Hpe resource definitions of iLO 6 v1.51


Description	Issuer of the installed CRL, if present.
Type	string or null
Read Only	True
Added	iLO6 1.05

CRLSerial


Description	Serial Number of the installed CRL, if present.
Type	string or null
Read Only	True
Added	iLO6 1.05

CertificateLoginEnabled


Description	Specifies whether Certificate login is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.05

LDAPCertificateNameMapping


Description	The method used to map a certificate to its associated LDAP user account.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`SubjectCN`	The CN portion of the certificate subject will be used as the LDAP username.
`SubjectDN`	The fully qualified DN of the certificate subject will be used as the LDAP username.
`SANRFC822`	The RFC822 name from the certificate's subjectAlternativeName extension will be used as the LDAP username.
`SANUPN`	The UserPrincipalName from the certificate's subjectAlternativeName extension will be used as the LDAP username.

OCSPUri


Description	URL to use for OCSP certificate checking.
Type	string or null
Read Only	False
Added	iLO6 1.05
Format	uri-reference

StrictCACModeEnabled


Description	Whether or not Strict CAC Mode is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.05

Actions

HpeCertAuth.DeleteCRL Member of HpeCertAuth.v1_1_0.HpeCertAuth Remove an installed Certificate Revocation List (CRL).

There are no parameters for this action.

HpeCertAuth.ImportCRL Member of HpeCertAuth.v1_1_0.HpeCertAuth Imports a Certificate Revocation List (CRL).

Parameters:

ImportUri (string)

Contains URI of PEM formatted certificate revocation list (CRL) (Base64 encoded).

HpeCertAuth.ImportCACertificate Member of HpeCertAuth.v1_1_0.HpeCertAuth Imports a Trusted Certificate

Parameters:

Certificate (string)

Contains PEM formatted X509 certificate or PKCS7 certificate chain (Base64 encoded).

HpeCertificate

@odata.type: "#HpeCertificate.v1_0_0.HpeCertificate"

The HpeCertificate resource describes an X509 certificate.

This resource type was added in iLO 5 1.20

Resource Instances

Uri	HTTP Allow
`/redfish/v1/eventservice/cacertificates/{item}`	GET DELETE
`/redfish/v1/managers/{item}/securityservice/certificateauthentication/cacertificates/{item}`	GET DELETE

Issuer


Description	The Certificate Authority that issued the certificate.
Type	string
Read Only	True
Added	iLO6 1.05

SerialNumber


Description	The serial number that the Certificate Authority assigned to the certificate.
Type	string
Read Only	True
Added	iLO6 1.05

Subject


Description	The entity to which the certificate was issued.
Type	string
Read Only	True
Added	iLO6 1.05

ValidNotAfter


Description	The date on which the certificate validity period ends.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

ValidNotBefore


Description	The date on which the certificate validity period begins.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

HpeCertificateCollection

@odata.type: "#HpeCertificateCollection.HpeCertificateCollection"

A Collection of HpeCertificate resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/eventservice/cacertificates`	GET
`/redfish/v1/managers/{item}/securityservice/certificateauthentication/cacertificates`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeCertificate

Members (array)

Member of HpeCertificateCollection.HpeCertificateCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeCertificateCollection.HpeCertificateCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeCertificateCollection.HpeCertificateCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeComponent

@odata.type: "#HpeComponent.v1_0_1.HpeComponent"

The HpeComponent resource describes a software or firmware update component.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/componentrepository/{item}`	GET PATCH DELETE

Activates


Description	Indicates when a component becomes active after being updated.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Immediately`	The update activates immediately.
`AfterReboot`	The update activates after a host server reboot.
`AfterDeviceReset`	The update activates after a device reset.
`AfterHardPowerCycle`	The update activates after a full power supply disconnect or E-Fuse reset.

ComponentType


Description	HTTP-style content-type of binary
Type	string
Read Only	True
Added	iLO6 1.05

ComponentUri


Description	URI of the component binary.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Configuration


Description	string defining customized parameters for some components provided by client at upload time and given to the component at execution time (Type D only).
Type	string
Read Only	False
Added	iLO6 1.05

Created


Description	ISO 8601 time string indicating when this component was added to the NAND.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Optional`
`Recommended`
`Critical`

DeviceClass


Description	Device type GUID from iLO secure flash header
Type	string
Read Only	True
Added	iLO6 1.05

ExecutionParameters


Description	Client supplied execution parameters. These are supplied at upload time and given to the component at execution time (Type D only).
Type	string
Read Only	False
Added	iLO6 1.05

Filename


Description	The unique filename of the component.
Type	string
Read Only	True
Added	iLO6 1.05

Filepath


Description	Path of file on the USB LUN if you mount the repo as USB.
Type	string
Read Only	True
Added	iLO6 1.05

Locked


Description	If true, this component cannot be removed with DELETE because it is referenced by an Install Set
Type	boolean
Read Only	True
Added	iLO6 1.05

SizeBytes


Description	Size of the component file in bytes.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Targets (array)

Targets is an array containing elements of:

Targets[{item}] Member of HpeComponent.v1_0_1.HpeComponent


Description	Target GUIDs from secure flash header or sidecar file.
Type	string
Read Only	True
Added	iLO6 1.05

UpdatableBy (array)

UpdatableBy is an array containing elements of:

UpdatableBy[{item}] Member of HpeComponent.v1_0_1.HpeComponent


Description	Describes which types of update agents may apply this component.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Uefi`	This component may be scheduled for update by UEFI BIOS.
`RuntimeAgent`	This component may be scheduled for update by a runtime update agent such as Smart Update Manager or Smart Update Tool.
`Bmc`	This component may be scheduled for update by iLO.

Version


Description	Version of the component from secure flash header or sidecar file.
Type	string
Read Only	True
Added	iLO6 1.05

HpeComponentCollection

@odata.type: "#HpeComponentCollection.HpeComponentCollection"

A Collection of HpeComponent resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/componentrepository`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeComponent

Members (array)

Member of HpeComponentCollection.HpeComponentCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeComponentCollection.HpeComponentCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeComponentCollection.HpeComponentCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.ComponentCount

Member of HpeComponentCollection.HpeComponentCollection


Description	The number of files reported.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.FreeSizeBytes

Member of HpeComponentCollection.HpeComponentCollection


Description	The available repository space in bytes.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.TotalSizeBytes

Member of HpeComponentCollection.HpeComponentCollection


Description	The total repository size in bytes.
Type	integer or null
Read Only	True
Added	iLO6 1.05

HpeComponentInstallSet

@odata.type: "#HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet"

The HpeComponentInstallSet resource describes an Install Set, an ordered list of installation instructions that may be invoked.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/installsets/{item}`	GET POST PATCH DELETE

Created

Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet


Description	ISO-time of install set creation.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

IsRecovery

Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet


Description	If true, this install set is reserved to hold only critical firmware recovery updatable by iLO. Additionally the 'Administrate Recovery Set' iLO privilege is required to modify or remove this install set.
Type	boolean
Read Only	False
Added	iLO6 1.05

Modified

Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet


Description	ISO-time of install modification.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

Sequence (array)

Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet

Sequence is an array containing elements of:

Sequence[{item}].Command Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet


Description	Command to execute.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ApplyUpdate`	Apply an update using the specified component.
`ResetServer`	Reset the server.
`ResetBmc`	Reset the BMC.
`Wait`	Wait for the WaitTimeSeconds number of seconds.
`BootToUefi`	Boot the server to UEFI shell
`PendingReset`	Reset is pending after bundle update.

Sequence[{item}].Component Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Sequence[{item}].ExecutionTimeoutMinutes Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet


Description	The number of minutes that this update will likely take to apply. Applies if the command is 'ApplyUpdate'. Ignored otherwise.
Type	integer
Read Only	False
Added	iLO6 1.05

Sequence[{item}].Filename Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet


Description	The unique filename of the component. This correlates to 'Filename' in the HpeComponent.
Type	string
Read Only	False
Added	iLO6 1.05

Sequence[{item}].UpdatableBy (array) Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet

UpdatableBy is an array containing elements of:

UpdatableBy[{item}] Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet


Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Bmc`	This component may be scheduled for update by iLO.
`Uefi`	This component may be scheduled for update by UEFI BIOS.
`RuntimeAgent`	This component may be scheduled for update by a runtime update agent such as Smart Update Manager or Smart Update Tool.

