For each data type provided by the HPE ilO Redfish service, find below its description including the list of possible instances (URIs), links to related other resources, described properties and many other details.
Refer to the data types and collection section for more information on Redfish data types and collections.
Bios
@odata.type: "#Bios.v1_0_5.Bios"
The Bios schema contains properties related to the BIOS Attribute Registry. The Attribute Registry describes the system-specific BIOS attributes and Actions for changing to BIOS settings. Changes to the BIOS typically require a system reset before they take effect. It is likely that a client will find the @Redfish.Settings term in this resource, and if it is found, the client makes requests to change BIOS settings by modifying the resource identified by the @Redfish.Settings term.
The Resource ID of the Attribute Registry that has the system-specific information about a BIOS resource.
Type
string or null
Read Only
True
Added
iLO6 1.05
Attributes
AMDPerformanceWorkloadProfile (AMD Performance Workload Profile)
Member of Bios.v1_0_5.Bios
Description
Provide feature sets for specific performance requirement.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
CPUIntensive
CPU Intensive
JavaThroughput
Java Throughput
JavaLatency
Java Latency
PowerEfficiency
Power Efficiency
MemoryThroughputIntensive
Memory Throughput Intensive
StorageIOIntensive
Storage IO Intensive
NICThroughputIntensive
NIC Throughput Intensive
NICLatencySensitive
NIC Latency Sensitive
VMwareVSphereOptimized
VMware vSphere Optimized
LinuxKVMOptimized
Linux KVM Optimized
ContainerOptimized
Container Optimized
RDBMSOptimized
RDBMS Optimized
BigDataAnalyticsOptimized
Big Data Analytics Optimized
IOTGateway
IOT Gateway
HPCOptimized
HPC Optimized
OpenStackNFV
OpenStack NFV
OpenStackForRealTimeKernel
OpenStack for RealTime Kernel
AccessControlService (Access Control Service)
Member of Bios.v1_0_5.Bios
Description
If enabled, Access Control Service is enabled for the downstream port.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AcpiHpet (High Precision Event Timer (HPET) ACPI Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to disable the High Precision Event Timer (HPET) table and device object in ACPI. When disabled, the HPET is not available to an operating system that supports the HPET through the industry standard ACPI name space.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AcpiRootBridgePxm (Memory Proximity Reporting for I/O)
Member of Bios.v1_0_5.Bios
Description
When enabled, the System BIOS reports the proximity relationship between I/O devices and system memory to the operating system. Most operating systems can use this information to efficiently assign memory resources for devices, such as network controllers and storage devices. Additionally, certain I/O devices might not be able to take advantage of I/O handling benefits if their OS drivers are not properly optimized to support this feature. See your operating system and I/O device documentation for more details.
The ACPI SLIT (System Locality Information Table) defines the relative access times between processors, memory subsystems, and I/O subsystems. Operating systems that support the SLIT can use this information to improve performance by allocating resources and workloads more efficiently.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AdminEmail (Administrator E-mail Address)
Member of Bios.v1_0_5.Bios
AdminOtherInfo (Administrator Other Information)
Member of Bios.v1_0_5.Bios
Description
Enter the server administrator's information text.
Type
String
Read Only
False
AdminPhone (Administrator Phone Number)
Member of Bios.v1_0_5.Bios
Description
Enter the server administrator's phone number text.
Type
String
Read Only
False
AdvCrashDumpMode (Advanced Crash Dump Mode)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable the Advanced Crash Dump Mode. When enabled, the system will be configured to log additional debug information to the Active Health System logs when an unexpected system crash is experienced. This option should only be enabled when directed by qualified service personnel
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
Enabled
Enabled
AllowLoginWithIlo (Allow login with %s accounts)
Member of Bios.v1_0_5.Bios
Description
Allows users to login with an iLO account with the CONFIGURE_BIOS privilege.
Support 5-Level Page to extend the size of virtual addresses from 48 bits to 57 bits, increasing the addressable virtual memory up to 128 PB.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AmdCdma (AMD Cacheable Direct Memory Access)
Member of Bios.v1_0_5.Bios
Description
Enable or disable AMD CDMA (Cacheable Direct Memory Access), which allows PCIe I/O devices to write directly to cache bypassing DRAM. This may improve performance for some PCIe devices with TLP Processing Hint capability.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
Enabled
Enabled
AmdCstC2Latency (ACPI CST C2 Latency)
Member of Bios.v1_0_5.Bios
Description
Select 800us for Linux kernel prior to version 6.0, 18us for version 6.0 or later
This configures the DMA Remapping setting. DMA Remapping protects against memory corruption and malicious DMA attacks.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AmdL1Prefetcher (L1 Stream HW Prefetcher)
Member of Bios.v1_0_5.Bios
Description
Use this option to disable L1 Stream HW prefetch feature. In some cases, setting this option to disabled can improve performance. Typically, setting this option to enabled provides better performance. Only disable this option after performing application benchmarking to verify improved performance in the environment.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AmdL2Prefetcher (L2 Stream HW Prefetcher)
Member of Bios.v1_0_5.Bios
Description
Use this option to disable L2 Stream HW prefetch feature. In some cases, setting this option to disabled can improve performance. Typically, setting this option to enabled provides better performance. Only disable this option after performing application benchmarking to verify improved performance in the environment.
AmdMemoryBurstRefresh (DRAM Burst Refresh Mode)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable DRAM Burst/Postponed Refresh mode
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AmdPeriodicDirectoryRinse (AMD Periodic Directory Rinse)
Member of Bios.v1_0_5.Bios
Description
Enable Periodic Directory Rinse which may help manage directory capacity more efficiently. In workloads with significant system-wide sharing, like databases and HPC applications, using a shorter period for a directory rinse operation may improve performance.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
Enabled
Enabled
AmdSecureMemoryEncryption (AMD Secure Memory Encryption)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable SME
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AmdSecureNestedPaging (AMD Secure Nested Paging)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable AMD SEV-SNP. When enabled, SEV-SNP adds strong memory integrity protection to help prevent malicious hypervisor-based attacks like data replay, memory re-mapping, and more in order to create an isolated execution environment.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AmdVirtualDrtmDevice (AMD Virtual DRTM Device)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable the AMD Virtual DRTM Device.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
AmdXGMILinkSpeed (AMD xGMI Link Speed)
Member of Bios.v1_0_5.Bios
Description
Configure xGMI link speed between two processors, Auto will use the platform defined setting. Other options will force the speed to user selected.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
AmdXGMILinkSpeed16
16 Gbps
AmdXGMILinkSpeed18
18 Gbps
AmdXGMILinkSpeed25
25 Gbps
AmdXGMILinkSpeed32
32 Gbps
ApplicationPowerBoost (Infinity Fabric Power Management)
Member of Bios.v1_0_5.Bios
Description
When this feature is enabled, the EPYC processor will dynamically vary the clock frequency of the Infinity Fabric based on activity level. For NUMA optimized workloads, allowing the Infinity Fabric to run slower can lead to increased overall performance due to an increase in CPU boost. Disabling this feature may be necessary for latency sensitive workloads.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
Enabled
Enabled
AssetTagProtection (Asset Tag Protection)
Member of Bios.v1_0_5.Bios
Description
Use this option to lock Asset Tag information. When set to lock, the Asset Tag is not erased if the default system settings are restored.
Use this option to configure the server power state when AC power is applied to the system. Restore Last Power State returns the system to its previous power state when AC power is restored after an AC power loss. Note: This option is not available on all systems. Always Power On and Always Power Off causes the system to always return to the "on" and "off" state, respectively, whenever power is applied, even if the system is in the "off" state when power is lost.
Use this option to configure how the system attempts to boot devices per the Boot Order list when no bootable device is found. If configured to 'Retry Boot Order Indefinitely,' the system continuously attempts to process the Boot Order list until a bootable device is found. If configured to 'Attempt Boot Order Once,' the system attempts to process all items in the Boot Order list once, and if unsuccessful, waits for user input to proceed. If configured for 'Reset After Failed Boot Attempt,' the system attempts to process all items in the Boot Order list once, and then reboots the system.
Type
Enumeration
Read Only
False
Value
Description
RetryIndefinitely
Retry Boot Order Indefinitely
AttemptOnce
Attempt Boot Order Once
ResetAfterFailed
Reset After Failed Boot Attempt
CollabPowerControl (Collaborative Power Control)
Member of Bios.v1_0_5.Bios
Description
For operating systems that support the Processor Clocking Control (PCC) Interface, enabling this option enables the Operating System to request processor frequency changes. For Operating Systems that do not support the PCC Interface this option has no effect on system operation.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
Enabled
Enabled
ConsistentDevNaming (Consistent Device Naming)
Member of Bios.v1_0_5.Bios
Description
Use this option to select the level of Consistent Device Naming. On supported operating systems, NIC ports are named based on their location in the system. CDN Support for LOMs Only names Embedded NICs and FlexibleLOMs. Existing NIC connections retain their names until reinstalled under the OS environment.
Type
Enumeration
Read Only
False
Value
Description
LomsAndSlots
CDN Support for LOMs and Slots
LomsOnly
CDN Support for LOMs Only
Disabled
Disabled
CustomPostMessage (Custom POST Message)
Member of Bios.v1_0_5.Bios
Description
Enter a message to be displayed on POST screen during system startup. This feature limits POST screen messaging to 62 characters, special characters are also accepted.
Use this option to configure Pstate0 Frequency. Auto uses the processor fused values.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Manual
Manual
DataFabricCStateEnable (Data Fabric C-State Enable)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable Data Fabric C-States
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
ForceEnabled
Force Enabled
Disabled
Disabled
DaylightSavingsTime (Daylight Savings Time)
Member of Bios.v1_0_5.Bios
Description
This option controls the Daylight Savings Time (DST) adjustment to the displayed local time. If this option is disabled, the displayed local time will not be adjusted for DST. If this option is enabled, the displayed local time will be advanced by one hour. if this option is set to BMC control, the BMC will determine whether DST should be applied for the current time zone.
Type
Enumeration
Read Only
False
Value
Description
DaylightSavingsTimeDisabled
Daylight Savings Time is disabled
DaylightSavingsTimeEnabled
Daylight Savings Time is enabled
DeterminismControl (Determinism Control)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure AMD determinism control. Auto uses the processor fused values.
When enabled, this option enables obtaining the pre-boot network IPv4 configuration from a DHCP server. Individual settings are not available. When disabled, you must configure static IP address settings individually.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
DramControllerPowerDown (DRAM Controller Power Down)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable DRAM Controller power down
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
DynamicPowerCapping (Dynamic Power Capping Functionality)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure when the System BIOS executes power calibration during the boot process. In Auto mode, calibration is run the first time the server is booted, and is then only run again when the server's hardware configuration changes, configuration settings change, or if the system determines a new calibration is necessary. When disabled, the calibration does not run, and Dynamic Power Capping is not supported. When enabled, the calibration is run on every boot.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Enabled
Enabled
Disabled
Disabled
EmbSata1Aspm (SATA Power Management(SALP))
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable Aggressive Link Power Management(SALP).
