
Added	iLO 5 1.10

Status

Member of HpeSmartStorageHostBusAdapter.v2_0_0.HpeSmartStorageHostBusAdapter See the Redfish standard schema and specification for information on common Status object.

HpeSmartStorageHostBusAdapterCollection

@odata.type: "#HpeSmartStorageHostBusAdapterCollection.HpeSmartStorageHostBusAdapterCollection"

A Collection of HpeSmartStorageHostBusAdapter resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/hostbusadapters`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSmartStorageHostBusAdapter

Members (array)

Member of HpeSmartStorageHostBusAdapterCollection.HpeSmartStorageHostBusAdapterCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSmartStorageHostBusAdapterCollection.HpeSmartStorageHostBusAdapterCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeSmartStorageHostBusAdapterCollection.HpeSmartStorageHostBusAdapterCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeSmartStorageLogicalDrive

@odata.type: "#HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive"

The HpeSmartStorageLogicalDrive resource describes the properties of the HPE Smart Storage controller,drives,and volumes.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/logicaldrives/{item}`	GET

Links to other Resources

Link Name	Destination type
`Links/DataDrives`	Collection of HpeSmartStorageDiskDrive
`Links/ActiveSpareDrives`	Collection of HpeSmartStorageDiskDrive
`Links/StandbySpareDrives`	Collection of HpeSmartStorageDiskDrive

AccelerationMethod

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The acceleration method of the logical drive
Type	string
Read Only	True
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`None`	Logical drive acceleration is disabled
`ControllerCache`	Reads and writes to the logical drive are being cached by the controller.
`IOBypass`	For logical drives on SSDs, read and write information directly from the drive.
`SmartCache`	Reads and writes to the logical drive are being cached by a caching logical drive.

BlockSizeBytes

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The block size of the disk drive in bytes
Type	integer
Read Only	True
Added	iLO 5 1.10

CapacityMiB

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	Total usable capacity available on this logical drive in MiB units
Type	integer
Read Only	True
Added	iLO 5 1.10

DriveAccessName

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The access ID of the logical drive given by the OS
Type	string
Read Only	True
Added	iLO 5 1.10

DriveGeometryCylinders

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The number of cylinders on the drive
Type	string
Read Only	True
Added	iLO 5 1.10

DriveGeometryHeads

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The number of heads on the drive
Type	string
Read Only	True
Added	iLO 5 1.10

DriveGeometrySectors

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The number of sectors on the drive
Type	string
Read Only	True
Added	iLO 5 1.10

InterfaceType

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The connection interface of the logical drive.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`SAS`	SAS
`SATA`	SATA
`Mixed`	Contains both SAS and SATA.
`NVMe`	NVMe
`Unknown`	Information is unavailable

LegacyBootPriority

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Primary`	This indicates that the array controller should provide legacy boot support (Interrupt 13h BIOS support) for this logical drive. The logical drive will be listed as first in the LUN list returned via SCSI commands
`Secondary`	This indicates that the array controller should provide legacy boot support (Interrupt 13h BIOS support) for this logical drive. The logical drive will be listed as second in the LUN list returned via SCSI commands
`None`	Legacy boot not supported on this logical drive

LogicalDriveEncryption

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	True if encryption is currently enabled on this logical drive, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

LogicalDriveEncryptionDataKeysVolatile

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	True if volatile keys are enabled for encryption, false otherwise
Type	boolean
Read Only	True
Added	iLO 5 1.10

LogicalDriveEncryptionDataKeysVolatileBackup

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	True if volatile keys are backed up to a remote key manager, false if volatile keys are not backed up
Type	boolean
Read Only	True
Added	iLO 5 1.10

LogicalDriveEncryptionDataKeysVolatileStatus

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The status of the encryption volatile keys
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`NoOp`	No operations are pending for the volatile keys
`BackupInProgress`	The volatile keys are being backed up to a remote key manager
`BackupAndSetInProgress`	The volatile keys are being set and being backed up to a remote key manager
`RestoreInProgress`	The volatile keys are being restored from a remote key manager
`DeleteInProgress`	The volatile keys are being removed