Sequence[{item}].WaitTimeSeconds Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet


Description	The number of seconds to pause if the command is 'Wait'. Ignored otherwise.
Type	integer
Read Only	False
Added	iLO6 1.05

Actions

HpeComponentInstallSet.Invoke Member of HpeComponentInstallSet.v1_2_0.HpeComponentInstallSet

Parameters:

ClearTaskQueue (boolean)

Previous items in the task queue can be cleared before the Install Set is invoked

HpeComponentInstallSetCollection

@odata.type: "#HpeComponentInstallSetCollection.HpeComponentInstallSetCollection"

A Collection of HpeComponentInstallSet resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/installsets`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeComponentInstallSet

Members (array)

Member of HpeComponentInstallSetCollection.HpeComponentInstallSetCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeComponentInstallSetCollection.HpeComponentInstallSetCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeComponentInstallSetCollection.HpeComponentInstallSetCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeComponentUpdateTask

@odata.type: "#HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask"

The HpeComponentUpdateTask resource describes an Update Task, an element in the update task queue. This represents an install instruction.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/updatetaskqueue/{item}`	GET PATCH DELETE

Command

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	Command to execute.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ApplyUpdate`	Apply an update using the specified component.
`ResetServer`	Reset the server.
`ResetBmc`	Reset the BMC.
`Wait`	Wait for the WaitTimeSeconds number of seconds.
`PendingReset`	Reset is pending after bundle update.

Component

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Created

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	ISO-time of task creation (by whomever created this thing)
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

ExecutionTimeoutMinutes

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	The number of minutes that this update will likely take to apply. Applies if the command is 'ApplyUpdate'. Ignored otherwise.
Type	integer
Read Only	False
Added	iLO6 1.05

Expire

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	ISO 8601 Redfish-style time string after which we will automatically change state to Expired - null for no expire time
Type	string
Read Only	False
Added	iLO6 1.05
Format	date-time

Filename

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	The unique filename of the component. This correlates to 'Filename' in the HpeComponent.
Type	string
Read Only	False
Added	iLO6 1.05

MaintenanceWindow

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	The maintenance window for this update task.
Type	string or null
Read Only	False
Added	iLO6 1.05

Modified

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	ISO-time of last task queue item update by updater (not client)
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

RecoveryPrivilege

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	This task was created by a user with Recovery Set privilege, and would allow a downgrade if 'DowngradePolicy' is set to 'RecoveryDowngrade'. Applies if the command is 'ApplyUpdate'. Ignored otherwise.
Type	boolean
Read Only	True
Added	iLO6 1.05

Result

Result.MessageArgs (array) Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask

MessageArgs is an array containing elements of:

MessageArgs[{item}] Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Type	string
Read Only	True
Added	iLO6 1.05

Result.MessageId Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	The key for this message that can be used to look up the message in a message registry.
Type	string
Read Only	False
Added	iLO6 1.05

ResultLog

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	base64 encoded entry to capture component log. Estimated to be generally 1-2KB. written by updater
Type	string or null
Read Only	False
Added	iLO6 1.05

StartAfter

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	ISO 8601 Redfish-style time string of earliest execution - null for no start time specified
Type	string
Read Only	False
Added	iLO6 1.05
Format	date-time

State

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	The current state of the update task.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Pending`	The task is pending execution.
`InProgress`	The task is executing.
`Complete`	The task was completed and the results are available in the Results.
`Expired`	The task will not execute because the current time is after the 'Expire' time.
`Exception`	The task was unsuccessful because of an exception condition.
`Canceled`	The task is no longer scheduled to run.

TPMOverride

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	If true then the TPMOverrideFlag is passed in on the associated flash operations.
Type	boolean
Read Only	False
Added	iLO6 1.05

UpdatableBy (array)

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask

UpdatableBy is an array containing elements of:

UpdatableBy[{item}] Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Bmc`	This component may be scheduled for update by iLO.
`Uefi`	This component may be scheduled for update by UEFI BIOS.
`RuntimeAgent`	This component may be scheduled for update by a runtime update agent such as Smart Update Manager or Smart Update Tool.

UpdateRecoverySet

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	Update Recovery Set with this component if the command is 'ApplyUpdate'. Ignored otherwise.
Type	boolean
Read Only	False
Added	iLO6 1.05

WaitTimeSeconds

Member of HpeComponentUpdateTask.v1_3_0.HpeComponentUpdateTask


Description	The number of seconds to pause if the command is 'Wait'. Ignored otherwise.
Type	integer
Read Only	False
Added	iLO6 1.05

HpeComponentUpdateTaskQueueCollection

@odata.type: "#HpeComponentUpdateTaskQueueCollection.HpeComponentUpdateTaskQueueCollection"

A Collection of HpeComponentUpdateTaskQueue resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/updatetaskqueue`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeComponentUpdateTask

Members (array)

Member of HpeComponentUpdateTaskQueueCollection.HpeComponentUpdateTaskQueueCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeComponentUpdateTaskQueueCollection.HpeComponentUpdateTaskQueueCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeComponentUpdateTaskQueueCollection.HpeComponentUpdateTaskQueueCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeDirectoryTest

@odata.type: "#HpeDirectoryTest.v1_0_0.HpeDirectoryTest"

The HpeDirectoryTest resource describes the BMC directory test.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/directorytest`	GET POST

OverallStatus

Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest


Description	Represents the overall status of directory tests.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`NotRun`	The Overall Directory Test was not run.
`InProgress`	The Overall Directory Test is in progress.
`Success`	The Overall Directory Test has completed successfully.
`Warning`	The Overall Directory Test has completed with warning.
`Failed`	The Overall Directory Test has failed.
`Error`	The Directory Test has encountered an error condition.

TestResults (array)

Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest

TestResults is an array containing elements of:

TestResults[{item}].Notes Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest


Description	This provides additional details on the directory test.
Type	string or null
Read Only	True
Added	iLO6 1.05

TestResults[{item}].Status Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest See the Redfish standard schema and specification for information on common Status object.

TestResults[{item}].TestName Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest


Description	The name of directory test.
Type	string
Read Only	True
Added	iLO6 1.05

Actions

HpeDirectoryTest.StartTest Member of HpeDirectoryTest.v1_0_0.HpeDirectoryTest Start the directory test.

Parameters:

HpeESKM

@odata.type: "#HpeESKM.v2_0_0.HpeESKM"

The HpeESKM resource describes properties for managing the ESKM feature. ESKM (Enterprise Security Key Manager) enables connections to an operational key manager,change redundancy settings,view the key manager connection settings,test the connection,and view key management events.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/eskm`	GET POST PATCH

ESKMEvents (array)

Member of HpeESKM.v2_0_0.HpeESKM

ESKMEvents is an array containing elements of:

ESKMEvents[{item}].Event Member of HpeESKM.v2_0_0.HpeESKM


Description	ESKM event description.
Type	string or null
Read Only	True
Added	iLO6 1.05

ESKMEvents[{item}].Timestamp Member of HpeESKM.v2_0_0.HpeESKM


Description	Time of ESKM event.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

KeyManagerConfig

KeyManagerConfig.AccountGroup Member of HpeESKM.v2_0_0.HpeESKM


Description	Account group on ESKM.
Type	string or null
Read Only	False
Added	iLO6 1.05

KeyManagerConfig.AccountName Member of HpeESKM.v2_0_0.HpeESKM


Description	Account name on ESKM.
Type	string
Read Only	True
Added	iLO6 1.05

KeyManagerConfig.ESKMLocalCACertificateName Member of HpeESKM.v2_0_0.HpeESKM


Description	This is the name of Local CA (Certificate Authority) in ESKM that is used to sign the ESKM server certificate. iLO will retrieve this certificate from the ESKM server.
Type	string or null
Read Only	False
Added	iLO6 1.05

KeyManagerConfig.ImportedCertificateIssuer Member of HpeESKM.v2_0_0.HpeESKM


Description	Imported certificate issuer.
Type	string
Read Only	True
Added	iLO6 1.05

KeyManagerConfig.ImportedCertificateSubject Member of HpeESKM.v2_0_0.HpeESKM


Description	Imported certificate subject.
Type	string
Read Only	True
Added	iLO6 1.05

KeyManagerConfig.LoginName Member of HpeESKM.v2_0_0.HpeESKM


Description	ESKM administrator account login name. This property always returns null on GET.
Type	string or null
Read Only	False
Added	iLO6 1.05

KeyManagerConfig.Password Member of HpeESKM.v2_0_0.HpeESKM


Description	ESKM administrator account password. This property always returns null on GET.
Type	string or null
Read Only	False
Added	iLO6 1.05

KeyServerRedundancyReq

Member of HpeESKM.v2_0_0.HpeESKM


Description	If true encryption keys will be maintained on both the configured key servers. When this option is disabled, iLO will not verify that encryption keys are copied to both of the configured key servers.
Type	boolean
Read Only	False
Added	iLO6 1.05

PrimaryKeyServerAddress

Member of HpeESKM.v2_0_0.HpeESKM


Description	Primary key server IP address or FQDN. Set to null to clear the value.
Type	string or null
Read Only	False
Added	iLO6 1.05

PrimaryKeyServerPort

Member of HpeESKM.v2_0_0.HpeESKM


Description	Primary key server port number. Set to null to clear the value.
Type	integer or null
Read Only	False
Added	iLO6 1.05

SecondaryKeyServerAddress

Member of HpeESKM.v2_0_0.HpeESKM


Description	Secondary key server IP address or FQDN. Set to null to clear the value.
Type	string or null
Read Only	False
Added	iLO6 1.05

SecondaryKeyServerPort

Member of HpeESKM.v2_0_0.HpeESKM


Description	Secondary key server port number. Set to null to clear the value.
Type	integer or null
Read Only	False
Added	iLO6 1.05

Actions

HpeESKM.ClearESKMLog Member of HpeESKM.v2_0_0.HpeESKM Clears ESKM log.