Select this option to enable or disable SATA devices.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
EmbSata4PCIeOptionROM (PCIe Option ROM)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
EmbVideoConnection (Embedded Video Connection)
Member of Bios.v1_0_5.Bios
Description
When configured for Auto mode, the external video connection to the embedded video controller is automatically disabled to save power when a monitor is not attached. It is automatically enabled when a monitor is attached, including when the server is operating. When configured for Always Disabled, the external video connection to the embedded video controller is disabled, and a monitor connected to this port does not display except during system boot. This can be used for security reasons. When configured for Always Enabled, the external video connection to the embedded video controller is always enabled. This option is only required if a monitor is attached with a monitor detection that does not function properly (making AUTO mode not work properly). Note: This option does not affect Integrated Remote Console video. Also, if you press F9 or F11 during system boot, the configured video connector behavior is overridden, and the video console remains enabled. This lets you reconfigure the Embedded Video Connection option even if the video is disabled.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
AlwaysDisabled
Always Disabled
AlwaysEnabled
Always Enabled
EmbeddedDiagnostics (Embedded Diagnostics)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable Embedded Diagnostics functionality. If disabled, you cannot launch Embedded Diagnostics. Enable this option to use the Embedded Diagnostics functionality.
Use this option to enable or disable the Embedded iPXE. When enabled, you can launch the Embedded iPXE from the pre-boot environment. When enabled, you can add the Embedded iPXE can to the UEFI Boot Order by selecting the option entitled 'Add Embedded iPXE to Boot Order'. When disabled, the Embedded iPXE is not available in the pre-boot environment, and you cannot add it to the UEFI boot order. The Embedded iPXE is an open source network boot application embedded in system BIOS that you can use to perform network boot.This option also enables the UEFI shell command 'ipxe' and an entry in Embedded Application list, both can be used to launch the Embedded iPXE.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
EmbeddedSerialPort (Embedded Serial Port)
Member of Bios.v1_0_5.Bios
Description
Select this option to assign the logical COM port address and associated default resources to the selected physical serial port. The operating system can overwrite this setting.Note: Embedded Serial Port and Virtual Seral Port (VSP) cannot be set to the same port. If Embedded Serial Port is changed to the same port as VSP, the VSP will automatically be reassigned.
Type
Enumeration
Read Only
False
Value
Description
Com1Irq4
COM 1; IRQ4; I/O: 3F8h-3FFh
Com2Irq3
COM 2; IRQ3; I/O: 2F8h-2FFh
Disabled
Disabled
EmbeddedUefiShell (Embedded UEFI Shell)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable the Embedded UEFI Shell. If enabled, you can launch the Embedded UEFI Shell from the pre-boot environment. When enabled, you can add the Embedded UEFI Shell to the UEFI Boot Order by selecting the option entitled 'Add Embedded UEFI Shell to Boot Order'. When disabled, the Embedded UEFI Shell is not available in the pre-boot environment, and you cannot add it to the UEFI boot order. The Embedded UEFI Shell is a pre-boot command line environment that you can use for scripting and running UEFI applications. It provides CLI-based commands to configure the server, update the System BIOS and other firmware, and obtain system information and error logs.
Use this option to configure the ACPI serial port settings, which include the ability to redirect the Windows Server Emergency Management console (EMS) through either the physical or virtual serial port.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
Physical
Physical Serial Port
Virtual
Virtual Serial Port
EnabledCoresPerProc (Enabled Cores per Processor)
Member of Bios.v1_0_5.Bios
Description
This option enables limiting the number of enabled processor cores per physical processor. You can set the number of enabled cores to a value supported by the physical processor. Setting the value to 0 or a value larger than the number of supported cores of the installed processor will result in all processor cores in the socket being enabled.
Type
Enumeration
Read Only
False
Value
Description
CoresPerProc0
0
CoresPerProc2
2
CoresPerProc4
4
CoresPerProc6
6
CoresPerProc8
8
CoresPerProc12
12
CoresPerProc16
16
CoresPerProc20
20
CoresPerProc24
24
CoresPerProc28
28
CoresPerProc32
32
CoresPerProc36
36
CoresPerProc40
40
CoresPerProc48
48
CoresPerProc56
56
CoresPerProc60
60
CoresPerProc64
64
CoresPerProc72
72
CoresPerProc80
80
CoresPerProc84
84
CoresPerProc96
96
CoresPerProc112
112
EraseUserDefaults (Erase User Defaults)
Member of Bios.v1_0_5.Bios
Description
Select this option to erase the user defaults backup.
Type
Enumeration
Read Only
False
Value
Description
No
No, Cancel
Yes
Yes, erase the current settings.
ExtendedAmbientTemp (Extended Ambient Temperature Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable the server to operate at higher ambient temperatures than normally supported. These options are only supported with specific hardware configurations. See your server documentation before configuring the server to enable extended ambient temperature support. Improper system operation or damage to hardware components can result from enabling these options in unsupported configurations. Selecting Enabled for 40c Ambient (ASHRAE 3) enables the server to operate in environments with ambient temperatures up to 40 degrees Celsius. Selecting Enabled for 45c Ambient (ASHRAE 4) enables the server to operate in environments with ambient temperatures up to 45 degrees Celsius. Not all servers support both 40c Ambient (ASHRAE 3) and 45c Ambient (ASHRAE 4).
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
ASHRAE3
Enabled for 40c Ambient (ASHRAE 3)
ASHRAE4
Enabled for 45c Ambient (ASHRAE 4)
ExtendedMemTest (Extended Memory Test)
Member of Bios.v1_0_5.Bios
Description
When enabled, the system validates memory during the memory initialization process. If uncorrectable memory errors are detected, the memory is mapped out, and the failed DIMMs are logged to the Integrated Management Log (IML). Enabling this option can result in a significant increase in the server boot time.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
F11BootMenu (One-Time Boot Menu (F11 Prompt))
Member of Bios.v1_0_5.Bios
Description
Use this option to disable the POST One-Time Boot F11 Prompt. Note: When disabled, shell 'boot' command is not available for use.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
FCScanPolicy (Fibre Channel/FCoE Scan Policy)
Member of Bios.v1_0_5.Bios
Description
Use this option to change the default Fibre Channel or FCoE policy for scanning for boot targets. When configured for Scan All Targets, each installed FC/FCoE adapter scans all available targets. When configured for Scan Configured Targets Only, the FC/FCoE adapters only scan targets that are preconfigured in the devices settings. This option overrides any individual device settings configured in the device-specific setup.This option is only supported in UEFI Mode.
Use this option to configure how the server reacts when fans fail, resulting in the server not having required fans in operation. When configured for "Shutdown/Halt on Critical Fan Failures," the server cannot boot or operate when it does not have required fans operating due to one or more fan failures. When configured for "Allow Operation with Critical Fan Failures," the server can boot and operate if it does not have required fans operating due to one or more fan failures. It is recommended that you configure the Fan Failure Policy to the default state of "Shutdown/Halt on Critical Fan Failures." Operating without the required fans operating can result in damage to hardware components.
Type
Enumeration
Read Only
False
Value
Description
Shutdown
Shutdown/Halt on Critical Fan Failures
Allow
Allow Operation with Critical Fan Failures
FanInstallReq (Fan Installation Requirements)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure how the server reacts when all required fans are not installed. When configured for Enable Messaging, the server displays messages and log events to the Integrated Management Log (IML) when required fans are not installed. The server can still boot and operate. When configured for Disable Messaging, the server does not display messages and log events when required fans are not installed. All indications that the server is operating without required fans are removed. It is recommended that you leave Fan Installation Requirements in the default state of Enable Messaging. Operating without the required fans can result in damage to hardware components.
Use this option to control the UEFI HTTP(s) boot support when in UEFI Mode, and the 'Discover Shell Auto-Start Script using DHCP' option under 'Embedded UEFI Shell' settings. When 'Auto' is selected, the system automatically adds HTTP(S) boot options to the UEFI Boot Order list for every network port that is enabled for Network Boot. Selecting this option enables the system to boot to the HTTP or HTTPS URLs provided by the DHCP server. Any other URLs provided by the DHCP server are ignored. When 'HTTP only' is selected, the system automatically adds HTTP boot options to the UEFI Boot Order list for every network port that is enabled for Network Boot. Selecting this option enables the system to boot to the HTTP URLs provided by the DHCP server, and to ignore any HTTPS or other URLs that are provided. When 'HTTPS only' is selected, the system automatically adds HTTPS boot options to the UEFI Boot Order list for every network port that is enabled for Network Boot. Selecting this option enables the system to boot to the HTTPS URLs provided by the DHCP server, and to ignore any HTTP or other URLs that are provided. To enable HTTPS boot either by selecting 'Auto' or 'HTTPS only', you must enroll the respective TLS certificate of the HTTPS server under Server Security > TLS(HTTPS) Options. Note: This setting only affects the HTTP boot options added for the network ports, and the Discover Shell Auto-Start Script provided by the DHCP server. Other settings, such as Boot from URL, are not affected by this setting.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
HttpsOnly
HTTPS only
HttpOnly
HTTP only
Disabled
Disabled
InfinityFabricPstate (Infinity Fabric Performance State)
Member of Bios.v1_0_5.Bios
Description
This feature allows for customizing the performance state (P-state) of the Infinity Fabric when Infinity Fabric Power Management is disabled. The default is Auto when Infinity Fabric Power Management is Enabled. P0 is ideal for latency sensitive or I/O centric workloads, P3 is ideal for achieving best core boost frequencies.
Type
Enumeration
Read Only
False
Value
Description
P0
P0
P1
P1
P2
P2
P3
P3
Auto
Auto
IntelligentProvisioning (Intelligent Provisioning (F10 Prompt))
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable the Intelligent Provisioning functionality. When disabled, you are prevented from entering the Intelligent Provisioning environment by pressing F10 during server boot. You must set this option to enabled to use Intelligent Provisioning functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
IpmiWatchdogTimerAction (IPMI Watchdog Timer Action)
Member of Bios.v1_0_5.Bios
Description
Use this option to set the timeout action upon expiration of the watchdog timer due to a server lockup.
Type
Enumeration
Read Only
False
Value
Description
PowerCycle
Power Cycle
PowerDown
Power Down
WarmBoot
Warm Boot
IpmiWatchdogTimerStatus (IPMI Watchdog Timer)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable a Boot Time (POST) IPMI compliant Watchdog Timer (WDT) that is disabled when an IPMI command is issued to the system by the user and will not automatically be disabled. The WDT will be stopped when F9 or F10 hotkey is pressed during POST.
Type
Enumeration
Read Only
False
Value
Description
IpmiWatchdogTimerOff
Disabled
IpmiWatchdogTimerOn
Enabled
IpmiWatchdogTimerTimeout (IPMI Watchdog Timer Timeout)
Member of Bios.v1_0_5.Bios
Description
Use this option to set the wait timer before performing the desired timeout action on the server in the event of a server lockup.
Use this option to specify the pre-boot network IPv4 address. Enter a static IP address using dotted-decimal notation (for example, 127.0.0.1). If DHCP is used (the DHCPv4 option is enabled), this setting is unavailable because the value is supplied automatically.