LogicalDriveName

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	Label given to the logical drive
Type	string
Read Only	True
Added	iLO 5 1.10

LogicalDriveNumber

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	logical drive number
Type	integer
Read Only	True
Added	iLO 5 1.10

LogicalDriveStatusReasons (array)

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive

LogicalDriveStatusReasons is an array containing elements of:


Type	string
Read Only	True

The following are the supported values:

Value	Description
`Unknown`	The state of the logical drive is unknown
`Ok`	The logical drive is in normal operation mode
`Failed`	Indicates that more physical drives have failed than the fault tolerance mode of the logical drive can handle without data loss
`Unconfigured`	The logical drive is not configured
`Recovering`	The logical drive is using Interim Recovery Mode. In Interim Recovery Mode, at least one physical drive has failed, but the logical drive's fault tolerance mode lets the drive continue to operate with no data loss
`ReadyForRebuild`	The logical drive is ready for Automatic Data Recovery. A failed physical drive has been replaced, but the logical drive is still operating in Interim Recovery Mode
`Rebuilding`	The logical drive is currently doing Automatic Data Recovery, where fault tolerance algorithms restore data to the replacement drive
`WrongDrive`	The wrong physical drive was replaced after a failure
`BadConnect`	A physical drive is not responding
`Overheating`	The drive array enclosure that contains the logical drive is overheating. The drive array is still functional, but should be shutdown
`Shutdown`	The drive array enclosure that contains the logical drive has overheated. The logical drive is no longer functional
`Expanding`	The logical drive is currently undergoing a transformation (expansion, shrinkage or movement). During transformation, fault tolerance algorithms redistribute logical drive data according to the transformation operation selected
`NotAvailable`	The logical drive is currently unavailable. If a logical drive is expanding and the new configuration frees additional disk space, this free space can be configured into another logical volume. If this is done, the new volume will be set to not available
`QueuedForExpansion`	The logical drive is ready for transformation (expansion, shrinkage or movement). The logical drive is in the queue for transformation
`MultipathAccessDegraded`	Previously all disk drives of this logical drive had more than one I/O path to the controller, but now one or few of them have only one I/O path
`Erasing`	The logical drive is currently being erased
`PredictiveSpareRebuildReady`	The logical drive is ready to perform a predictive spare rebuild. The logical drive is in the queue for rebuild
`RapidParityInitInProgress`	The logical drive is currently undergoing rapid parity initialization (RPI). The logical drive is unavailable to the operating system during RPI and will be made available once RPI has completed
`RapidParityInitPending`	The logical drive is currently pending RPI and will be unavailable
`NoAccessEncryptedNoControllerKey`	The logical drive is currently encrypted and cannot be accessed because the array controller has not yet received the encryption key nor was it found in the controller's CSP NVRAM
`UnencryptedToEncryptedInProgress`	The logical drive is currently being transformed from unencrypted to encrypted and the volume is online. Data will be written unencrypted if the write is directed to an LBA range on th e logical drive that has not yet been migrated
`NewKeyRekeyInProgress`	The logical drive is currently encrypted and all data is currently being rekeyed with a new logical drive key using the background capacity expansion transformation task. The logical drive is online
`NoAccessEncryptedControllerEncryptionNotEnabled`	The logical drive is currently encrypted and cannot be accessed because the array controller does not have encryption enabled
`UnencryptedToEncryptedNotStarted`	The logical drive has received a request to transform from unencrypted to encrypted but this process has not yet started. The unencrypted logical drive is currently online
`NewLogDrvKeyRekeyRequestReceived`	The logical drive is encrypted and has received a request to rekey all data with a new logical drive encryption key. The logical drive is online
`Unsupproted`	The state of the logical drive is unsupported
`Offline`	Logical volume is comprised of one or more Locked SEDs. Volume is offline
`SEDQualinprogress`	Logical volume SED Qualification is in progress
`SEDQualFailed`	Logical volume SED Qualification failed