There are no parameters for this action.

HpeESKM.TestESKMConnections Member of HpeESKM.v2_0_0.HpeESKM Test ESKM connections.

There are no parameters for this action.

HpeHttpsCert

@odata.type: "#HpeHttpsCert.v2_0_0.HpeHttpsCert"

The HpeHttpsCert resource describes an X509 certificate.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/httpscert`	GET POST DELETE

CertificateSigningRequest

Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	GenerateCSR action, wait few minutes (upto 10), perform GET operation, fills CSR. Contains a public and private key pair.
Type	string or null
Read Only	True
Added	iLO6 1.05

X509CertificateInformation

X509CertificateInformation.Issuer Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The Certificate Authority that issued the certificate.
Type	string
Read Only	True
Added	iLO6 1.05

X509CertificateInformation.SerialNumber Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The serial number that the Certificate Authority assigned to the certificate.
Type	string
Read Only	True
Added	iLO6 1.05

X509CertificateInformation.Subject Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The entity to which the certificate was issued.
Type	string
Read Only	True
Added	iLO6 1.05

X509CertificateInformation.ValidNotAfter Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The date on which the certificate validity period ends.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

X509CertificateInformation.ValidNotBefore Member of HpeHttpsCert.v2_0_0.HpeHttpsCert


Description	The date on which the certificate validity period begins.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Actions

HpeHttpsCert.ImportCertificate Member of HpeHttpsCert.v2_0_0.HpeHttpsCert Imports a Trusted Certificate and iLO is reset.

Parameters:

Certificate (string)

Contains PEM formatted X509 certificate (Base64 encoded).

HpeHttpsCert.GenerateCSR Member of HpeHttpsCert.v2_0_0.HpeHttpsCert

Parameters:

City (string)

The city or locality where the company or organization that owns this iLO subsystem is located.

OrgName (string)

The name of the company or organization that owns this iLO subsystem.

Country (string)

The two-character country code where the company or organization that owns this Manager subsystem is located. Eg: US

CommonName (string)

The FQDN of this iLO subsystem.

IncludeIP (boolean)

Include the IP Addresses in the CSR.

OrgUnit (string)

The unit within the company or organization that owns this iLO subsystem.

State (string)

The state where the company or organization that owns this iLO subsystem is located.

HpeiLOAccountCertificateMap

@odata.type: "#HpeiLOAccountCertificateMap.v1_0_1.HpeiLOAccountCertificateMap"

The HpeiLOAccountCertificateMap resource describes mapping X509 certificates to user accounts.

This resource type was added in iLO 5 1.20

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/usercertificatemapping/{item}`	GET POST DELETE

Fingerprint

Member of HpeiLOAccountCertificateMap.v1_0_1.HpeiLOAccountCertificateMap


Description	The fingerprint which uniquely identifies the mapped certificate.
Type	string
Read Only	False
Added	iLO6 1.05

FingerprintDigestAlgorithm

Member of HpeiLOAccountCertificateMap.v1_0_1.HpeiLOAccountCertificateMap


Description	The algorithm used to calculate the fingerprint.
Type	string
Read Only	False
Added	iLO6 1.05

UserName

Member of HpeiLOAccountCertificateMap.v1_0_1.HpeiLOAccountCertificateMap


Description	The name used to log in to the management processor.
Type	string
Read Only	False
Added	iLO6 1.05

HpeiLOAccountCertificateMapCollection

@odata.type: "#HpeiLOAccountCertificateMapCollection.HpeiLOAccountCertificateMapCollection"

A Collection of HpeiLOAccountCertificateMap resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/usercertificatemapping`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOAccountCertificateMap

Members (array)

Member of HpeiLOAccountCertificateMapCollection.HpeiLOAccountCertificateMapCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOAccountCertificateMapCollection.HpeiLOAccountCertificateMapCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeiLOAccountCertificateMapCollection.HpeiLOAccountCertificateMapCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeiLOActiveHealthSystem

@odata.type: "#HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem"

The HpeiLOActiveHealthSystem resource describes the properties for managing the Active Health System.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/activehealthsystem`	GET POST PATCH

AHSEnabled

Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	Determines whether HPE Active Health System logging is enabled or disabled.
Type	boolean
Read Only	False
Added	iLO6 1.05

AHSFileEnd

Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	The end of the AHS log.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

AHSFileStart

Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	The start of the AHS log.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

AHSStatus

AHSStatus.HardwareEnabled Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	Determines whether HPE Active Health System logging in hardware is enabled or not.
Type	boolean
Read Only	True
Added	iLO6 1.05

AHSStatus.SoftwareEnabled Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	Determines whether HPE Active Health System logging in software is enabled or not.
Type	boolean
Read Only	True
Added	iLO6 1.05

AHSStatus.TemporaryHoldEnabled Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	Determines whether HPE Active Health System logging access is temporarily disabled.
Type	boolean
Read Only	True
Added	iLO6 1.05

LocationParameters

LocationParameters.case_no Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the case number into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&case_no=abc123.
Type	string
Read Only	True
Added	iLO6 1.05

LocationParameters.co_name Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the company name into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&co_name=myCompany.
Type	string
Read Only	True
Added	iLO6 1.05

LocationParameters.contact_name Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the contact name into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&contact_name=JohnDoe.
Type	string
Read Only	True
Added	iLO6 1.05

LocationParameters.days Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter should be used to download the most recent N days of the AHS log. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?days=7. Will retrive logs made within the last 7 days.
Type	string
Read Only	True
Added	iLO6 1.05

LocationParameters.downloadAll Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter should be used to download entire AHS log. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1.
Type	string
Read Only	True
Added	iLO6 1.05

LocationParameters.email Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the contacts email address into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&email=abc@xyz.com.
Type	string
Read Only	True
Added	iLO6 1.05

LocationParameters.from Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter must be added with the 'to' query parameter to the AHS location URI to limit the range of data returned. 'downloadAll' parameter should not be used with this query parameter. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?from=2014-03-01&&to=2014-03-30.
Type	string
Read Only	True
Added	iLO6 1.05

LocationParameters.phone Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter may be added to the AHS location URI to insert the contacts phone number into the AHS log header. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?downloadAll=1&&contact_name=JohnDoe&&phone=555-555-5555.
Type	string
Read Only	True
Added	iLO6 1.05

LocationParameters.to Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem


Description	This query parameter must be added with the 'from' query parameter to the AHS location URI to limit the range of data returned.'downloadAll' parameter should not be used with this query parameter. For example, http://iloname.example.net/ahsdata/HPE_xxxxxxxxxx_20140821.ahs?from=2014-03-01&&to=2014-03-30.
Type	string
Read Only	True
Added	iLO6 1.05

Actions

HpeiLOActiveHealthSystem.LogAmplifierData Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem

Parameters:

iLOAmplifierName (string)

Name of the iLO Amplifier instance that manages this iLO.

iLOAmplifierManagesCount (integer)

Number of iLOs that this Amplifier instance manages.

HpeiLOActiveHealthSystem.CaptureSystemLog Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem There are no parameters for this action.

HpeiLOActiveHealthSystem.LogMilestone Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem

Parameters:

MilestoneDescription (string)

Description of milestone.

MilestoneOrigin (string)

Origin of milestone.

HpeiLOActiveHealthSystem.ClearLog Member of HpeiLOActiveHealthSystem.v2_5_0.HpeiLOActiveHealthSystem There are no parameters for this action.

HpeiLOBackupFile

@odata.type: "#HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile"

The HpeiLOBackupFile resource describes the properties for managing BMC backup files.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/backuprestoreservice/backupfiles/{item}`	GET POST DELETE

Created

Member of HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile


Description	ISO-time of backup file creation (by whomever created this thing)
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

FileSize

Member of HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile


Description	Size of backup file.
Type	integer or null
Read Only	True
Added	iLO6 1.05

FirmwareVersion

Member of HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile


Description	iLO firmware version running when this backup file was created.
Type	string or null
Read Only	True
Added	iLO6 1.05

Actions

HpeiLOBackupFile.Restore Member of HpeiLOBackupFile.v1_0_0.HpeiLOBackupFile There are no parameters for this action.