Use this option to specify the pre-boot network gateway IPv4 address. Enter a static IP address using dotted-decimal notation (for example, 127.0.0.1). If DHCP is used (the DHCPv4 option is enabled), this setting is unavailable because the value is supplied automatically.
Use this option to specify the pre-boot network Primary DNS Server IPv4 address. Enter a static IP address using dotted-decimal notation (for example, 127.0.0.1). If DHCP is used (the DHCPv4 option is enabled), this setting is unavailable because the value is supplied automatically.
Use this option to specify the pre-boot network subnet mask. Enter a static IP address using dotted-decimal notation (for example, 255.255.255.0). If DHCP is used (the DHCPv4 option is enabled), this setting is unavailable because the value is supplied automatically.
Use this option to specify the pre-boot network IPv6 address. Enter a static IP address in the standard colon seperated format (for example, 1234::1000). If IPv6 Config Policy is set to Automatic, this setting is unavailable because the value is supplied automatically.
Type
String
Read Only
False
Ipv6ConfigPolicy (IPv6 Config Policy)
Member of Bios.v1_0_5.Bios
Description
When set to Automatic, this option enables obtaining the pre-boot network IPv6 configuration automatically. Individual settings are not available. When set to Manual, you must configure static IP address settings individually.
Type
Enumeration
Read Only
False
Value
Description
Automatic
Automatic
Manual
Manual
Ipv6Duid (IPv6 DHCP Unique Identifier)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the IPv6 DHCP Unique Identifier (DUID). If configured for Auto, the DUID is set using the Universal Unique Identifier (UUID) of the server, or using the DUID-LLT method if the server UUID is not available. If configured for DUID-LLT, the DUID is set based on the Link-layer Address Plus Time [DUID-LLT] method.
Use this option to specify the pre-boot network gateway IPv6 address. Enter a static IP address in the standard colon seperated format (for example, 1234::1000). If IPv6 Config Policy is set to Automatic, this setting is unavailable because the value is supplied automatically.
Use this option to specify the pre-boot network Primary DNS Server IPv6 address. Enter a static IP address in the standard colon seperated format (for example, 1234::1000). If IPv6 Config Policy is set to Automatic, this setting is unavailable because the value is supplied automatically.
Type
String
Read Only
False
IpxeAutoStartScriptLocation (iPXE Auto-Start Script Location)
Member of Bios.v1_0_5.Bios
Description
Use this option to select the location of the Embedded iPXE startup script. For the 'File Systems on Attached Media' option, you must name the script file "startup.ipxe" and place it on a UEFI accessible local file system, such as a FAT32 partition on a USB disk or HDD. For the 'Network Location' option, the file must end with a .ipxe extension, and must be placed at an HTTP/HTTPS location accessible to the system. When you select the 'Auto' option, the system attempts to retrieve the startup script from the network location first, followed by locally attached media.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
AttachedMedia
File Systems on Attached Media
NetworkLocation
Network Location
IpxeBootOrder (Add Embedded iPXE to Boot Order)
Member of Bios.v1_0_5.Bios
Description
When enabled, this option adds the Embedded iPXE as an entry in the UEFI Boot Order list. This option is only available when the Embedded iPXE is enabled.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
IpxeScriptAutoStart (iPXE Script Auto-Start)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable execution of the user supplied startup script for the Embedded iPXE. when enabled, you can configure Embedded iPXE to execute the startup script from a local media or a network location. When disable, Embedded iPXE will perform an auto discovery of startup script. You must name the script file "startup.ipxe"
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
IpxeScriptVerification (iPXE Script Verification)
Member of Bios.v1_0_5.Bios
Description
Enable this option to allow verification of iPXE script files when Secure Boot is enabled. For successful execution of script, make sure that iPXE scripts are enrolled in the Secure Boot database (db).
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
IpxeStartupUrl (Network Location for iPXE Auto-Start Script)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure a network URL to a iPXE startup script. This option is available and used only when the Auto-Start Script Location is set to 'Network Location', or 'Auto', and the iPXE Auto-Start Script discovery.URLs in HTTP/HTTPS are accepted using either an IPv4 or IPv6 server address. For example, the URLs can be in any of the following formats: http://192.168.0.1/file/file.ipxe, http://example.com/file/file.ipxe, https://example.com/file/file.ipxe, http://[1234::1000]/file.ipxe. The file must end with an .ipxe extension. When configured, the Embedded iPXE attempts to load and execute the startup script from the network location pointed to by this URL. When an HTTPS URL is configured, you must enroll the respective HTTPS server's TLS certificate under Server Security > TLS(HTTPS) Options.
Type
String
Read Only
False
LastLevelCacheAsNUMANode (Last-Level Cache (LLC) As NUMA Node)
Member of Bios.v1_0_5.Bios
Description
When enabled, LLC As NUMA Node divides the processor's cores into an additional NUMA domain based on the L3 cache. Enabling this feature can increase performance for workloads that are NUMA aware and optimized.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
Enabled
Enabled
MaxMemBusFreqMHz (Maximum Memory Bus Frequency)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the memory system to run memory at a lower maximum speed than that supported by the installed processor and DIMM configuration. Setting this option to Auto configures the system to run memory at the maximum speed supported.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
MaxMemBusFreq4800
4800 MHz
MaxMemBusFreq4400
4400 MHz
MaxMemBusFreq4000
4000 MHz
MaxMemBusFreq3600
3600 MHz
MaxMemBusFreq3200
3200 MHz
MaxPcieSpeed (Maximum PCI Express Speed)
Member of Bios.v1_0_5.Bios
Description
If a PCI Express device does not run properly at its optimal speed, lowering the speed at which the device is running can address this issue. This option enables you to lower the maximum PCI Express speed at which the server allows PCI Express devices to operate. You can also use it to address issues with problematic PCI Express devices. Setting this value to Maximum Supported configures the platform to run at the maximum speed supported by the platform or the PCIe device, whichever is lower.
Type
Enumeration
Read Only
False
Value
Description
PerPortCtrl
Per Port Control
PcieGen1
PCIe Generation 1.0
PcieGen2
PCIe Generation 2.0
PcieGen3
PCIe Generation 3.0
PcieGen4
PCIe Generation 4.0
MemPatrolScrubbing (Memory Patrol Scrubbing)
Member of Bios.v1_0_5.Bios
Description
This option corrects memory soft errors so that, over the length of the system runtime, the risk of producing multi-bit and uncorrectable errors is reduced.
This option controls the refresh rate of the memory controller and might affect the performance and resiliency of the server memory. It is recommended that you leave this setting in the default state unless indicated in other documentation for this server.
Type
Enumeration
Read Only
False
Value
Description
Refreshx1
1x Refresh
Refreshx2
2x Refresh
MicrosoftSecuredCoreSupport (Microsoft(R) Secured-core Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the server for Microsoft(R) Secured-core Support. When enabled, various virtualization and security settings will be automatically enabled. Please consult operating system documentation for more details.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
MinProcIdlePower (Minimum Processor Idle Power Core C-State)
Member of Bios.v1_0_5.Bios
Description
You can only configure this option if Workload Profile is set to Custom. Use this option to select the lowest idle power state (C-state) of the processor that the operating system uses. The higher the C-state, the lower the power usage of that idle state. (C6 is the lowest power idle state supported by the processor).
This configures the minimum address space identifier (ASID) that can be used for AMD Secure Encrypted Virtualization (SEV) enabled guests. ASID below this number are only available to SEV enable guest that also enable SEV-ES (Encrypted State)
Type
Integer
Read Only
False
MixedPowerSupplyReporting (Mixed Power Supply Reporting)
Member of Bios.v1_0_5.Bios
Description
When enabled, the server logs a message that a mixed power supply configuration is present. When disabled, the server no longer logs messages that a mixed power supply configuration is present.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
NetworkBootRetry (Network Boot Retry Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the Network Boot Retry Support. When enabled, the system BIOS attempts to boot the network device up to the number of times configured in the Network Boot Retry Count option before attempting to boot the next network device. This setting only takes effect when attempting to boot a network device from the F12 function key and one-time boot options.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
NetworkBootRetryCount (Network Boot Retry Count)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the number of times the system BIOS attempts to boot a network device. The valid range is from 0 to 20.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
NumaGroupSizeOpt (NUMA Group Size Optimization)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure how the System BIOS reports the size of a NUMA node (number of logical processors), which assists the Operating System in grouping processors for application use (referred to as Kgroups). The default setting of Clustered provides better performance due to optimizing the resulting groups along NUMA boundaries. However, some applications might not be optimized to take advantage of processors spanning multiple groups. In such cases, selecting the Flat option might be necessary in order for those applications to utilize more logical processors.
Type
Enumeration
Read Only
False
Value
Description
Flat
Flat
Clustered
Clustered
NumaMemoryDomainsPerSocket (NUMA memory domains per socket)
Member of Bios.v1_0_5.Bios
Description
Select this option to configure the number of NUMA memory domains per socket.If LLC As NUMA Node is enabled, total NUMA node number depends on total CCX number.
Type
Enumeration
Read Only
False
Value
Description
OneMemoryDomainPerSocket
One memory domain per socket
TwoMemoryDomainsPerSocket
Two memory domains per socket
FourMemoryDomainsPerSocket
Four memory domains per socket
Auto
Auto
NvmeOptionRom (Embedded NVM Express Option ROM)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable embedded NVM Express Option ROM. When enabled, the system loads the NVM Express Option ROM provided by the system BIOS. When disabled, the system loads the NVM Express Option ROM provided by the adapter.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Ocp1AuxiliaryPower (OCP Slot 1 Auxiliary Power)
Member of Bios.v1_0_5.Bios
Description
This option can be used to control if the PCIe device is granted auxiliary power. When enabled, the device is granted auxiliary power and is capable of operation however system fans may run to ensure appropriate cooling. When disabled, the device will not be able to respond to any transactions such as Wake On LAN when the server is in a auxiliary power state.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Ocp2AuxiliaryPower (OCP Slot 2 Auxiliary Power)
Member of Bios.v1_0_5.Bios
Description
This option can be used to control if the PCIe device is granted auxiliary power. When enabled, the device is granted auxiliary power and is capable of operation however system fans may run to ensure appropriate cooling. When disabled, the device will not be able to respond to any transactions such as Wake On LAN when the server is in a auxiliary power state.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
OmitBootDeviceEvent (Omit Boot Device Event)
Member of Bios.v1_0_5.Bios
Description
Use this option to record Omit Boot Device Event. If enabled, PCR Boot Attempt Measurements will be disabled and measurement in PCR[4] will not be recorded.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PackagePowerLimitControlMode (Package Power Limit Control Mode)
Member of Bios.v1_0_5.Bios
Description
This is a per processor Package Power Limit value applicable for all populated processors in the system. AUTO uses the default processor value. Modify the power limit in watts, as instructed by qualified personnel.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Manual
Manual
PackagePowerLimitValue (Package Power Limit value)
Member of Bios.v1_0_5.Bios
Description
This options control the package power limit allowed in Watts
Type
Integer
Read Only
False
PatrolScrubDuration (Patrol Scrub Duration)
Member of Bios.v1_0_5.Bios
Description
Select this option to configure the duration interval of when to run the patrol scrubber if patrol scrub is enabled.Value is in hours.