LogicalDriveType

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	How the logical drive is being used
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Data`	The drive is being used as a storage drive
`Cache`	The drive is being used as a cache drive for a different storage drive
`SplitMirrorSetPrimary`	This drive is being used as the primary storage drive of a split mirror set after a Split Mirror Array has been performed
`SplitMirrorSetBackup`	This drive is being used as the backup storage drive of a split mirror set after a Split Mirror Array has been performed
`SplitMirrorSetBackupOrphan`	This drive was being used as the backup storage drive of a split mirror set that no longer exists

MediaType

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	Type of the disk this logical drive is associated with.
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`HDD`	Spinning disk hard drive.
`SSD`	Solid state disk.
`SMR`	Shingled Magnetic Recording.
`Mixed`	Contains both HDD and SSD.
`Unknown`	Information is unavailable

ParityInitializationCompletionPercentage

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	Parity initialization complete percentage for a parity based logical drive (e.g. RAID 5)
Type	integer
Read Only	True
Added	iLO 5 1.10

ParityInitializationType

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	When creating a logical drive with a RAID level that requires parity, parity blocks can be initialized with two different methods
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Default`	Parity blocks are initialized in the background and the logical drive is available during this time
`Rapid`	Both data and parity blocks are initialized in the foreground and the logical drive will not be available to the operating system until initialization completes

PartitionInformation

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	OS partition information for the drive
Type	string
Read Only	True
Added	iLO 5 1.10

Raid

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The current RAID level configured on the logical drive
Type	string
Read Only	True

The following are the supported values:

Value	Description
`0`	There is no fault tolerance used on this logical drive
`1`	Two sets of duplicate data is being stored on a pair of drives
`1ADM`	Three sets of duplicate data is being stored on a trio of drives
`10`	Data is duplicated and striped across pairs of disk drives
`10ADM`	Data is duplicated and striped across trios of disk drives
`5`	Fault tolerance is achieved by storing parity data across 3 or more disk drives
`50`	Fault tolerance is achieved by storing parity data and striping the data across 6 or more disk drives
`6`	Fault tolerance is achieved by storing multiple sets parity data across 4 or more disk drives
`60`	Fault tolerance is achieved by storing multiple sets parity data and striping the data across 8 or more disk drives

RebuildCompletionPercentage

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The percent complete for a rebuild operation currently occurring on the logical drive
Type	integer
Read Only	True
Added	iLO 5 1.10

SmartCacheState

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The state of the SmartCache cache. This is valid if this drive either is a cache drive, or has a cache drive attached to it
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Good`	The cache is functioning properly
`Limited`	The cache is functioning in a degraded mode, and may not be functioning at maximum performance
`DDRUnsafe`	The DDR is unsafe for the cache drive
`CacheLUNOffline`	The cache drive is offline
`PrimaryLUNOffline`	The primary logical drive that is being cached is offline
`Destroyed`	The cache is destroyed and not functional
`Flushing`	The cache drive is flushing
`Configuring`	The caching pair is being configured
`PairFailAtPowerup`	The primary and cache drive were unable to be paired at powerup
`Unknown`	The state of the cache is unknown

Status

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive See the Redfish standard schema and specification for information on common Status object.

StripSizeBytes

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The strip size of the logical drive in bytes
Type	integer
Read Only	True
Added	iLO 5 1.10

StripeSizeBytes

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The stripe size of the logical drive in bytes
Type	integer
Read Only	True
Added	iLO 5 1.10

TransformationCompletionPercentage

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	The percent complete for any transformations the logical drive may be undergoing such as RAID migration, stripesize migration, capacity expansion etc.
Type	integer
Read Only	True
Added	iLO 5 1.10

VolumeUniqueIdentifier

Member of HpeSmartStorageLogicalDrive.v2_3_0.HpeSmartStorageLogicalDrive


Description	An identifier (typically SCSI Inquiry based such as Inquiry VPD Page 0x83 NAA 64 identifier) used to uniquely identify this volume.
Type	string
Read Only	True
Added	iLO 5 1.10