HpeiLOBackupFileCollection

@odata.type: "#HpeiLOBackupFileCollection.HpeiLOBackupFileCollection"

A Collection of HpeiLOBackupFile resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/backuprestoreservice/backupfiles`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOBackupFile

Members (array)

Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.BackupFileCount

Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection


Description	The number of backup files reported.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.BackupFilesAllowed

Member of HpeiLOBackupFileCollection.HpeiLOBackupFileCollection


Description	The number of backup files supported.
Type	integer or null
Read Only	True
Added	iLO6 1.05

HpeiLOBackupRestoreService

@odata.type: "#HpeiLOBackupRestoreService.v2_2_0.HpeiLOBackupRestoreService"

The HpeiLOBackupRestoreService resource describes the properties for using the BMC backup and restore features.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/backuprestoreservice`	GET PATCH

BackupFileLocation

Member of HpeiLOBackupRestoreService.v2_2_0.HpeiLOBackupRestoreService


Description	The URI to which a client may POST to create and download a file for a subsequent restore operation.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

BackupFiles

Link to backup files. BackupFiles is a link ("@odata.id": URI) to another resource.

CustomBackupandRestore

Member of HpeiLOBackupRestoreService.v2_2_0.HpeiLOBackupRestoreService


Description	This property indicates whether a custom backup and restore is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.10

HttpPushUri

Member of HpeiLOBackupRestoreService.v2_2_0.HpeiLOBackupRestoreService


Description	The URI to which a client may POST a file for a subsequent restore operation.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

HpeiLODateTime

@odata.type: "#HpeiLODateTime.v2_0_0.HpeiLODateTime"

The HpeiLODateTime resource describes the properties for managing the BMC data and time.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/datetime`	GET PATCH

Links to other Resources

Link Name	Destination type
`Links/EthernetNICs`	Collection of EthernetInterface

ConfigurationSettings


Description	The state of the currently displayed configuration settings.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Current`
`SomePendingReset`

DateTime


Description	The date and time used by management processor.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

NTPServers (array)

NTPServers is an array containing elements of:

NTPServers[{item}] Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The current NTP server's IPv4 address, IPv6 address, or FQDN. The value either comes from DHCP or is static depending on the DHCP settings.
Type	string or null
Read Only	True
Added	iLO6 1.05

PropagateTimeToHost


Description	Determines whether the server time is synchronized with the management processor time during the first POST after AC power is applied.
Type	boolean
Read Only	False
Added	iLO6 1.05

StaticNTPServers (array)

StaticNTPServers is an array containing elements of:

StaticNTPServers[{item}] Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The static NTP server's IPv4 address, IPv6 address, or FQDN. To set this property, management processor must not be configured to use NTP servers provided by DHCPv4 or DHCPv6.
Type	string
Read Only	True
Added	iLO6 1.05

TimeZone

TimeZone.Index Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The index of the current time zone. To set a new time zone, specify a different time zone index. This property can be set only when DHCPv4 or DHCPv6 supplied time settings are disabled. Since the time zone list might vary from one firmware version to another (which often leads to differences in time zone indices), setting the time zone by name is recommended over setting by index, for better compatibility.
Type	number
Read Only	False
Added	iLO6 1.05

TimeZone.UtcOffset Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The UTC offset of the current time zone, in the format {+/-}hh:mm
Type	string
Read Only	True
Added	iLO6 1.05

TimeZone.Value Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The environment variable value.
Type	string
Read Only	True
Added	iLO6 1.05

TimeZoneList (array)

TimeZoneList is an array containing elements of:

TimeZoneList[{item}].Index Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The time zone index.
Type	number
Read Only	True
Added	iLO6 1.05

TimeZoneList[{item}].UtcOffset Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The UTC offset of the time zone, in the format {+/-}hh:mm
Type	string
Read Only	True
Added	iLO6 1.05

TimeZoneList[{item}].Value Member of HpeiLODateTime.v2_0_0.HpeiLODateTime


Description	The environment variable value.
Type	string
Read Only	True
Added	iLO6 1.05

HpeiLOEmbeddedMedia

@odata.type: "#HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia"

The HpeiLOEmbeddedMedia resource describes the properties for the embedded media.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/embeddedmedia`	GET

Controller

Controller.Firmware Controller.Firmware.Current Controller.Firmware.Current.VersionString Member of HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia


Description	The current version of the embedded media controller.
Type	string
Read Only	True
Added	iLO6 1.05

Controller.Status Member of HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia See the Redfish standard schema and specification for information on common Status object.

SDCard

SDCard.SizeMB Member of HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia


Description	The size of the SD card present in the server, in MB.
Type	integer
Read Only	True
Added	iLO6 1.05

SDCard.Status Member of HpeiLOEmbeddedMedia.v2_0_0.HpeiLOEmbeddedMedia See the Redfish standard schema and specification for information on common Status object.

HpeiLOFederatedGroupCapping

@odata.type: "#HpeiLOFederatedGroupCapping.v2_0_0.HpeiLOFederatedGroupCapping"

The HpeiLOFederatedGroupCapping resource describes the properties for managing Federated Group Capping.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/federatedgroupcapping`	GET PATCH

CapWatts

Member of HpeiLOFederatedGroupCapping.v2_0_0.HpeiLOFederatedGroupCapping


Description	The configured power cap for all servers in a group. This value is 0 if the power cap is not configured.
Type	integer
Read Only	True
Added	iLO6 1.05

CapacityWatts

Member of HpeiLOFederatedGroupCapping.v2_0_0.HpeiLOFederatedGroupCapping


Description	The total power supply capacity for all servers in a group.
Type	integer
Read Only	True
Added	iLO6 1.05

Groups

Throttle

Member of HpeiLOFederatedGroupCapping.v2_0_0.HpeiLOFederatedGroupCapping


Description	High, Med, or Low based on the percentage of power usage.
Type	string
Read Only	True
Added	iLO6 1.05

HpeiLOFederationGroup

@odata.type: "#HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup"

The HpeiLOFederationGroup resource describes the properties for managing Federation groups.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/federationgroups/{item}`	GET PATCH DELETE

Key

Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	The password used by the Federation Group.
Type	string or null
Read Only	False
Added	iLO6 1.05

Privileges

Privileges.HostBIOSConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Host BIOS configuration privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Privileges.HostNICConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Host NIC configuration privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Privileges.HostStorageConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Host Storage configuration privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Privileges.LoginPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Login privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Privileges.RemoteConsolePriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Remote console privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Privileges.SystemRecoveryConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	System Recovery configuration privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Privileges.UserConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	User configuration privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Privileges.VirtualMediaPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Virtual media privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Privileges.VirtualPowerAndResetPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	Virtual power and reset privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Privileges.iLOConfigPriv Member of HpeiLOFederationGroup.v2_0_0.HpeiLOFederationGroup


Description	The management processor configuration privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

HpeiLOFederationGroupCollection

@odata.type: "#HpeiLOFederationGroupCollection.HpeiLOFederationGroupCollection"

A Collection of HpeiLOFederationGroup resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/federationgroups`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOFederationGroup

Members (array)

Member of HpeiLOFederationGroupCollection.HpeiLOFederationGroupCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOFederationGroupCollection.HpeiLOFederationGroupCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeiLOFederationGroupCollection.HpeiLOFederationGroupCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeiLOFederationPeers

@odata.type: "#HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers"

The HpeiLOFederationPeers resource describes the properties for viewing Federation peers.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/federationpeers/{item}`	GET

Peers (array)

Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers

Peers is an array containing elements of:

Peers[{item}].HttpErrorCode Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	Error code for success or failure.
Type	integer
Read Only	True
Added	iLO6 1.05

Peers[{item}].ManagerIPAddress Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	Manager IP address of the federation peer.
Type	string
Read Only	True
Added	iLO6 1.05

Peers[{item}].Time Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	Time when the federation peer was added.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Peers[{item}].URL Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	URL of the federation peer.
Type	string
Read Only	True
Added	iLO6 1.05
Format	url

Peers[{item}].UUID Member of HpeiLOFederationPeers.v2_0_0.HpeiLOFederationPeers


Description	UUID peers that are part of the federation group.
Type	string
Read Only	True
Added	iLO6 1.05

HpeiLOFederationPeersCollection

@odata.type: "#HpeiLOFederationPeersCollection.HpeiLOFederationPeersCollection"

A Collection of HpeiLOFederationPeers resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/federationpeers`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOFederationPeers

Members (array)