Type
Integer
Read Only
False
PciSlot10Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot10Bifurcation (PCIe Slot 10 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot10Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot11Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot11Bifurcation (PCIe Slot 11 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot11Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot12Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot12Bifurcation (PCIe Slot 12 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot12Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot13Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot13Bifurcation (PCIe Slot 13 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot13Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot14Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot14Bifurcation (PCIe Slot 14 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot14Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot15Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot15Bifurcation (PCIe Slot 15 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot15Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot16Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot16Bifurcation (PCIe Slot 16 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot16Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot17Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot17Bifurcation (PCIe Slot 17 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot17Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot18Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot18Bifurcation (PCIe Slot 18 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot18Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot19Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot19Bifurcation (PCIe Slot 19 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot19Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot1Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot1Bifurcation (PCIe Slot 1 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot20Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot20Bifurcation (PCIe Slot 20 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot20Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot21Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot21Bifurcation (PCIe Slot 21 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot21Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot22Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot22Bifurcation (PCIe Slot 22 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot22Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot23Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot23Bifurcation (PCIe Slot 23 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Type
Enumeration
Read Only
False
Value
Description
NoBifurcation
No Bifurcation
SlotBifurcated
Bifurcate
SlotDualBifurcated
Dual Bifurcate
PciSlot23Enable (PCIe Device Disable)
Member of Bios.v1_0_5.Bios
Description
Select this option to enable or disable PCI devices.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot2Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot2Bifurcation (PCIe Slot 2 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot3Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot3Bifurcation (PCIe Slot 3 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot4Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot4Bifurcation (PCIe Slot 4 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot5Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot5Bifurcation (PCIe Slot 5 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot6Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot6Bifurcation (PCIe Slot 6 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot7Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot7Bifurcation (PCIe Slot 7 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot8Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot8Bifurcation (PCIe Slot 8 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PciSlot9Aspm (PCIe Power Management(ASPM))
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the PCIe Link Power Management (ASPM) support for the selected device. When configured for L0s Enabled, the selected device's link enters a standby energy savings state. When configured for L1 Enabled, the selected device's link enters a lower power standby state at the expense of a longer exit latency. When configured for L1 and L0s Enabled, the selected device's link enters either power savings mode, depending on link utilization, and provides the highest energy savings.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Disabled
Disabled
AspmL1Enabled
L1 Enabled
PciSlot9Bifurcation (PCIe Slot 9 Bifurcation)
Member of Bios.v1_0_5.Bios
Description
Use this option to bifurcate the selected PCIe slot. When No Bifurcation is selected, the PCIe slot will train a single link at the maximum width supported by the slot and end point. When Slot Bifurcated is selected, the PCIe slot will be bifurcated into two equal width slots. When Slot Dual Bifurcate (quadfurcate) is selected, the PCIe slot will be bifurcated into four equal width slots.Note: Only change this option if the device installed in the slot supports this capability.
Use this option to configure the PCIe Link Speed for the selected device. When configured for Auto, the selected device trains at the maximum supported speed of the PCIe link. When configured for PCIe Generation 2 Link Speed, the selected device trains at a maximum of PCIe Generation 2 speed. When configured for PCIe Generation Link 1 speed, the selected device trains at a maximum of PCIe Generation 1 speed.
Use this option to enable or disable Device Option ROM
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PerformanceDeterminism (Performance Determinism)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the AMD Processor for Performance or Power Determinism.
Type
Enumeration
Read Only
False
Value
Description
PerformanceDeterministic
Performance Deterministic
PowerDeterministic
Power Deterministic
PlatformCertificate (Platform Certificate Support)
Member of Bios.v1_0_5.Bios
Description
Enable/Disable Platform Certificate Support.NOTE: This feature will only build the certificate data when a TPM 2.0 device is enabled and visible.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
PlatformRASPolicy (Platform RAS Policy)
Member of Bios.v1_0_5.Bios
Description
This option controls the platform Resiliency and Serviceability (RAS) policy. When in Firmware First mode (default), the BIOS will monitor corrected errors and log an event for any cases where the customer needs to take action on corrected errors. The OS will not monitor and log corrected errors. In OS First mode, corrected errors are unmasked to the OS and the OS will control the policy for logging corrected errors. With some operating systems, the OS will log all corrected errors. Corrected errors are an expected and natural occurrence and there is typically no action is required based on OS logging of corrected errors. Note there is no guarantee that the BIOS can properly log corrected error events when in OS First mode. It is recommended that this option is left in its default configuration. Warranty support will only be provided for memory errors that have exceeded correctable error thresholds as determined by Customer Support.
Use this option to configure POST Automatic Server Recovery (ASR).When Automatic Server Recovery is enabled, you can use this option to set the time to wait before rebooting the server in the event of a server lockup This timer is only avaiable during POST and is not enabled at operating system boot.
Use this option to set the wait timer before rebooting the server in the event of a server lockup.
Type
Enumeration
Read Only
False
Value
Description
Delay30Min
30 Minute Timer
Delay20Min
20 Minute Timer
Delay15Min
15 Minute Timer
Delay10Min
10 Minute Timer
PostBootProgress (POST Verbose Boot Progress)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable verbose boot progress messaging. Because this option displays additional debug information to the screen and serial console, it might be helpful for determining why a server became unresponsive during the boot process.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
Serial
Serial Only
All
All
PostDiscoveryMode (UEFI POST Discovery Mode)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the UEFI POST Discovery Mode. When Auto is selected, the system selectively starts devices which are required for booting the devices in the UEFI Boot Order list. Note: For some situations like system configuration change, the system will change to start all devices for discovering all boot devices. When Force Full Discovery is selected, the system starts all devices in the system providing full boot target availability. Note: When Force Full Discovery is selected, boot time might significantly increase. When Force Fast Discovery is selected, the system starts as few devices as possible to get minimal boot time. Note: When Force Fast Discovery is selected, some unsupported devices may not work properly. You may need to replace the unsupported device with one that supports Fast Discovery.
Use this option to configure the system to display the F1 key on the server POST screen. If an error is encountered, you can press the F1 key to continue with the server power-up sequence. Select one of the following options: Delayed 20 Seconds - If an error occurs, the system pauses for 20 seconds at the F1 prompt and continues to boot the OS. Delayed 2 Seconds - If an error occurs, the system pauses for 2 seconds at the F1 prompt and continues to boot the OS. Disabled - If an error occurs, the system bypasses the F1 prompt and continues to boot the OS. Note: For critical errors, the system pauses for 20 seconds at the F1 prompt, regardless of how this option is configured.
Select the display mode during boot up. When set to quiet mode, only the logo and progress bar are displayed. All informational messages and boot up graphics are hidden. When set to verbose mode, all boot up messages and graphics are displayed. You can also change the display mode from quiet to verbose while booting by pressing the TAB key when hotkeys are enabled.
Type
Enumeration
Read Only
False
Value
Description
QuietMode
Quiet Mode
VerboseMode
Verbose Mode
PostVideoSupport (POST Video Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure the POST Video Support setting. When set to Display All, the system will display POST video to all installed video controllers. When set to Display Embedded Only, the system will only display POST video to the embedded video controller. This option is only supported in UEFI Boot Mode and only applies to video output during the POST (pre-boot) environment.
Disabling this option disables the momentary power button functionality. This option does not affect the four-second power button override or the remote power control functionality.
Use this option to delay the server from turning on for a specified time. Pressing the power button (using the Virtual Power Button), or Wake-ON LAN events, and RTC Wake-up events override the delay and power on the server without any additional delay. This enables staggering when servers power-up after a power loss to prevent power usage spikes.Note that the actual delay before the server is powered on will be longer than the specified time because the server must always wait for iLO FW to initialize before the server attempts to power on.
You can only configure this option if the Workload Profile is set to Custom. Use this option to configure the following Power Regulator support: - Static High Performance Mode: Processors run in their maximum power/performance state at all times, regardless of the OS power management policy. - OS Control Mode: Processors run in their maximum power/performance state at all times unless the OS enables a power management policy.