HpeSmartStorageLogicalDriveCollection

@odata.type: "#HpeSmartStorageLogicalDriveCollection.HpeSmartStorageLogicalDriveCollection"

A Collection of HpeSmartStorageLogicalDrive resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/logicaldrives`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSmartStorageLogicalDrive

Members (array)

Member of HpeSmartStorageLogicalDriveCollection.HpeSmartStorageLogicalDriveCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSmartStorageLogicalDriveCollection.HpeSmartStorageLogicalDriveCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeSmartStorageLogicalDriveCollection.HpeSmartStorageLogicalDriveCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeSmartStorageStorageEnclosure

@odata.type: "#HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure"

The HpeSmartStorageStorageEnclosure resource describes the properties of the HPE Smart Storage controller,drives,and volumes.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/storageenclosures/{item}`	GET

DoorLockLED

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	The state of the Door Lock LED. When Lit, this indicates that the Enclosure should not be removed since the drives are currently in use.
Type	string or null
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Unknown`	The state of the Door Lock LED cannot be determined.
`Lit`	The Door Lock LED is lit.
`Off`	The Door Lock LED is off.

DriveBayCount

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	Number of drive bays supported within the storage enclosure
Type	integer
Read Only	True
Added	iLO 5 1.10

EnclosureLogicalID

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	Unique ID for the storage enclosure
Type	string
Read Only	True
Added	iLO 5 1.10

FaultLED

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	The state of the Fault LED.
Type	string or null
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Unknown`	The state of the Fault LED cannot be determined.
`Lit`	The Fault LED is lit.
`Off`	The Fault LED is off.

FirmwareVersion

FirmwareVersion.Current FirmwareVersion.Current.VersionString Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	This string represents the version of the firmware image.
Type	string or null
Read Only	True
Added	iLO 5 1.10

IndicatorLED

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	The state of the indicator LED.
Type	string or null
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Unknown`	The state of the Indicator LED cannot be determined.
`Lit`	The Indicator LED is lit.
`Blinking`	The Indicator LED is blinking.
`Off`	The Indicator LED is off.

Location

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	Location identifier
Type	string
Read Only	True
Added	iLO 5 1.10

LocationFormat

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	Format for Location Identifier
Type	string
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Port:Box`	This format typically used in controller context where the drive would be identified using the controller port and JBOD box number
`SwitchPort:Box`	This format typically used in a SAS switch context where the drive would be identified using the switch port and JBOD box number
`SwitchPort:SwitchBay`	This format typically used in a SAS switch context where the drive would be identified using the switch port and ICM bay number for the switch

Manufacturer

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	The manufacturer of the storage enclosure
Type	string
Read Only	True
Added	iLO 5 1.10

Model

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	The model string for the storage enclosure
Type	string
Read Only	True
Added	iLO 5 1.10

PartNumber

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	Part number of this storage enclosure
Type	string
Read Only	True
Added	iLO 5 1.10

SKU

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	SKU for the storage enclosure
Type	string
Read Only	True
Added	iLO 5 1.10

SerialNumber

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	The serial number for this storage enclosure
Type	string
Read Only	True
Added	iLO 5 1.10

Status

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure See the Redfish standard schema and specification for information on common Status object.

SubEnclosureLocation

Member of HpeSmartStorageStorageEnclosure.v2_0_0.HpeSmartStorageStorageEnclosure


Description	Location within the chassis if this storage enclosure is part of a larger chassis hosting multiple storage enclosures
Type	string
Read Only	True
Added	iLO 5 1.10

HpeSmartStorageStorageEnclosureCollection

@odata.type: "#HpeSmartStorageStorageEnclosureCollection.HpeSmartStorageStorageEnclosureCollection"

A Collection of HpeSmartStorageStorageEnclosure resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/smartstorage/arraycontrollers/{item}/storageenclosures`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSmartStorageStorageEnclosure

Members (array)

Member of HpeSmartStorageStorageEnclosureCollection.HpeSmartStorageStorageEnclosureCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSmartStorageStorageEnclosureCollection.HpeSmartStorageStorageEnclosureCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeSmartStorageStorageEnclosureCollection.HpeSmartStorageStorageEnclosureCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeSNMPAlertDestination

@odata.type: "#HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination"

The HpeSNMPAlertDestination resource describes the properties for SNMP Alert Destinations. The alert destination configuration up to 8 remote management systems that receive SNMP alerts from the BMC.