Member of HpeiLOFederationPeersCollection.HpeiLOFederationPeersCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOFederationPeersCollection.HpeiLOFederationPeersCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeiLOFederationPeersCollection.HpeiLOFederationPeersCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeiLOFrus

@odata.type: "#HpeiLOFrus.v2_0_0.HpeiLOFrus"

The HpeiLOFrus resource describes features of add-in adapters.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/basefrus/{item}`	GET
`/redfish/v1/chassis/{item}/basefrus/{item}/details`	GET
`/redfish/v1/chassis/{item}/mezzfrus/{item}`	GET
`/redfish/v1/chassis/{item}/mezzfrus/{item}/details`	GET

FRU


Description	The typename this FRU describes.
Type	string
Read Only	True
Added	iLO6 1.05

FRULink


Description	The aggregation of the Link signals for all ports on the FRU card.
Type	boolean
Read Only	True
Added	iLO6 1.05

FRUType


Description	The type of FRU that is installed, i.e. Base or Mezzanine FRU.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Base`
`Mezzanine`

Interlocked


Description	Indicates if a PCIe card is installed in slot.
Type	boolean
Read Only	True
Added	iLO6 1.05

Location


Description	The location where the FRU resides.
Type	string
Read Only	True
Added	iLO6 1.05

PGood


Description	The Power Good status.
Type	boolean
Read Only	True
Added	iLO6 1.05

PhysicalSlot


Description	The physical slot in which this FRU resides. 0 is for Base FRU, 1-N is for Mezzanine FRUs
Type	integer
Read Only	True
Added	iLO6 1.05

Seated


Description	Indicates if the Base FRU is properly seated in the slot.
Type	boolean
Read Only	True
Added	iLO6 1.05

SerialNumber


Description	The system's serial number.
Type	string
Read Only	True
Added	iLO6 1.05

UEFIDeviceName


Description	The Device Name in UTF-8 format.
Type	string
Read Only	True
Added	iLO6 1.05

UEFIDevicePaths (array)

UEFIDevicePaths is an array containing elements of:

UEFIDevicePaths[{item}] Member of HpeiLOFrus.v2_0_0.HpeiLOFrus


Type	string
Read Only	True
Added	iLO6 1.05

HpeiLOFrusCollection

@odata.type: "#HpeiLOFrusCollection.HpeiLOFrusCollection"

A Collection of HpeiLOFrus resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/basefrus`	GET
`/redfish/v1/chassis/{item}/mezzfrus`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOFrus

Members (array)

Member of HpeiLOFrusCollection.HpeiLOFrusCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOFrusCollection.HpeiLOFrusCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeiLOFrusCollection.HpeiLOFrusCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeiLOLicense

@odata.type: "#HpeiLOLicense.v2_3_0.HpeiLOLicense"

The HpeiLOLicense resource describes the properties for managing BMC licenses.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/licenseservice/{item}`	GET DELETE

Confirmation

Confirmation.Code Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Confirmation service response code.
Type	string
Read Only	True
Added	iLO6 1.05

Confirmation.Message Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	User-friendly confirmation information for the current managment processor license.
Type	string
Read Only	True
Added	iLO6 1.05

Confirmation.Service Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Confirmation service URI.
Type	string
Read Only	True
Added	iLO6 1.05

Confirmation.Status Member of HpeiLOLicense.v2_3_0.HpeiLOLicense See the Redfish standard schema and specification for information on common Status object.

ConfirmationRequest

ConfirmationRequest.EON ConfirmationRequest.EON.License Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	The current license of this management processor.
Type	string
Read Only	True
Added	iLO6 1.05

ConfirmationRequest.EON.LicenseKey Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	The license key installed on this management processor.
Type	string
Read Only	True
Added	iLO6 1.05

ConfirmationRequest.EON.Quantity Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	The number of entitlements licensed.
Type	integer
Read Only	True
Added	iLO6 1.05

ConfirmationRequest.EON.State Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	The current licensing state and behavior of the management processor. This is affected by license installation, activation and confirmation.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`unlicensed`	standard baseline functionality
`evaluation`	evaluation / demonstration temporary licensed functionality
`nfr`	not for resale experimental functionality
`expired`	standard baseline functionality and evaluation licenses no longer accepted
`unconfirmed`	licensed functionality that has not been confirmed
`timeout`	licensed functionality is disabled until the license is confirmed
`confirmed`	licensed functionality has been confirmed for use
`static`	system has active built-in licensed functionality that does not require confirmation
`err`	error

ConfirmationRequest.Signer Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Source of confirmation request.
Type	string
Read Only	True
Added	iLO6 1.05

ConfirmationRequest.System ConfirmationRequest.System.ChipId Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Management processor unique chip identifier.
Type	string
Read Only	True
Added	iLO6 1.05

ConfirmationRequest.System.Product Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	System housing management processor.
Type	string
Read Only	True
Added	iLO6 1.05

ConfirmationRequest.System.SerialNumber Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	System serial number.
Type	string
Read Only	True
Added	iLO6 1.05

License


Description	The current license of this management processor.
Type	string
Read Only	True
Added	iLO6 1.05

LicenseClass


Description	The class of current license on this management processor.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`FQL`
`BETA`
`EVALUATION`
`AKA`
`DL`
`FFQL`
`SL`
`SITE`
`EVAL`
`MLA`

LicenseErr


Description	Error information from the most recent attempt to alter the installed management processor license.
Type	string
Read Only	True
Added	iLO6 1.05

LicenseExpire


Description	User-friendly expiration information of the installed management processor license. For example, for demo license, Evaluation period 2 months 5 days 6 hours remain.
Type	string
Read Only	True
Added	iLO6 1.05

LicenseFeatures

LicenseFeatures.AutoCertEnroll Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Automatic Certificate Enrollment.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.DirectoryAuth Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Directory integrated authentication.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.DowngradePolicy Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Firmware downgrade policy setting.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.EmailAlert Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Email based alerting.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.FWScan Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Runtime FW Integrity check.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.Federation Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Distributed peer to peer management.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.Jitter Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Jitter Control.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.KD Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Kernel Debugging (VSP raw mode).
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.KeyMgr Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Store and retrieve keys from an external key manager.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.MURC Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Shared Multi-User Remote Console.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.ODIM Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Open Distributed Infrastructure Management.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.PowerReg Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Power Regulator.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.RC Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Graphical Remote Console.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.Recovery Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	OS Recovery Event.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.RemoteSyslog Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Remote Syslog.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.Scrncap Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Video Capture.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.SecureErase Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Secure Erase of embedded media.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.SmartCard Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	2-Factor Authentication (Smart Card).
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.SuiteB Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	SuiteB/CNSA mode support.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.TextCons Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Text Console.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.VM Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Remote Console based Virtual Media.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.VMScript Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Scripted Virtual Media.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseFeatures.VSPLogging Member of HpeiLOLicense.v2_3_0.HpeiLOLicense


Description	Virtual Serial Port Logging and Playback.
Type	boolean
Read Only	True
Added	iLO6 1.05

LicenseInstallDate


Description	User-friendly installation date information of the installed management processor license. For example, 19 May 2017
Type	string
Read Only	True
Added	iLO6 1.05

LicenseKey


Description	User-visible license key installed on this management processor. License keys are 25 or 29 characters and contain letters, numbers and hypens. Use POST method to collection of membertype HpeiLOLicense to install / update the license.
Type	string
Read Only	True
Added	iLO6 1.05

LicenseSeats


Description	The number of systems authorized to use this activation key.
Type	integer
Read Only	True
Added	iLO6 1.05

LicenseTier


Description	The licensed feature-set of the management processor.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`STD`
`BLSTD`
`ADV`
`BLADV`
`ESS`
`SCALEOUT`
`APSE`

LicenseType


Description	The type of current license activation on this management processor.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Unlicensed`
`Evaluation`
`Perpetual`
`Subscription`
`Internal`
`Duration`
`Expired`

HpeiLOLicenseCollection

@odata.type: "#HpeiLOLicenseCollection.HpeiLOLicenseCollection"

A Collection of HpeiLOLicense resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/licenseservice`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOLicense

Members (array)

Member of HpeiLOLicenseCollection.HpeiLOLicenseCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOLicenseCollection.HpeiLOLicenseCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeiLOLicenseCollection.HpeiLOLicenseCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeiLOResourceDirectory

@odata.type: "#HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory"

The HpeiLOResourceDirectory resource describes the resource directory. The resource directory is a selected set of resources and resource types for faster access to resources.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/resourcedirectory`	GET

Instances (array)

Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory

Instances is an array containing elements of:

Instances[{item}].@odata.id Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Instances[{item}].@odata.type Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory


Type	string
Read Only	True
Added	iLO6 1.05

Instances[{item}].ETag Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory


Description	This is the last known etag of the resource. The property is omitted if not known.
Type	string
Read Only	True
Added	iLO6 1.05

Instances[{item}].HttpMethods (array) Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory

HttpMethods is an array containing elements of:

HttpMethods[{item}] Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`GET`
`HEAD`
`POST`
`PUT`
`PATCH`
`DELETE`

Instances[{item}].MemberType Member of HpeiLOResourceDirectory.v2_0_0.HpeiLOResourceDirectory


Description	This property has the type of members for collection resources.
Type	string
Read Only	True
Added	iLO6 1.05

HpeiLOSecurityDashboard

@odata.type: "#HpeiLOSecurityDashboard.v1_0_0.HpeiLOSecurityDashboard"

The HpeiLOSecurityDashboard resource describes the BMC security dashboard.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/securitydashboard`	GET

Links to other Resources

Link Name	Destination type
`SecurityParameters`	HpeiLOSecurityParam

OverallSecurityStatus

Member of HpeiLOSecurityDashboard.v1_0_0.HpeiLOSecurityDashboard


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Ok`	The Overall security state of the system is OK.
`Risk`	The Overall security state of the system is Risk.
`Ignored`	The user has ignored (or suppressed) the risk on all the security parameters (whose Status value is Risk).