Type
Enumeration
Read Only
False
Value
Description
StaticHighPerf
Static High Performance Mode
OsControl
OS Control Mode
PreBootNetwork (Pre-Boot Network Interface)
Member of Bios.v1_0_5.Bios
Description
Use this option to select the network interface used for pre-boot network connections. When the selection is Auto, the system uses the first available port with a network connection.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
Slot1NicPort1
Slot 1 NIC Port 1
Slot1NicPort2
Slot 1 NIC Port 2
Slot1NicPort3
Slot 1 NIC Port 3
Slot1NicPort4
Slot 1 NIC Port 4
Slot1NicPort5
Slot 1 NIC Port 5
Slot1NicPort6
Slot 1 NIC Port 6
Slot1NicPort7
Slot 1 NIC Port 7
Slot1NicPort8
Slot 1 NIC Port 8
Slot2NicPort1
Slot 2 NIC Port 1
Slot2NicPort2
Slot 2 NIC Port 2
Slot2NicPort3
Slot 2 NIC Port 3
Slot2NicPort4
Slot 2 NIC Port 4
Slot2NicPort5
Slot 2 NIC Port 5
Slot2NicPort6
Slot 2 NIC Port 6
Slot2NicPort7
Slot 2 NIC Port 7
Slot2NicPort8
Slot 2 NIC Port 8
Slot3NicPort1
Slot 3 NIC Port 1
Slot3NicPort2
Slot 3 NIC Port 2
Slot3NicPort3
Slot 3 NIC Port 3
Slot3NicPort4
Slot 3 NIC Port 4
Slot3NicPort5
Slot 3 NIC Port 5
Slot3NicPort6
Slot 3 NIC Port 6
Slot3NicPort7
Slot 3 NIC Port 7
Slot3NicPort8
Slot 3 NIC Port 8
Slot4NicPort1
Slot 4 NIC Port 1
Slot4NicPort2
Slot 4 NIC Port 2
Slot4NicPort3
Slot 4 NIC Port 3
Slot4NicPort4
Slot 4 NIC Port 4
Slot4NicPort5
Slot 4 NIC Port 5
Slot4NicPort6
Slot 4 NIC Port 6
Slot4NicPort7
Slot 4 NIC Port 7
Slot4NicPort8
Slot 4 NIC Port 8
Slot5NicPort1
Slot 5 NIC Port 1
Slot5NicPort2
Slot 5 NIC Port 2
Slot5NicPort3
Slot 5 NIC Port 3
Slot5NicPort4
Slot 5 NIC Port 4
Slot5NicPort5
Slot 5 NIC Port 5
Slot5NicPort6
Slot 5 NIC Port 6
Slot5NicPort7
Slot 5 NIC Port 7
Slot5NicPort8
Slot 5 NIC Port 8
Slot6NicPort1
Slot 6 NIC Port 1
Slot6NicPort2
Slot 6 NIC Port 2
Slot6NicPort3
Slot 6 NIC Port 3
Slot6NicPort4
Slot 6 NIC Port 4
Slot6NicPort5
Slot 6 NIC Port 5
Slot6NicPort6
Slot 6 NIC Port 6
Slot6NicPort7
Slot 6 NIC Port 7
Slot6NicPort8
Slot 6 NIC Port 8
Slot7NicPort1
Slot 7 NIC Port 1
Slot7NicPort2
Slot 7 NIC Port 2
Slot7NicPort3
Slot 7 NIC Port 3
Slot7NicPort4
Slot 7 NIC Port 4
Slot7NicPort5
Slot 7 NIC Port 5
Slot7NicPort6
Slot 7 NIC Port 6
Slot7NicPort7
Slot 7 NIC Port 7
Slot7NicPort8
Slot 7 NIC Port 8
Slot8NicPort1
Slot 8 NIC Port 1
Slot8NicPort2
Slot 8 NIC Port 2
Slot8NicPort3
Slot 8 NIC Port 3
Slot8NicPort4
Slot 8 NIC Port 4
Slot8NicPort5
Slot 8 NIC Port 5
Slot8NicPort6
Slot 8 NIC Port 6
Slot8NicPort7
Slot 8 NIC Port 7
Slot8NicPort8
Slot 8 NIC Port 8
Slot9NicPort1
Slot 9 NIC Port 1
Slot9NicPort2
Slot 9 NIC Port 2
Slot9NicPort3
Slot 9 NIC Port 3
Slot9NicPort4
Slot 9 NIC Port 4
Slot9NicPort5
Slot 9 NIC Port 5
Slot9NicPort6
Slot 9 NIC Port 6
Slot9NicPort7
Slot 9 NIC Port 7
Slot9NicPort8
Slot 9 NIC Port 8
Slot10NicPort1
Slot 10 NIC Port 1
Slot10NicPort2
Slot 10 NIC Port 2
Slot10NicPort3
Slot 10 NIC Port 3
Slot10NicPort4
Slot 10 NIC Port 4
Slot10NicPort5
Slot 10 NIC Port 5
Slot10NicPort6
Slot 10 NIC Port 6
Slot10NicPort7
Slot 10 NIC Port 7
Slot10NicPort8
Slot 10 NIC Port 8
Slot11NicPort1
Slot 11 NIC Port 1
Slot11NicPort2
Slot 11 NIC Port 2
Slot11NicPort3
Slot 11 NIC Port 3
Slot11NicPort4
Slot 11 NIC Port 4
Slot11NicPort5
Slot 11 NIC Port 5
Slot11NicPort6
Slot 11 NIC Port 6
Slot11NicPort7
Slot 11 NIC Port 7
Slot11NicPort8
Slot 11 NIC Port 8
Slot12NicPort1
Slot 12 NIC Port 1
Slot12NicPort2
Slot 12 NIC Port 2
Slot12NicPort3
Slot 12 NIC Port 3
Slot12NicPort4
Slot 12 NIC Port 4
Slot12NicPort5
Slot 12 NIC Port 5
Slot12NicPort6
Slot 12 NIC Port 6
Slot12NicPort7
Slot 12 NIC Port 7
Slot12NicPort8
Slot 12 NIC Port 8
Slot13NicPort1
Slot 13 NIC Port 1
Slot13NicPort2
Slot 13 NIC Port 2
Slot13NicPort3
Slot 13 NIC Port 3
Slot13NicPort4
Slot 13 NIC Port 4
Slot13NicPort5
Slot 13 NIC Port 5
Slot13NicPort6
Slot 13 NIC Port 6
Slot13NicPort7
Slot 13 NIC Port 7
Slot13NicPort8
Slot 13 NIC Port 8
Slot14NicPort1
Slot 14 NIC Port 1
Slot14NicPort2
Slot 14 NIC Port 2
Slot14NicPort3
Slot 14 NIC Port 3
Slot14NicPort4
Slot 14 NIC Port 4
Slot14NicPort5
Slot 14 NIC Port 5
Slot14NicPort6
Slot 14 NIC Port 6
Slot14NicPort7
Slot 14 NIC Port 7
Slot14NicPort8
Slot 14 NIC Port 8
Slot15NicPort1
Slot 15 NIC Port 1
Slot15NicPort2
Slot 15 NIC Port 2
Slot15NicPort3
Slot 15 NIC Port 3
Slot15NicPort4
Slot 15 NIC Port 4
Slot15NicPort5
Slot 15 NIC Port 5
Slot15NicPort6
Slot 15 NIC Port 6
Slot15NicPort7
Slot 15 NIC Port 7
Slot15NicPort8
Slot 15 NIC Port 8
Slot16NicPort1
Slot 16 NIC Port 1
Slot16NicPort2
Slot 16 NIC Port 2
Slot16NicPort3
Slot 16 NIC Port 3
Slot16NicPort4
Slot 16 NIC Port 4
Slot16NicPort5
Slot 16 NIC Port 5
Slot16NicPort6
Slot 16 NIC Port 6
Slot16NicPort7
Slot 16 NIC Port 7
Slot16NicPort8
Slot 16 NIC Port 8
Slot17NicPort1
Slot 17 NIC Port 1
Slot17NicPort2
Slot 17 NIC Port 2
Slot17NicPort3
Slot 17 NIC Port 3
Slot17NicPort4
Slot 17 NIC Port 4
Slot17NicPort5
Slot 17 NIC Port 5
Slot17NicPort6
Slot 17 NIC Port 6
Slot17NicPort7
Slot 17 NIC Port 7
Slot17NicPort8
Slot 17 NIC Port 8
Slot18NicPort1
Slot 18 NIC Port 1
Slot18NicPort2
Slot 18 NIC Port 2
Slot18NicPort3
Slot 18 NIC Port 3
Slot18NicPort4
Slot 18 NIC Port 4
Slot18NicPort5
Slot 18 NIC Port 5
Slot18NicPort6
Slot 18 NIC Port 6
Slot18NicPort7
Slot 18 NIC Port 7
Slot18NicPort8
Slot 18 NIC Port 8
Slot19NicPort1
Slot 19 NIC Port 1
Slot19NicPort2
Slot 19 NIC Port 2
Slot19NicPort3
Slot 19 NIC Port 3
Slot19NicPort4
Slot 19 NIC Port 4
Slot19NicPort5
Slot 19 NIC Port 5
Slot19NicPort6
Slot 19 NIC Port 6
Slot19NicPort7
Slot 19 NIC Port 7
Slot19NicPort8
Slot 19 NIC Port 8
Slot20NicPort1
Slot 20 NIC Port 1
Slot20NicPort2
Slot 20 NIC Port 2
Slot20NicPort3
Slot 20 NIC Port 3
Slot20NicPort4
Slot 20 NIC Port 4
Slot20NicPort5
Slot 20 NIC Port 5
Slot20NicPort6
Slot 20 NIC Port 6
Slot20NicPort7
Slot 20 NIC Port 7
Slot20NicPort8
Slot 20 NIC Port 8
Slot21NicPort1
Slot 21 NIC Port 1
Slot21NicPort2
Slot 21 NIC Port 2
Slot21NicPort3
Slot 21 NIC Port 3
Slot21NicPort4
Slot 21 NIC Port 4
Slot21NicPort5
Slot 21 NIC Port 5
Slot21NicPort6
Slot 21 NIC Port 6
Slot21NicPort7
Slot 21 NIC Port 7
Slot21NicPort8
Slot 21 NIC Port 8
Slot22NicPort1
Slot 22 NIC Port 1
Slot22NicPort2
Slot 22 NIC Port 2
Slot22NicPort3
Slot 22 NIC Port 3
Slot22NicPort4
Slot 22 NIC Port 4
Slot22NicPort5
Slot 22 NIC Port 5
Slot22NicPort6
Slot 22 NIC Port 6
Slot22NicPort7
Slot 22 NIC Port 7
Slot22NicPort8
Slot 22 NIC Port 8
PrebootNetworkEnvPolicy (Pre-Boot Network Environment)
Member of Bios.v1_0_5.Bios
Description
Use this option to set the preference for Pre-Boot Network. If configured for Auto, all the network operations initiated in the pre boot environment occur over IPv4 or IPv6. The order of the existing network boot targets is not modified in the UEFI Boot Order list. New network boot targets are added to the end of the list using the default policy of the System BIOS. If configured for IPv4, all the network operations initiated in the pre boot environment only occur over IPv4. All existing IPv6 network boot targets are removed in the UEFI Boot Order. No new IPv6 network boot targets are added to the list. If configured for IPv6, all the network operations initiated in the pre boot environment only occur over IPv6. All existing IPv4 network boot targets in the UEFI Boot Order are removed. No new IPv4 network boot targets are added to the list.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
IPv4
IPv4
IPv6
IPv6
PrebootNetworkProxy (Pre-Boot Network Proxy)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure a pre-boot network proxy. When set, network operations for 'Pre-Boot Network Interface' are attempted through the configured proxy. The proxy must be in an HTTP URL format, and can be specified as http://IPv4_address:port, http://IPv6 address:port or http://FQDN:port.
Type
String
Read Only
False
ProcAMDBoost (AMD Core Performance Boost)
Member of Bios.v1_0_5.Bios
Description
AMD Core Performance Boost enables the processor to transition to a higher frequency than the processor's rated speed if the processor has available power and is within temperature specifications. Disabling this option reduces power usage and also reduces the system's maximum achievable performance under some workloads.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
Enabled
Enabled
ProcAMDBoostControl (AMD Fmax Boost Limit Control)
Member of Bios.v1_0_5.Bios
Description
AMD Fmax Boost Limit setting sets the maximum processor boost frequency. Auto will allow the processor to run at the highest possible boost frequencies. Manual will allow the user to configure a lower maximum boost frequency.
AMD Fmax Boost Limit setting sets the maximum processor boost frequency.
Type
Integer
Read Only
False
ProcAmdIoVt (AMD I/O Virtualization Technology)
Member of Bios.v1_0_5.Bios
Description
This option enables or disables capabilities provided by AMD I/O Virtualization (IOMMU) functionality. This option can be left enabled for all operating environments, including those that do not make use of this capability. When this option is enabled on systems containing 1TB or more of installed memory, 4GB of memory will be reserved near the 1TB address boundary and will not be available to the operating system. When this option is enabled on systems with less than 1TB of installed memory, the memory mapped I/O address range will begin at the 1TB address boundary which should have no impact to system operation and would not impact the memory available to the operating system.
Use this option to enable or disable AMD SMT. When enabled, each physical processor core operates as two logical processor cores. When disabled, each physical processor core operates as only one logical processor core. Enabling this option can improve overall performance for applications that benefit from a higher processor core count.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
ProcX2Apic (Processor x2APIC Support)
Member of Bios.v1_0_5.Bios
Description
x2APIC support enables operating systems to run more efficiently on high core count configurations. It also optimizes interrupt distribution in virtualized environments. In most cases, set this option to Auto. This configures the operating system to enable x2APIC support depending on the processor and chipset design. When this setting is greyed-out, X2Apic was automatically enabled.