This resource type was added in iLO 5 1.20

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice/snmpalertdestinations/{item}`	GET PATCH DELETE

AlertDestination

Member of HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination


Description	The IP address or FQDN of remote management system that receive SNMP alerts.
Type	string
Read Only	False
Added	iLO 5 1.20

SNMPAlertProtocol

Member of HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination


Description	Indicate the SNMP protocol associated with the AlertDestination.
Type	string or null
Read Only	False
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`SNMPv1Trap`	Indicate SNMPv1 trap is enabled for the destination.
`SNMPv3Trap`	Indicate SNMPv3 trap is enabled for the destination. Needs to fill the SecurityName as well.
`SNMPv3Inform`	Indicate SNMPv3 Inform is enabled for the destination. Needs to fill the SecurityName as well.
`Null`	A value is temporarily unavailable

SNMPv3User

SNMPv3 User associated with the destination when SNMP alert protocol is SNMPv3trap. SNMPv3User is a link ("@odata.id": URI) to another resource.

SecurityName

Member of HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination


Description	Provides the SNMPv3 security name associated with SNMPv3trap or SNMPv3Inform set on SNMPAlertProtocol.
Type	string or null
Read Only	False
Added	iLO 5 1.20

TrapCommunity

Member of HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination


Description	The configured SNMPv1 trap community string.
Type	string
Read Only	False
Added	iLO 5 1.20

HpeSNMPAlertDestinationCollection

@odata.type: "#HpeSNMPAlertDestinationCollection.HpeSNMPAlertDestinationCollection"

A Collection of HpeSNMPAlertDestination resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice/snmpalertdestinations`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSNMPAlertDestination

Members (array)

Member of HpeSNMPAlertDestinationCollection.HpeSNMPAlertDestinationCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSNMPAlertDestinationCollection.HpeSNMPAlertDestinationCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeSNMPAlertDestinationCollection.HpeSNMPAlertDestinationCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeSNMPUser

@odata.type: "#HpeSNMPUser.v2_1_1.HpeSNMPUser"

The HpeSNMPUser resource describes the properties for SNMP support. SNMPv3 supports the User-based Security Model (USM). With this model,security parameters are configured at both the agent level and the manager level. Messages exchanged between the agent and the manager are subject to a data integrity check and data origin authentication. Up to 8 user profiles are supported for setting SNMPv3 USM parameters.

This resource type was added in iLO 5 1.20

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice/snmpusers/{item}`	GET PATCH DELETE

AuthPassphrase


Description	Sets the passphrase to use for sign operations. Enter a value of 8 to 49 characters.
Type	string or null
Read Only	False
Added	iLO 5 1.20

AuthProtocol


Description	Sets the message digest algorithm to use for encoding the authorization passphrase. The message digest is calculated over an appropriate portion of an SNMP message, and is included as part of the message sent to the recipient.
Type	string
Read Only	False
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`MD5`	Indicate Message Digest Algorithm.
`SHA`	Indicate Secure Hash Algorithm.
`SHA256`	Indicate SHA256 Algorithm.

PrivacyPassphrase


Description	Sets the passphrase to use for encrypt operations. Enter a value of 8 to 49 characters.
Type	string or null
Read Only	False
Added	iLO 5 1.20

PrivacyProtocol


Description	Sets the encryption algorithm to use for encoding the privacy passphrase. A portion of an SNMP message is encrypted before transmission.
Type	string
Read Only	False
Added	iLO 5 1.20

The following are the supported values:

Value	Description
`AES`	Indicate Advanced Encryption Standard Algorithm.