SecurityParameters

This property references a resource of type Collection with a MemberType of HpeiLOSecurityParam. SecurityParameters is a link ("@odata.id": URI) to another resource.

ServerConfigurationLockStatus

Member of HpeiLOSecurityDashboard.v1_0_0.HpeiLOSecurityDashboard


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	Server Configuration Lock is Enabled.
`Disabled`	Server Configuration Lock is Disabled.

HpeiLOSecurityParam

@odata.type: "#HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam"

The HpeiLOSecurityParam resource describes the properties for BMC security dashboard parameters.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/securitydashboard/securityparams/{item}`	GET PATCH

Ignore

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This indicates if the security status of the security parameter is set to ignored or not.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

IgnoredBy

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents the user who changed the value of Ignore.
Type	string
Read Only	True
Added	iLO6 1.05

IgnoredTime

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents the time when the risk configuration was suppressed.
Type	string
Read Only	True
Added	iLO6 1.05

RecommendedAction

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents the recommended action.
Type	string
Read Only	True
Added	iLO6 1.05

SecurityStatus

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents if the status of the security parameter.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Risk`	This indicates a security issue associated with the security parameter.
`Ok`	This indicates no security issue associated with the security parameter.

State

Member of HpeiLOSecurityParam.v1_1_0.HpeiLOSecurityParam


Description	This represents the state or value of the security parameter.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`On`	The state of the Security Parameter is On.
`Off`	The state of the Security Parameter is Off.
`Enabled`	The state of the Security Parameter is Enabled.
`Disabled`	The state of the Security Parameter is Disabled.
`Failed`	The status of the Security Parameter or the result of an operation represented by the Security Parameter is Failed.
`Ok`	The status of the Security Parameter or the result of an operation represented by the Security Parameter is Ok.
`Insufficient`	The value of the Security Parameter is Insufficient or less than the default value.
`Repaired`	The state of the Security Parameter is Repaired.
`True`	The state of the Security Parameter is True.
`False`	The state of the Security Parameter is False.

HpeiLOSecurityParamCollection

@odata.type: "#HpeiLOSecurityParamCollection.HpeiLOSecurityParamCollection"

A Collection of HpeiLOSecurityParam resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/securitydashboard/securityparams`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeiLOSecurityParam

Members (array)

Member of HpeiLOSecurityParamCollection.HpeiLOSecurityParamCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeiLOSecurityParamCollection.HpeiLOSecurityParamCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeiLOSecurityParamCollection.HpeiLOSecurityParamCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeiLOSnmpService

@odata.type: "#HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService"

The HpeiLOSnmpService resource describes the properties for managing the SNMP configuration of the BMC.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice`	GET POST PATCH

Links to other Resources

Link Name	Destination type
`SNMPUsers`	Collection of HpeSNMPUser
`SNMPAlertDestinations`	Collection of HpeSNMPAlertDestination

AlertDestinationAssociations (array)

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService

AlertDestinationAssociations is an array containing elements of:

AlertDestinationAssociations[{item}].SNMPAlertProtocol Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Indicate the SNMP protocol associated with the AlertDestination.
Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`SNMPv1Trap`	Indicate SNMPv1 trap is enabled for the destination.
`SNMPv3Trap`	Indicate SNMPv3 trap is enabled for the destination. Needs to fill the SecurityName as well.
`SNMPv3Inform`	Indicate SNMPv3 Inform is enabled for the destination. Needs to fill the SecurityName as well.
`Null`	A value is temporarily unavailable

AlertDestinationAssociations[{item}].SecurityName Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Provides the SNMPv3 security name associated with the destination when SNMP alert protocol is SNMPv3 trap or inform.
Type	string or null
Read Only	False
Added	iLO6 1.05

AlertDestinations (array)

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService

AlertDestinations is an array containing elements of:

AlertDestinations[{item}] Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Type	string or null
Read Only	True
Added	iLO6 1.05

AlertsEnabled

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	The alert conditions that the management processor detects independently of the host operating system can be sent to specified SNMP alert destinations. Indicates if the SNMPv1 Trap or SNMPv3 Trap is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.05

Contact

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	The string of up to 49 characters that specifies the system administrator or server owner. The string can include a name, email address, or phone number.
Type	string or null
Read Only	False
Added	iLO6 1.05

Location

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	The string of up to 49 characters that specifies the physical location of the server.
Type	string or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.SNMPColdStartTrapBroadcast

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	If set to true, the Cold Start Trap will be enabled. The Cold Start Trap is broadcast to a subnet broadcast address if there are no trap destinations configured in the SNMP Alert Destination(s) boxes.
Type	boolean
Read Only	False
Added	iLO6 1.05

PeriodicHSATrapConfig

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	If there are any component in health status array(HSA) Trap are in degraded or failed condition then HSA trap will be sent periodically till the component status becomes ok or fine condition. This setting is disabled by default.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value
`Disabled`
`Daily`
`Weekly`
`Monthly`

ReadCommunities (array)

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService

ReadCommunities is an array containing elements of:

ReadCommunities[{item}] Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Type	string
Read Only	True
Added	iLO6 1.05

Role

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	The string of up to 64 characters that describes the server role or function.
Type	string or null
Read Only	False
Added	iLO6 1.05

RoleDetail

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	The string of up to 512 characters that describes specific tasks that the server might perform.
Type	string or null
Read Only	False
Added	iLO6 1.05

SNMPAlertDestinations

SNMP Alert Destination details. SNMPAlertDestinations is a link ("@odata.id": URI) to another resource.

SNMPUsers

SNMPv3 User details. SNMPUsers is a link ("@odata.id": URI) to another resource.

SNMPv1Enabled

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Indicates if the SNMPv1 Query or SNMPv1 Trap is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.05

SNMPv1RequestsEnabled

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Indicates if the SNMPv1 Query is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.40

SNMPv1TrapEnabled

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Indicates if the SNMPv1 Trap is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.40

SNMPv1Traps

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	When enabled, SNMPv1 traps are sent to the remote management systems configured in the SNMP Alert Destination(s) boxes.
Type	boolean
Read Only	False
Added	iLO6 1.05

SNMPv3EngineID

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	The SNMPv3 Engine ID is the unique identifier of an SNMP engine that belongs to an SNMP agent entity. This value must be a hexadecimal string with an even number of 6 to 32 characters, excluding the first two characters, 0x (for example, 0x01020304abcdef).
Type	string or null
Read Only	False
Added	iLO6 1.05

SNMPv3InformRetryAttempt

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Specifies the number of retries to be used in SNMPv3 inform.
Type	integer
Read Only	False
Added	iLO6 1.05

SNMPv3InformRetryIntervalSeconds

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Specifies the interval in seconds between SNMPv3 inform retries.
Type	integer
Read Only	False
Added	iLO6 1.05

SNMPv3RequestsEnabled

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Indicates if the SNMPv3 Query is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.40

SNMPv3TrapEnabled

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Indicates if the SNMPv3 Trap is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.40

Status

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService See the Redfish standard schema and specification for information on common Status object.