Use this option to set the system product ID. This value must always match the product ID sticker located on the chassis.
Type
String
Read Only
False
Pstate0Frequency (Pstate0 Frequency (MHz))
Member of Bios.v1_0_5.Bios
Description
Specifies core frequency (MHz)
Type
Integer
Read Only
False
RedundantPowerSupplyGpuDomain (Redundant Power Supply Mode - GPU Domain)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure how the system handles redundant power supply configurations. Balanced Mode shares the power delivery equally between all installed power supplies. All High Efficiency Mode options provide the most power efficient operation with redundant power supplies by keeping half of the power supplies in standby mode at lower power usage levels. The High Efficiency Mode options enable the system to select which power supply to place in standby. Auto enables the system to select between the odd or even power supply based on a semi-random distribution within a group of systems.
Type
Enumeration
Read Only
False
Value
Description
BalancedMode
Balanced Mode
HighEfficiencyAuto
High Efficiency Mode (Auto)
HighEfficiencyOddStandby
High Efficiency Mode (Odd Supply Standby)
HighEfficiencyEvenStandby
High Efficiency Mode (Even Supply Standby)
RedundantPowerSupplySystemDomain (Redundant Power Supply Mode - System Domain)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure how the system handles redundant power supply configurations. Balanced Mode shares the power delivery equally between all installed power supplies. All High Efficiency Mode options provide the most power efficient operation with redundant power supplies by keeping half of the power supplies in standby mode at lower power usage levels. The High Efficiency Mode options enable the system to select which power supply to place in standby. Auto enables the system to select between the odd or even power supply based on a semi-random distribution within a group of systems.
Type
Enumeration
Read Only
False
Value
Description
BalancedMode
Balanced Mode
HighEfficiencyAuto
High Efficiency Mode (Auto)
HighEfficiencyOddStandby
High Efficiency Mode (Odd Supply Standby)
HighEfficiencyEvenStandby
High Efficiency Mode (Even Supply Standby)
RestoreDefaults (Restore Default System Settings)
Member of Bios.v1_0_5.Bios
Description
Use this option to reset all configuration settings to their default values. Changes that have been made might be lost. You must reboot the system for changes to take effect.
Type
Enumeration
Read Only
False
Value
Description
No
No, cancel the restore procedure.
Yes
Yes, restore the default settings.
RestoreManufacturingDefaults (Restore Default Manufacturing Settings)
Member of Bios.v1_0_5.Bios
Description
Use this option to reset all configuration settings to their default manufacturing values. Changes that have been made might be lost. If Secure Boot is enabled, related security settings might be lost. You must reboot the system for changes to take effect.
Use this option to control whether sanitize functionality is supported. When enabled, the Sanitize Freeze Lock command is not sent to supported SATA hard drives, enabling sanitize operation to function (the Sanitize command is supported). This option is only supported when the SATA controller is in AHCI mode. Sanitize operation only operates with hard drives that support the sanitize command.
Use this option to control whether Secure Erase functionality is supported. When enabled, the Security Freeze Lock command is not sent to supported SATA hard drives, enabling Secure erase to function (the Secure Erase command is supported). This option is only supported when the SATA controller is in AHCI mode. Secure Erase only operates with hard drives that support the Secure Erase command.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
SaveUserDefaults (Save User Defaults)
Member of Bios.v1_0_5.Bios
Description
Select this option to save the current settings as the system defaults.
Use this option to select the System Control Interrupt (SCI) signaling mode of operation. This setting can be used to allow how the system will signal the Operating System for certain error conditions. Certain resiliency features, such as Page Retire, require this setting to be set properly to allow the Operating System to properly react to the error event. Please consult documentation for which Operating Systems support which modes of SCI operation.
Type
Enumeration
Read Only
False
Value
Description
Ghesv1Support
GHES v1 Support
Ghesv2Support
GHES v2 Support
SecStartBackupImage (Backup ROM Image Authentication)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable cryptographic authentication of the backup ROM image on startup. When this option is disabled, only the primary image is authenticated on each startup. Enable this option to also perform cryptographic authentication of the backup ROM image.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
SecureBootStatus (Secure Boot Status)
Member of Bios.v1_0_5.Bios
Description
The current state of Secure Boot configuration.
Type
Enumeration
Read Only
True
Value
Description
Enabled
Enabled
Disabled
Disabled
SerialConsoleBaudRate (BIOS Serial Console Baud Rate)
Member of Bios.v1_0_5.Bios
Description
This is the transfer rate at which data is transmitted through the serial port.
Type
Enumeration
Read Only
False
Value
Description
BaudRate9600
9600
BaudRate19200
19200
BaudRate38400
38400
BaudRate57600
57600
BaudRate115200
115200
SerialConsoleEmulation (BIOS Serial Console Emulation Mode)
Member of Bios.v1_0_5.Bios
Description
Use this option to select the emulation mode type. The option you select depends on the emulation you want to use in your serial terminal program (such as HyperTerminal or PuTTy). The BIOS emulation mode must match the mode you select in your terminal program.
Type
Enumeration
Read Only
False
Value
Description
Vt100
VT100
Ansi
ANSI
Vt100Plus
VT100+
VtUtf8
VT-UTF8
SerialConsolePort (BIOS Serial Console Port)
Member of Bios.v1_0_5.Bios
Description
Use this option to re-direct video and keystrokes through the serial port to OS boot. This option can interfere with non-terminal devices attached to the serial port. In such cases, set this option to disabled. This option is only supported in English language mode when running in the UEFI pre-boot System Utilities.
ServiceOtherInfo (Service Contact Other Information)
Member of Bios.v1_0_5.Bios
Description
Enter the other server service contact information text.
Type
String
Read Only
False
ServicePhone (Service Contact Phone Number)
Member of Bios.v1_0_5.Bios
Description
Enter the server service contact phone number text.
Type
String
Read Only
False
SetupBrowserSelection (Setup Browser Selection)
Member of Bios.v1_0_5.Bios
Description
Select which setup browser to use: GUI or Text. Auto mode uses text when the user enters RBSU via serial console, and uses GUI via IRC or physical terminal.
Type
Enumeration
Read Only
False
Value
Description
GUI
GUI
Text
Text
Auto
Auto
Slot10MctpBroadcastSupport (PCIe Slot 10 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot10NicBoot1 (Slot 10 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot10NicBoot2 (Slot 10 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot10NicBoot3 (Slot 10 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot10NicBoot4 (Slot 10 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot10NicBoot5 (Slot 10 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot10NicBoot6 (Slot 10 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot10NicBoot7 (Slot 10 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot10NicBoot8 (Slot 10 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot11MctpBroadcastSupport (PCIe Slot 11 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot11NicBoot1 (Slot 11 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot11NicBoot2 (Slot 11 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot11NicBoot3 (Slot 11 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot11NicBoot4 (Slot 11 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot11NicBoot5 (Slot 11 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot11NicBoot6 (Slot 11 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot11NicBoot7 (Slot 11 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot11NicBoot8 (Slot 11 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot12MctpBroadcastSupport (PCIe Slot 12 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot12NicBoot1 (Slot 12 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot12NicBoot2 (Slot 12 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot12NicBoot3 (Slot 12 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot12NicBoot4 (Slot 12 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot12NicBoot5 (Slot 12 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot12NicBoot6 (Slot 12 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot12NicBoot7 (Slot 12 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot12NicBoot8 (Slot 12 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot13MctpBroadcastSupport (PCIe Slot 13 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot13NicBoot1 (Slot 13 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot13NicBoot2 (Slot 13 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot13NicBoot3 (Slot 13 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot13NicBoot4 (Slot 13 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot13NicBoot5 (Slot 13 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot13NicBoot6 (Slot 13 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot13NicBoot7 (Slot 13 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot13NicBoot8 (Slot 13 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot14MctpBroadcastSupport (PCIe Slot 14 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot14NicBoot1 (Slot 14 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot14NicBoot2 (Slot 14 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot14NicBoot3 (Slot 14 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot14NicBoot4 (Slot 14 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot14NicBoot5 (Slot 14 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot14NicBoot6 (Slot 14 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot14NicBoot7 (Slot 14 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot14NicBoot8 (Slot 14 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot15MctpBroadcastSupport (PCIe Slot 15 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot15NicBoot1 (Slot 15 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot15NicBoot2 (Slot 15 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot15NicBoot3 (Slot 15 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot15NicBoot4 (Slot 15 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot15NicBoot5 (Slot 15 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot15NicBoot6 (Slot 15 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot15NicBoot7 (Slot 15 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot15NicBoot8 (Slot 15 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot16MctpBroadcastSupport (PCIe Slot 16 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot16NicBoot1 (Slot 16 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot16NicBoot2 (Slot 16 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot16NicBoot3 (Slot 16 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot16NicBoot4 (Slot 16 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot16NicBoot5 (Slot 16 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot16NicBoot6 (Slot 16 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot16NicBoot7 (Slot 16 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot16NicBoot8 (Slot 16 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot17MctpBroadcastSupport (PCIe Slot 17 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot17NicBoot1 (Slot 17 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot17NicBoot2 (Slot 17 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot17NicBoot3 (Slot 17 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot17NicBoot4 (Slot 17 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot17NicBoot5 (Slot 17 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot17NicBoot6 (Slot 17 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot17NicBoot7 (Slot 17 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot17NicBoot8 (Slot 17 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot18MctpBroadcastSupport (PCIe Slot 18 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot18NicBoot1 (Slot 18 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot18NicBoot2 (Slot 18 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot18NicBoot3 (Slot 18 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot18NicBoot4 (Slot 18 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot18NicBoot5 (Slot 18 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot18NicBoot6 (Slot 18 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot18NicBoot7 (Slot 18 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot18NicBoot8 (Slot 18 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot19MctpBroadcastSupport (PCIe Slot 19 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot19NicBoot1 (Slot 19 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot19NicBoot2 (Slot 19 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot19NicBoot3 (Slot 19 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot19NicBoot4 (Slot 19 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot19NicBoot5 (Slot 19 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot19NicBoot6 (Slot 19 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot19NicBoot7 (Slot 19 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot19NicBoot8 (Slot 19 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot1MctpBroadcastSupport (PCIe Slot 1 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot1NicBoot1 (Slot 1 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot1NicBoot2 (Slot 1 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot1NicBoot3 (Slot 1 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot1NicBoot4 (Slot 1 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot1NicBoot5 (Slot 1 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot1NicBoot6 (Slot 1 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot1NicBoot7 (Slot 1 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot1NicBoot8 (Slot 1 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot20MctpBroadcastSupport (PCIe Slot 20 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot20NicBoot1 (Slot 20 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot20NicBoot2 (Slot 20 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot20NicBoot3 (Slot 20 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot20NicBoot4 (Slot 20 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot20NicBoot5 (Slot 20 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot20NicBoot6 (Slot 20 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot20NicBoot7 (Slot 20 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot20NicBoot8 (Slot 20 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot21MctpBroadcastSupport (PCIe Slot 21 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot21NicBoot1 (Slot 21 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot21NicBoot2 (Slot 21 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot21NicBoot3 (Slot 21 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot21NicBoot4 (Slot 21 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot21NicBoot5 (Slot 21 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot21NicBoot6 (Slot 21 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot21NicBoot7 (Slot 21 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot21NicBoot8 (Slot 21 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot22MctpBroadcastSupport (PCIe Slot 22 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot22NicBoot1 (Slot 22 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot22NicBoot2 (Slot 22 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot22NicBoot3 (Slot 22 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot22NicBoot4 (Slot 22 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot22NicBoot5 (Slot 22 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot22NicBoot6 (Slot 22 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot22NicBoot7 (Slot 22 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot22NicBoot8 (Slot 22 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot23MctpBroadcastSupport (PCIe Slot 23 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot2MctpBroadcastSupport (PCIe Slot 2 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot2NicBoot1 (Slot 2 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot2NicBoot2 (Slot 2 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot2NicBoot3 (Slot 2 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot2NicBoot4 (Slot 2 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot2NicBoot5 (Slot 2 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot2NicBoot6 (Slot 2 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot2NicBoot7 (Slot 2 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot2NicBoot8 (Slot 2 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot3MctpBroadcastSupport (PCIe Slot 3 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot3NicBoot1 (Slot 3 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot3NicBoot2 (Slot 3 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot3NicBoot3 (Slot 3 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot3NicBoot4 (Slot 3 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot3NicBoot5 (Slot 3 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot3NicBoot6 (Slot 3 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot3NicBoot7 (Slot 3 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot3NicBoot8 (Slot 3 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot4MctpBroadcastSupport (PCIe Slot 4 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot4NicBoot1 (Slot 4 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot4NicBoot2 (Slot 4 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot4NicBoot3 (Slot 4 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot4NicBoot4 (Slot 4 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot4NicBoot5 (Slot 4 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot4NicBoot6 (Slot 4 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot4NicBoot7 (Slot 4 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot4NicBoot8 (Slot 4 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot5MctpBroadcastSupport (PCIe Slot 5 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot5NicBoot1 (Slot 5 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot5NicBoot2 (Slot 5 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot5NicBoot3 (Slot 5 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot5NicBoot4 (Slot 5 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot5NicBoot5 (Slot 5 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot5NicBoot6 (Slot 5 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot5NicBoot7 (Slot 5 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot5NicBoot8 (Slot 5 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot6MctpBroadcastSupport (PCIe Slot 6 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot6NicBoot1 (Slot 6 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot6NicBoot2 (Slot 6 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot6NicBoot3 (Slot 6 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot6NicBoot4 (Slot 6 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot6NicBoot5 (Slot 6 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot6NicBoot6 (Slot 6 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot6NicBoot7 (Slot 6 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot6NicBoot8 (Slot 6 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot7MctpBroadcastSupport (PCIe Slot 7 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot7NicBoot1 (Slot 7 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot7NicBoot2 (Slot 7 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot7NicBoot3 (Slot 7 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot7NicBoot4 (Slot 7 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot8MctpBroadcastSupport (PCIe Slot 8 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot8NicBoot1 (Slot 8 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot8NicBoot2 (Slot 8 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot8NicBoot3 (Slot 8 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot8NicBoot4 (Slot 8 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
Slot9MctpBroadcastSupport (PCIe Slot 9 MCTP Broadcast Support)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the PCIe Management Component Transport Protocol (MCTP) Support for a given slot. This option can be used to disable MCTP support to a given PCIe endpoint that may not properly support this protocol. It is recommended that this option remain enabled for full system functionality.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
Slot9NicBoot1 (Slot 9 NIC Port 1 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot9NicBoot2 (Slot 9 NIC Port 2 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot9NicBoot3 (Slot 9 NIC Port 3 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot9NicBoot4 (Slot 9 NIC Port 4 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot9NicBoot5 (Slot 9 NIC Port 5 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot9NicBoot6 (Slot 9 NIC Port 6 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot9NicBoot7 (Slot 9 NIC Port 7 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
Type
Enumeration
Read Only
False
Value
Description
NetworkBoot
Network Boot
Disabled
Disabled
Slot9NicBoot8 (Slot 9 NIC Port 8 Boot)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable network boot (PXE, iSCSI or UEFI HTTP) for the selected NIC. You might need to configure the NIC firmware for the boot option to be active. This is applicable only in UEFI Boot Mode.
When Boot All Targets is selected, all valid boot targets attached to the storage controller are made available in the UEFI Boot Order list. If Boot No Targets is selected, no boot targets from this storage controller are made available in the UEFI Boot Order.If Boot Limit to 32 Targets is selected, 32 boot targets attached to the storage controller are made available in the UEFI Boot Order.
Type
Enumeration
Read Only
False
Value
Description
AllTargets
Boot All Targets
ThirtyTwoTargets
Boot Limit to 32 Targets
NoTargets
Boot No Targets
SpeculativeLockScheduling (Page Table Entry Speculative Lock Scheduling )
Member of Bios.v1_0_5.Bios
Description
Disabling this forces Page Table Entry locks to only be scheduled non-speculatively. Disabling this feature will impact performance
If enabled, SR-IOV support enables a hypervisor to create virtual instances of a PCI-express device, potentially increasing performance. If enabled, the BIOS allocates additional resources to PCI-express devices. You can leave this option set to enabled even if you are not using a hypervisor.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
TPM2EndorsementDisable (TPM 2.0 Endorsement Hierarchy)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable/disable the TPM 2.0 Endorsement Hierarchy. When the TPM 2.0 Endorsement Hierarchy is disabled, certain TPM functionality under the operating system may not operate properly.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
TPM2StorageDisable (TPM 2.0 Storage Hierarchy)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable/disable the TPM 2.0 Storage Hierarchy. When the TPM 2.0 Storage Hierarchy is disabled, certain TPM functionality under the operating system may not operate properly.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
ThermalConfig (Thermal Configuration)
Member of Bios.v1_0_5.Bios
Description
Use this option to select the fan cooling solution for the system. Optimal Cooling provides the most efficient solution by configuring fan speeds to the minimum required speed to provide adequate cooling. Increased Cooling runs fans at higher speeds to provide additional cooling. Select Increased Cooling when third-party storage controllers are cabled to the embedded hard drive cage, or if the system is experiencing thermal issues that cannot be resolved. Maximum cooling provides the maximum cooling available on this platform. Enhanced CPU Cooling runs the fans at a higher speed to provide additional cooling to the processors. Selecting Enhanced CPU Cooling may improve system performance with certain processor intensive workloads.
Use this option to control the reaction of the system to caution level thermal events. When disabled, the System Management Firmware ignores thermal events, and the system immediately powers off in data-destructive situations.
This option controls how the system time is stored in the hardware Real Time Clock (RTC). When configured to 'Coordinated Universal Time (UTC)' (default) the local time is calculated from the associated time zone value. When configured to 'Local Time' the time is stored directly as local time and the time zone option does not have meaning.
Use this option to perform a clear operation on the TPM. Clearing the TPM can prevent the server from booting to a TPM-aware operating system if the operating system uses TPM's measurements.
Type
Enumeration
Read Only
False
Value
Description
NoAction
No Action
Clear
Clear
TpmActivePcrs (Current TPM 2.0 Active PCRs)
Member of Bios.v1_0_5.Bios
Description
Current TPM 2.0 Active PCRs: SHA1, SHA256, SHA384, SHA1SHA256, or SHA256SHA384
Use this option to hide the TPM from the operating system. When the TPM is hidden, BIOS secure startup is disabled, and the TPM does not respond to any commands. Intended use is for removing the TPM option from the system without removing the actual hardware.This option will also disable the TPM 2.0 (if active) Platform, Storage and Endorsement Hierarchies. This option is grayed out when Platform Certificate Support is enabled.
Type
Enumeration
Read Only
False
Value
Description
Hidden
Hidden
Visible
Visible
TransparentSecureMemoryEncryption (Transparent Secure Memory Encryption)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable TSME
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
UefiSerialDebugLevel (UEFI Serial Debug Message Level)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable UEFI Serial Debug output and verbosity level. Selecting Verbose can impact server boot time significantly.
Type
Enumeration
Read Only
False
Value
Description
Disabled
Disabled
ErrorsOnly
Errors Only
Medium
Medium
Network
Network
Verbose
Verbose
Custom
Custom
UefiShellBootOrder (Add Embedded UEFI Shell to Boot Order)
Member of Bios.v1_0_5.Bios
Description
When enabled, this option adds the Embedded UEFI Shell as an entry in the UEFI Boot Order list. This option is only available when the Embedded UEFI Shell is enabled.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
UefiShellPhysicalPresenceKeystroke (Physical Presence with Keystroke)
Member of Bios.v1_0_5.Bios
Description
Use the option to enable or disable Physical Presence with Keystroke. If enabled, a countdown starts after entering Embedded UEFI Shell and stops when a keystroke is detected. If no keystroke is detected by the end of the countdown, or if the option is disabled, certain configuration actions are prevented.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
UefiShellScriptVerification (Shell Script Verification)
Member of Bios.v1_0_5.Bios
Description
Enable this option to allow verification of UEFI shell script files when Secure Boot is enabled. For successful execution of script, make sure that UEFI shell scripts are enrolled in the Secure Boot database (db).
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
UefiShellStartup (UEFI Shell Script Auto-Start)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable automatic execution of the Embedded UEFI Shell startup script. You can store the script file on local media or access it from a network location. You must name the script file "startup.nsh" and place it on local media or a network location accessible to the server.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
UefiShellStartupLocation (Shell Auto-Start Script Location)
Member of Bios.v1_0_5.Bios
Description
Use this option to select the location of the Embedded UEFI Shell startup script. For the 'File Systems on Attached Media' option, you must name the script file "startup.nsh" and place it on a UEFI accessible local file system, such as a FAT32 partition on a USB disk or HDD. For the 'Network Location' option, the file must end with a .nsh extension, and must be placed at an HTTP/HTTPS or FTP location accessible to the system. When you select the 'Auto' option, the system attempts to retrieve the startup script from the network location first, followed by locally attached media.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
AttachedMedia
File Systems on Attached Media
NetworkLocation
Network Location
UefiShellStartupUrl (Network Location for Shell Auto-Start Script)
Member of Bios.v1_0_5.Bios
Description
Use this option to configure a network URL to a UEFI Shell startup script. This option is available and used only when the Auto-Start Script Location is set to 'Network Location', or 'Auto', and the Shell Auto-Start Script discovery using DHCP is set to 'Disabled'. URLs in HTTP/HTTPS are accepted using either an IPv4 or IPv6 server address, or using a host name. FTP formats are accepted using either an IPv4 server address or a host name. For example, the URLs can be in any of the following formats: http://192.168.0.1/file/file.nsh, http://example.com/file/file.nsh, https://example.com/file/file.nsh, http://[1234::1000]/file.nsh. The file must end with an .nsh extension. When configured, the Embedded UEFI Shell attempts to load and execute the startup script from the network location pointed to by this URL. When an HTTPS URL is configured, you must enroll the respective HTTPS server's TLS certificate under Server Security > TLS(HTTPS) Options.