SecurityName


Description	The user profile name. Enter an alphanumeric string of 1 to 32 characters.
Type	string or null
Read Only	False
Added	iLO 5 1.20

UserEngineID


Description	The UserEngineID is combined with the SecurityName to create a SNMPv3 user for each manager. It is only used for creating remote accounts used with INFORM messages. If this property is not set then INFORM message will be sent with default or iLO configured engine ID. This value must be a hexadecimal string with an even number of 10 to 64 characters, excluding the first two characters, 0x (for example, 0x01020304abcdef).
Type	string or null
Read Only	False
Added	iLO 5 1.20

HpeSNMPUsersCollection

@odata.type: "#HpeSNMPUsersCollection.HpeSNMPUsersCollection"

A Collection of HpeSNMPUsers resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice/snmpusers`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSNMPUser

Members (array)

Member of HpeSNMPUsersCollection.HpeSNMPUsersCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSNMPUsersCollection.HpeSNMPUsersCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeSNMPUsersCollection.HpeSNMPUsersCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeTlsConfig

@odata.type: "#HpeTlsConfig.v1_0_0.HpeTlsConfig"

The schema definition for TLS configuration.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/bios/oem/hpe/tlsconfig`	GET
`/redfish/v1/systems/{item}/bios/oem/hpe/tlsconfig/settings`	GET PATCH

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeTlsConfig
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeTlsConfig.v1_0_0.HpeTlsConfig See the Redfish standard schema and specification for information on common @Redfish properties.

Certificates (array)

Certificates is an array containing elements of:

Certificates[{item}].FingerPrint Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The fingerprint of the certificate. It is the sha256 (SHA2) of the Der format of the certificate
Type	string
Read Only	True

Certificates[{item}].Issuer Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The Issuer of the certificate
Type	string
Read Only	True

Certificates[{item}].SerialNumber Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The Serial Number of the certificate.
Type	string
Read Only	True

Certificates[{item}].Subject Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The Subject of the certificate.
Type	string
Read Only	True

Certificates[{item}].ValidNotAfter Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The expiration date of the certificate.
Type	string
Read Only	True

Certificates[{item}].ValidNotBefore Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The date when the certificate becomes valid.
Type	string
Read Only	True

Ciphers


Description	The encryption used. It can have more than one type of encryption, example: "AES128-SHA:AES256-SHA:AES128-SHA256:AES256-SHA256"
Type	string
Read Only	False

DeleteCertificates (array)

DeleteCertificates is an array containing elements of:

DeleteCertificates[{item}].FingerPrint Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	To delete a certificate, the user should place its fingerprint here. The fingerprint would be found as a property under the single certificate object in the "Certificates" array
Type	string
Read Only	False

HostnameCheck


Description	Use this option to enable or disable verification of the connected server's hostname with the hostname in the certificate supplied by the server
Type	string
Read Only	False

The following are the supported values:

Value	Description
`Disabled`	Disable verification of the connected server's hostname.
`Enabled`	enable verification of the connected server's hostname.

NewCertificates (array)

NewCertificates is an array containing elements of:

NewCertificates[{item}].X509Certificate Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	the body (PEM format) of the Certificate to be added
Type	string
Read Only	False

ProtocolVersion


Type	string
Read Only	True

The following are the supported values:

Value
`AUTO`
`1.0`
`1.1`
`1.2`
`1.3`

TlsCaCertificateCount


Description	The certificates count.
Type	integer
Read Only	False

VerifyMode


Description	It determines if/how the certificates are validated.
Type	string
Read Only	False

The following are the supported values:

Value
`NONE`
`PEER`

HpeUSBDevice

@odata.type: "#HpeUSBDevice.v2_0_0.HpeUSBDevice"

The HpeUSBDevice resource describes the properties of USB devices.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/usbdevices/{item}`	GET