TrapCommunities (array)

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService

TrapCommunities is an array containing elements of:

TrapCommunities[{item}] Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Type	string
Read Only	True
Added	iLO6 1.05

TrapSourceHostname

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Determines the host name that is used in the SNMP-defined sysName variable when the management processor generates SNMP traps.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value
`Manager`
`System`

Users (array)

Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService

Users is an array containing elements of:

Users[{item}].AuthPassphrase Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Sets the passphrase to use for sign operations. Enter a value of 8 to 49 characters.
Type	string or null
Read Only	False
Added	iLO6 1.05

Users[{item}].AuthProtocol Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Sets the message digest algorithm to use for encoding the authorization passphrase. The message digest is calculated over an appropriate portion of an SNMP message, and is included as part of the message sent to the recipient. Select MD5 (Message Digest) or SHA (Secure Hash Algorithm).
Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`MD5`	Indicate Message Digest Algorithm.
`SHA`	Indicate Secure Hash Algorithm.
`SHA256`	Indicate SHA256 Algorithm.
`Null`	A value is temporarily unavailable

Users[{item}].PrivacyPassphrase Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Sets the passphrase to use for encrypt operations. Enter a value of 8 to 49 characters.
Type	string or null
Read Only	False
Added	iLO6 1.05

Users[{item}].PrivacyProtocol Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	Sets the encryption algorithm to use for encoding the privacy passphrase. A portion of an SNMP message is encrypted before transmission. Select AES (Advanced Encryption Standard) or DES (Data Encryption Standard).
Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`AES`	Indicate Advanced Encryption Standard Algorithm.
`DES`	Indicate Data Encryption Standard Algorithm.
`Null`	A value is temporarily unavailable

Users[{item}].SecurityName Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	The user profile name. Enter an alphanumeric string of 1 to 32 characters.
Type	string or null
Read Only	False
Added	iLO6 1.05

Users[{item}].UserEngineID Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService


Description	The UserEngineID is combined with the SecurityName to create a SNMPv3 user for each manager. It is only used for creating remote accounts used with INFORM messages. If this property is not set then INFORM message will be sent with default or iLO configured engine ID. This value must be a hexadecimal string with an even number of 10 to 64 characters, excluding the first two characters, 0x (for example, 0x01020304abcdef).
Type	string or null
Read Only	False
Added	iLO6 1.05

Actions

HpeiLOSnmpService.SendSNMPTestAlert Member of HpeiLOSnmpService.v2_4_0.HpeiLOSnmpService There are no parameters for this action.

HpeiLOSSO

@odata.type: "#HpeiLOSSO.v2_0_0.HpeiLOSSO"

The HpeiLOSSO resource describes the configuration of the HPE BMC single-sign-on trusted server feature.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice/sso`	GET POST PATCH

ManagerTrustedCertificates (array)

Member of HpeiLOSSO.v2_0_0.HpeiLOSSO

ManagerTrustedCertificates is an array containing elements of:

ManagerTrustedCertificates[{item}].@odata.id Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

ManagerTrustedCertificates[{item}].@odata.type Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Type	string
Read Only	True
Added	iLO6 1.05

ManagerTrustedCertificates[{item}].Certificate Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Contains PEM formatted X509 certificate (Base64 encoded).
Type	string or null
Read Only	True
Added	iLO6 1.05

ManagerTrustedCertificates[{item}].CertificateDetails ManagerTrustedCertificates[{item}].CertificateDetails.Issuer Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The Certificate Authority that issued the certificate.
Type	string
Read Only	True
Added	iLO6 1.05

ManagerTrustedCertificates[{item}].CertificateDetails.Subject Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The entity to which the certificate was issued.
Type	string
Read Only	True
Added	iLO6 1.05

ManagerTrustedCertificates[{item}].CertificateDetails.ValidNotAfter Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The date on which the certificate validity period ends.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

ManagerTrustedCertificates[{item}].CertificateDetails.ValidNotBefore Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The date on which the certificate validity period begins.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

ManagerTrustedCertificates[{item}].RecordType Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Specifies the type of SSO record imported.
Type	string
Read Only	true
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Certificate`	It is a PEM formatted X509 certificate (Base64 encoded).
`DNSName`	It is a DNS name or an IP address of the HPE SSO-compliant application.

ManagerTrustedCertificates[{item}].SerialNumber Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Contains the Serial number for the SSO records.
Type	integer
Read Only	True
Added	iLO6 1.05

ManagerTrustedCertificates[{item}].ServerName Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	The Server name (or certificate subject).
Type	string or null
Read Only	True
Added	iLO6 1.05

ManagerTrustedCertificates[{item}].Status Member of HpeiLOSSO.v2_0_0.HpeiLOSSO See the Redfish standard schema and specification for information on common Status object.

SSOsettings

SSOsettings.AdminPrivilege SSOsettings.AdminPrivilege.HostBIOSConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host BIOS Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.AdminPrivilege.HostNICConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host NIC Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.AdminPrivilege.HostStorageConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host Storage Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.AdminPrivilege.LoginPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Login Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.AdminPrivilege.RemoteConsolePriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Remote Console Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.AdminPrivilege.SystemRecoveryConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	System Recovery Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.AdminPrivilege.UserConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	User Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.AdminPrivilege.VirtualMediaPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Virtual Media Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.AdminPrivilege.VirtualPowerAndResetPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Power and Reset Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.AdminPrivilege.iLOConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	iLO Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege SSOsettings.OperatorPrivilege.HostBIOSConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host BIOS Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege.HostNICConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host NIC Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege.HostStorageConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host Storage Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege.LoginPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Login Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege.RemoteConsolePriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Remote Console Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege.SystemRecoveryConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	System Recovery Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege.UserConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	User Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege.VirtualMediaPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Virtual Media Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege.VirtualPowerAndResetPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Power and Reset Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.OperatorPrivilege.iLOConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	iLO Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.SSOTrustMode Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Represents the SSO Trust Mode.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`TrustNone`	Rejects all SSO connection request.
`TrustAll`	Accepts any SSO connection initiated from any HPE SSO compliant application.
`TrustbyName`	Enables SSO connections from an HPE SSO compliant application by matching a directly imported IP address or DNS name.
`TrustbyCert`	Enables SSO connections from an HPE SSO compliant application by matching a certificate previously imported to iLO.

SSOsettings.UserPrivilege SSOsettings.UserPrivilege.HostBIOSConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host BIOS Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.UserPrivilege.HostNICConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host NIC Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.UserPrivilege.HostStorageConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Host Storage Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.UserPrivilege.LoginPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Login Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.UserPrivilege.RemoteConsolePriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Remote Console Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.UserPrivilege.SystemRecoveryConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	System Recovery Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.UserPrivilege.UserConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	User Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.UserPrivilege.VirtualMediaPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Virtual Media Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.UserPrivilege.VirtualPowerAndResetPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	Power and Reset Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

SSOsettings.UserPrivilege.iLOConfigPriv Member of HpeiLOSSO.v2_0_0.HpeiLOSSO


Description	iLO Configuration Privileges.
Type	boolean
Read Only	False
Added	iLO6 1.05

Actions

HpeiLOSSO.ImportDNSName Member of HpeiLOSSO.v2_0_0.HpeiLOSSO Add DNS Name to the record list.

Parameters:

DNSName (string)

DNS Name of the HPE SSO Trusted Server.

HpeiLOSSO.ImportCertificate Member of HpeiLOSSO.v2_0_0.HpeiLOSSO Import the HPE SSO Certificate.

Parameters:

CertInput (string)

PEM formatted X509 certificate (Base64 encoded)/DNS name or IP address to import the certificate.

CertType (string)

Specifies the type of certificate imported.

Value	Description
ImportCertUri	iLO imports the certificate from the HPE SSO compliant application over the network.
DirectImportCert	iLO directly imports the Certificate.

HpeiLOSSO.DeleteSSORecordbyNumber Member of HpeiLOSSO.v2_0_0.HpeiLOSSO Delete SSO record by record number.

Parameters:

RecordNumber (integer)

Index of the SSO record to be deleted.

HpeiLOSSO.DeleteAllSSORecords Member of HpeiLOSSO.v2_0_0.HpeiLOSSO Delete all the SSO records.

There are no parameters for this action.