Type
String
Read Only
False
UefiShellStartupUrlFromDhcp (Discover Shell Auto-Start Script using DHCP)
Member of Bios.v1_0_5.Bios
Description
Use this option to let the Shell discover its startup script URL using DHCP. This option is available only if the 'HTTP Support' policy is not set to 'Disabled' and Auto-Start Script Location is set to 'Network Location', or 'Auto'. When set to 'Enabled', the Shell sends DHCP requests with the DHCP User Class option set to the string 'UEFIShell'. The DHCP server must be configured to provide HTTP/HTTPS or FTP URLs when this DHCP User Class string is present in the DHCP request. The User Class option is Option 77 when using DHCP over IPv4, and Option 15 when using DHCP over IPv6. URLs in HTTP/HTTPS must use either an IPv4 or IPv6 server address, or a host name. FTP formats are accepted using either an IPv4 server address or a host name. The URL provided by the DHCP server should match the 'HTTP Support' policy. When 'HTTP Support' policy is set to 'Auto', any HTTP/HTTPS or FTP URL provided by the DHCP server is used. When policy is set to 'HTTPS only', only HTTPS URLs are used, and other URLs are ignored. When policy is set to 'HTTP only', only HTTP or FTP URLs are used, and other URLs are ignored. When policy is set to 'Disabled', the Shell does not send any DHCP request.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
UefiVariableAccessFwControl (UEFI Variable Access Firmware Control)
Member of Bios.v1_0_5.Bios
Description
Use this option to allow the system BIOS to completely control certain UEFI variables from being written to by other software such as an Operating System. When Disabled is selected, all UEFI variables are writable. When Enabled is selected, all changes made by software other than the system BIOS to critical UEFI variables will be blocked. For instance, new boot options the Operating System attempt to add to the top of BootOrder will actually be placed at the bottom of the BootOrder. Note: When UEFI Variable Access Firmware Control is Enabled, some Operating System functionality may not work as expected. Errors may occur while installing a new Operating System.
Use this option to configure a network URL to a bootable ISO or EFI file. URLs in HTTP/HTTPS are accepted using either an IPv4 or IPv6 server address, or using a host name. For example, the URLs can be in any of the following formats: http://192.168.0.1/file/image.iso, http://example.com/file/image.efi, https://example.com/file/image.efi, http://[1234::1000]/image.iso. When configured, this URL is listed as a boot option in the UEFI boot menu. Selecting this boot option downloads the file to the system memory, and configures the system to attempt to boot from it. There is no specific ordering on this option. It can be independently ordered in the boot menu. This setting requires configuring the 'Pre-Boot Network Interface' option if you want to access the URL location through a specific network interface. When an HTTPS URL is configured, this setting requires enrolling the respective TLS certificate of the HTTPS server under Server Security > TLS(HTTPS) Options. This option uses the IP address settings configured in this page. This is only applicable in UEFI Mode. Note: Booting from an ISO file can involve only booting a preliminary OS environment image, such as WinPE or a mini Linux, or a complete OS install image if the OS supports the HTTP Boot feature (Old OS versions may not support this). Please check your OS documentation for the HTTP Boot feature support.
Use this option to configure a network URL to a bootable ISO or EFI file. URLs in HTTP/HTTPS are accepted using either an IPv4 or IPv6 server address, or using a host name. For example, the URLs can be in any of the following formats: http://192.168.0.1/file/image.iso, http://example.com/file/image.efi, https://example.com/file/image.efi, http://[1234::1000]/image.iso. When configured, this URL is listed as a boot option in the UEFI boot menu. Selecting this boot option downloads the file to the system memory, and configures the system to attempt to boot from it. There is no specific ordering on this option. It can be independently ordered in the boot menu. This setting requires configuring the 'Pre-Boot Network Interface' option if you want to access the URL location through a specific network interface. When an HTTPS URL is configured, this setting requires enrolling the respective TLS certificate of the HTTPS server under Server Security > TLS(HTTPS) Options. This option uses the IP address settings configured in this page. This is only applicable in UEFI Mode. Note: Booting from an ISO file can involve only booting a preliminary OS environment image, such as WinPE or a mini Linux, or a complete OS install image if the OS supports the HTTP Boot feature (Old OS versions may not support this). Please check your OS documentation for the HTTP Boot feature support.
Use this option to configure a network URL to a bootable ISO or EFI file. URLs in HTTP/HTTPS are accepted using either an IPv4 or IPv6 server address, or using a host name. For example, the URLs can be in any of the following formats: http://192.168.0.1/file/image.iso, http://example.com/file/image.efi, https://example.com/file/image.efi, http://[1234::1000]/image.iso. When configured, this URL is listed as a boot option in the UEFI boot menu. Selecting this boot option downloads the file to the system memory, and configures the system to attempt to boot from it. There is no specific ordering on this option. It can be independently ordered in the boot menu. This setting requires configuring the 'Pre-Boot Network Interface' option if you want to access the URL location through a specific network interface. When an HTTPS URL is configured, this setting requires enrolling the respective TLS certificate of the HTTPS server under Server Security > TLS(HTTPS) Options. This option uses the IP address settings configured in this page. This is only applicable in UEFI Mode. Note: Booting from an ISO file can involve only booting a preliminary OS environment image, such as WinPE or a mini Linux, or a complete OS install image if the OS supports the HTTP Boot feature (Old OS versions may not support this). Please check your OS documentation for the HTTP Boot feature support.
Use this option to configure a network URL to a bootable ISO or EFI file. URLs in HTTP/HTTPS are accepted using either an IPv4 or IPv6 server address, or using a host name. For example, the URLs can be in any of the following formats: http://192.168.0.1/file/image.iso, http://example.com/file/image.efi, https://example.com/file/image.efi, http://[1234::1000]/image.iso. When configured, this URL is listed as a boot option in the UEFI boot menu. Selecting this boot option downloads the file to the system memory, and configures the system to attempt to boot from it. There is no specific ordering on this option. It can be independently ordered in the boot menu. This setting requires configuring the 'Pre-Boot Network Interface' option if you want to access the URL location through a specific network interface. When an HTTPS URL is configured, this setting requires enrolling the respective TLS certificate of the HTTPS server under Server Security > TLS(HTTPS) Options. This option uses the IP address settings configured in this page. This is only applicable in UEFI Mode. Note: Booting from an ISO file can involve only booting a preliminary OS environment image, such as WinPE or a mini Linux, or a complete OS install image if the OS supports the HTTP Boot feature (Old OS versions may not support this). Please check your OS documentation for the HTTP Boot feature support.
Set this option to disabled to prevent the system from booting to any USB devices connected to the server. This includes preventing boot to virtual media devices, and the embedded SD or uSD card (if supported). If this option is disabled, firmware updates from OneView will not work.
All USB Ports Enabled: Enables all USB ports and embedded devices.All USB Ports Disabled: Disables all USB ports and embedded devices.External USB Ports Disabled: Disables only external USB ports.Internal USB Ports Disabled: Disables only internal USB ports.
Use this option to configure video settings in the system. When set to Add-in Video Enabled, Embedded Video Disabled, the system only displays video to the first discovered add-in video controller. When set to Both Add-in and Embedded Video Enabled, the system displays video to both the embedded and the first discovered add-in video controllers. In both modes, early system startup video is displayed to the embedded video controller.
Type
Enumeration
Read Only
False
Value
Description
OptionalVideoOnly
Add-in Video Enabled, Embedded Video Disabled
BothVideoEnabled
Both Add-in and Embedded Video Enabled
VirtualInstallDisk (Virtual Install Disk)
Member of Bios.v1_0_5.Bios
Description
Use this option to control the Virtual Install Disk. The Virtual Install Disk contains drivers specific to this server that an OS can use during installation. If enabled, the Virtual Install Disk appears as a drive in the operating system.
Type
Enumeration
Read Only
False
Value
Description
Enabled
Enabled
Disabled
Disabled
VirtualSerialPort (Virtual Serial Port)
Member of Bios.v1_0_5.Bios
Description
Use this option to assign the logical COM port address and associated default resources used by the Virtual Serial Port (VSP). VSP enables the Management Processor to present an emulated serial port to support the BIOS Serial Console and operating system serial console. Note: VSP and Embedded Serial Port cannot be set to the same port. If VSP is changed to the same port as Embedded Serial Port, the Embedded Serial Port will automatically be reassigned.
Use this option to set the global VLAN ID for all enabled network interfaces. Valid values are 0 to 4094.A value of 0 sets the device to send untagged frames.
You can configure the server to be powered on remotely when it receives a special packet. This option requires a NIC, NIC driver, and operating system that are WOL-capable.
Select this option to change the Workload Profile to accommodate your desired workload. Settings that are changed by the Workload Profile are grayed out and unchangeable unless in the 'Custom' profile. Please refer to the 'UEFI Workload-based Performance Tuning Guide' for details on which profiles affect which options.
Type
Enumeration
Read Only
False
Value
Description
GeneralPowerEfficientCompute
General Power Efficient Compute
GeneralPeakFrequencyCompute
General Peak Frequency Compute
GeneralThroughputCompute
General Throughput Compute
Virtualization-PowerEfficient
Virtualization - Power Efficient
Virtualization-MaxPerformance
Virtualization - Max Performance
LowLatency
Low Latency
MissionCritical
Mission Critical
TransactionalApplicationProcessing
Transactional Application Processing
HighPerformanceCompute(HPC)
High Performance Compute (HPC)
DecisionSupport
Decision Support
GraphicProcessing
Graphic Processing
I/OThroughput
I/O Throughput
Custom
Custom
XGMIForceLinkWidth (XGMI Force Link Width)
Member of Bios.v1_0_5.Bios
Description
XGMI Force Link Width setting forces the XGMI link width to a value set by the user. Auto will use the system default setting. Other options will force the user setting to be used.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
x4
x4
x8
x8
x16
x16
XGMIMaxLinkWidth (XGMI Max Link Width)
Member of Bios.v1_0_5.Bios
Description
XGMI Max Link Width setting sets the maximum XGMI link width to a value set by the user. Auto will use the system default setting. Other options will force the user setting to be used.
Type
Enumeration
Read Only
False
Value
Description
Auto
Auto
x4
x4
x8
x8
x16
x16
iSCSISoftwareInitiator (iSCSI Software Initiator)
Member of Bios.v1_0_5.Bios
Description
Use this option to enable or disable the iSCSI Software Initiator. When enabled, the system's iSCSI Software Initiator will be used to access iSCSI targets on any configured NIC ports. When disabled, the system's iSCSI Software Initiator will not attempt to access any configured iSCSI targets.