DeviceCapacityMB


Description	USB device usable capacity (if applicable) in Mbytes
Type	integer
Read Only	True
Added	iLO 5 1.10

DeviceClass


Description	USB device Class code as defined by the USB HID device specification.
Type	integer
Read Only	True
Added	iLO 5 1.10

DeviceName


Description	USB device name in UTF-8 format.
Type	string or null
Read Only	True
Added	iLO 5 1.10

DeviceProtocol


Description	Protocol code as defined by the USB HID specification.
Type	integer
Read Only	True
Added	iLO 5 1.10

DeviceSubClass


Description	USB device SubClass code as defined by the USB HID device specification.
Type	integer
Read Only	True
Added	iLO 5 1.10

Location


Description	Location of the USB device on the server
Type	string or null
Read Only	True
Added	iLO 5 1.10

ProductID


Description	USB product ID as defined by manufacturer.
Type	integer
Read Only	True
Added	iLO 5 1.10

StructuredName


Description	USB device structured name in UTF-8 format.
Type	string or null
Read Only	True
Added	iLO 5 1.10

UEFIDevicePath


Description	UEFI device path of USB device. Standardized text representation of the UEFI device path, in UTF-8 format
Type	string or null
Read Only	True
Added	iLO 5 1.10

VendorID


Description	Vendor ID of detected USB device.
Type	integer
Read Only	True
Added	iLO 5 1.10

HpeUSBDevicesCollection

@odata.type: "#HpeUSBDevicesCollection.HpeUSBDevicesCollection"

A Collection of HpeUSBDevices resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/usbdevices`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeUSBDevice

Members (array)

Member of HpeUSBDevicesCollection.HpeUSBDevicesCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeUSBDevicesCollection.HpeUSBDevicesCollection


Type	string
Read Only	True
Format	uri-reference

Members@odata.count

Member of HpeUSBDevicesCollection.HpeUSBDevicesCollection


Description	The total number of collection members.
Type	integer
Read Only	True

HpeUSBPort

@odata.type: "#HpeUSBPort.v2_0_0.HpeUSBPort"

The HpeUSBPort resource describes the properties of USB ports.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/usbports/{item}`	GET

InstanceNumber


Description	Instance number of the USB Port
Type	integer
Read Only	True
Added	iLO 5 1.10

Location


Description	Location of the USB Device on the server
Type	string or null
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Back`	Located on the rear panel of the server.
`Front`	Located on the front bezel of the server.
`Internal`	Located internally within the server chassis.
`InternalManagement`	Internal management media.
`InternalSDCard`	The internal SD-Card slot.
`iLOManagement`	iLO virtual USB devices.

PCIBusNumber


Description	PCI Bus number of the USB controller that controls this USB port
Type	integer
Read Only	True
Added	iLO 5 1.10

PCIDeviceNumber


Description	PCI Device Number of the USB Controller that controls this USB Port.
Type	integer
Read Only	True
Added	iLO 5 1.10

PCIFunctionNumber


Description	PCI Function Number of the USB Controller that controls this USB Port.
Type	integer
Read Only	True
Added	iLO 5 1.10

ParentHubInstance


Description	Parent Hub Instance that provides an instance number of the internal hub this USB Port is connected to.
Type	integer
Read Only	True
Added	iLO 5 1.10

SharedCapability


Description	Shared Capability of the USB Port
Type	string or null
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`UnsharedManagement`	Not shared as a Management Port.
`SharedManagementPhysicalSwitch`	Shared management port w/ physical switch to control whether muxed to iLO or host.
`SharedManagementPortAutomaticControl`

SpeedCapability


Description	USB speed capability of the USB port as configured by the BIOS during POST.
Type	string or null
Read Only	True
Added	iLO 5 1.10

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`USB1FullSpeed`	USB 1.0 Full Speed
`USB2HighSpeed`	USB 2.0 High Speed
`USB3SuperSpeed`	USB 3.x SuperSpeed

UEFIDevicePath