HpeInvalidImage

@odata.type: "#HpeInvalidImage.v1_0_0.HpeInvalidImage"

The HpeInvalidImage resource describes the properties of an invalid firmware image detected and preserved from a computer system.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/invalidimagerepository/{item}`	GET POST PATCH DELETE

Created


Description	ISO 8601 time string indicating when this image was added to the NAND.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

DeviceClass


Description	Device type GUID from iLO secure flash header
Type	string
Read Only	True
Added	iLO6 1.05

Filename


Description	The unique filename of the image.
Type	string
Read Only	True
Added	iLO6 1.05

Filepath


Description	Path of file on the USB LUN if the repo is mounted as USB.
Type	string
Read Only	True
Added	iLO6 1.05

ImageUri


Description	URI of the image binary.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

SizeBytes


Description	Size of the image file in bytes.
Type	integer or null
Read Only	True
Added	iLO6 1.05

HpeInvalidImageCollection

@odata.type: "#HpeInvalidImageCollection.HpeInvalidImageCollection"

A Collection of HpeInvalidImage resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/invalidimagerepository`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeInvalidImage

Members (array)

Member of HpeInvalidImageCollection.HpeInvalidImageCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeInvalidImageCollection.HpeInvalidImageCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeInvalidImageCollection.HpeInvalidImageCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeiSCSISoftwareInitiator

@odata.type: "#HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator"

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/bios/iscsi`	GET
`/redfish/v1/systems/{item}/bios/iscsi/settings`	GET PATCH

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeiSCSISoftwareInitiator
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator See the Redfish standard schema and specification for information on common @Redfish properties.

iSCSIInitiatorName

Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The worldwide unique iSCSI Qualified Name (IQN) of this iSCSI Initiator. Only IQN format is accepted. EUI format is not supported (for example, 'iqn.1986-03.com.hp:init.sn-123456').
Type	string
Read Only	True
Added	iLO6 1.05

iSCSINicSources (array)

Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator

iSCSINicSources is an array containing elements of:

iSCSINicSources[{item}] Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The BIOS Attribute that describes a NIC instance that can be used as a target for iSCSI configuration.
Type	string
Read Only	True
Added	iLO6 1.05

iSCSISources (array)

Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator

iSCSISources is an array containing elements of:

iSCSISources[{item}].StructuredBootString Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Identifies this iSCSI option within the server.
Type	string or null
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].UEFIDevicePath Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Standardized text representation of the UEFI device path for this option, in UTF-8 format.
Type	string or null
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIAttemptInstance Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Uniquely identifies this iSCSI attempt within iSCSISources array. If set to zero, all other properties in the boot option object are ignored (which will delete an existing boot attempt).
Type	integer
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIAttemptName Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Human readable descriptive name for this iSCSI attempt configuration
Type	string or null
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIAuthenticationMethod Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI connection authentication method.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`None`	No iSCSI connection security.
`CHAP`	iSCSI connection is secured using Challenge Handshake Authentication Protocol (CHAP).

iSCSISources[{item}].iSCSIChapSecret Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The password needed for CHAP authentication. This is applicable only when the Authentication Method is set to CHAP, and the CHAP Type is set to Mutual.
Type	string or null
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIChapType Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The CHAP authentication type. This is applicable only when the Authentication Method is set to CHAP.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`OneWay`	The target will authenticate the initiator. .
`Mutual`	both the initiator and target will authenticate each other.

iSCSISources[{item}].iSCSIChapUsername Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The user name needed for CHAP authentication. This is applicable only when the Authentication Method is set to CHAP.
Type	string or null
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIConnectRetry Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The number of times to retry the iSCSI connection. Zero means no retries.
Type	integer
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIConnectTimeoutMS Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI connection timeout value in milliseconds.
Type	integer
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIConnection Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	Enables or Disables iSCSI mode for a selected iSCSI attempt.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Connecting to this iSCSI attempt is disabled.
`Enabled`	Connecting to this iSCSI attempt is enabled.
`EnabledMpio`	Connecting to this iSCSI attempt is enabled with MPIO (Multi Path I/O).

iSCSISources[{item}].iSCSIInitiatorGateway Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The gateway address of the iSCSI Initiator, if not configured via DHCP. The address must be an IPv4 or IPv6 address, depending on the IP Address Type.
Type	string
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIInitiatorInfoViaDHCP Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	If enabled, the iSCSI Initiator information is configured from DHCP. Otherwise, the iSCSI initiator information must be statically configured. When providing static values for the Initiator, ensure Target settings are also configured with static values.
Type	boolean
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIInitiatorIpAddress Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The IP Address of the iSCSI Initiator, if not configured via DHCP. The Initiator IP Address is always auto-assigned if IP address type is IPv6. The address must be an IPv4 or IPv6 address, depending on the IP Address Type.
Type	string
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIInitiatorNetmask Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The subnet mask of the iSCSI Initiator, if not configured via DHCP. The address must be an IPv4.
Type	string
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIIpAddressType Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI IP Address type. If set to Auto, IPv4 will be attempted first, followed by IPv6.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`IPv4`	The iSCSI IP address is configured in IPv4 format.
`IPv6`	The iSCSI IP address is configured in IPv6 format.
`Auto`	The iSCSI IP address is configured in IPv4. If an issue occurs with IPv4, then the IPv6 configuration is used.

iSCSISources[{item}].iSCSILUN Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI target Logical Unit Number (LUN), if not obtained from DHCP. This value must follow the SAM-2 spec. E.g. 0001-1234-5678-9ABC. If the digit number is less then 5 characters, a dash character is not required. E.g. 0001. If the lun number is 12345, input 1234-5
Type	string
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSINicSource Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	A BIOS Attribute that describes this selected NIC instance. This must match one of the possible values listed in the iSCSINicSources array.
Type	string or null
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIReverseChapSecret Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The password needed for reverse CHAP authentication (from the target to the initiator). This is applicable only when the Authentication Method is set to CHAP, and the CHAP Type is set to Mutual.
Type	string or null
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSIReverseChapUsername Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	User Name for reverse CHAP authentication (from the target to the initiator). This is applicable only when the Authentication Method is set to CHAP, and the CHAP Type is set to Mutual.
Type	string or null
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSITargetInfoViaDHCP Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	If enabled, the iSCSI target information are configured from DHCP. Otherwise, the iSCSI target information must be statically configured.
Type	boolean
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSITargetIpAddress Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The IP Address of the iSCSI Target, if not obtained from DHCP. The address must be an IPv4 or IPv6 address, depending on the IP Address Type.
Type	string
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSITargetName Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The worldwide unique iSCSI Qualified Name (IQN) of this iSCSI target. Only the IQN format is accepted. EUI format is not supported (for example, 'iqn.1991-05.com.microsoft:iscsitarget-iscsidisk-target').
Type	string or null
Read Only	True
Added	iLO6 1.05

iSCSISources[{item}].iSCSITargetTcpPort Member of HpeiSCSISoftwareInitiator.v2_0_0.HpeiSCSISoftwareInitiator


Description	The iSCSI Target TCP Port number, if not obtained from DHCP.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeKmsConfig

@odata.type: "#HpeKmsConfig.v1_0_0.HpeKmsConfig"

The schema definition for Key Management Service configuration.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/Systems/{item}/Bios/Kmsconfig/Settings`	GET PATCH
`/redfish/v1/systems/{item}/bios/Kmsconfig`	GET

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeKmsConfig
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeKmsConfig.v1_0_0.HpeKmsConfig See the Redfish standard schema and specification for information on common @Redfish properties.

DeleteUnusedEncryptionKeys


Description	Removes unused encryption keys.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Do not removed unused encryption keys.
`Enabled`	Remove unused encryption keys.

EncryptableDevices (array)

EncryptableDevices is an array containing elements of:

EncryptableDevices[{item}].DeviceName Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Name of the encryptable device.
Type	string
Read Only	True
Added	iLO6 1.05

EncryptableDevices[{item}].EncryptionAction Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Devices can take two types of action for encrypting namely, enable and disable. If user would like to modify the Passphrase, then User can opt to change encryption
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enable`	Enable Encryption for the device.
`Disable`	Disable Encryption for the device.
`Change`	Modify the Encryption Passphrase.
`Unlock`	Unlock the Encrypted device.
`Undefined`	Encryption action is Undefined.

EncryptableDevices[{item}].EncryptionPhrase Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Encryption Passphrase would show up if the device is encrypted and be modified as well.
Type	string or null
Read Only	False
Added	iLO6 1.05

EncryptableDevices[{item}].EncryptionStatus Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Encryption status of the device.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`EncryptionStatusUnknown`	Device is encrypted, but Passphrase is unknown.
`Encrypted`	Device is Encrypted.
`Decrypted`	Device is Unencrypted.

EncryptableDevices[{item}].PassphraseType Member of HpeKmsConfig.v1_0_0.HpeKmsConfig


Description	Passphrase can be either entered manually or auto generated
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Auto`	Passphrase is generated from the system.
`Manual`	Passphrase is entered manually.

KeyManagementType


Description	Key Management Type.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Key Management is Disabled
`Local`	Key Management Type is Local
`Remote`	Key Management Type is Remote

OpalBlockSid


Description	TCG Block SID.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Disable TCG Block SID feature.
`Enabled`	Enable TCG Block SID feature.

HpeMaintenanceWindow

@odata.type: "#HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow"

The HpeMaintenanceWindow resource describes the properties for managing the time window for a software or firmware update task or install set.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/maintenancewindows/{item}`	GET POST PATCH DELETE

Created

Member of HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow


Description	ISO-time of maintenance window creation (by whomever created this thing)
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Expire

Member of HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow


Description	ISO 8601 Redfish-style time string after which we will automatically change state to Expired - null for no expire time
Type	string
Read Only	False
Added	iLO6 1.05
Format	date-time

Modified

Member of HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow


Description	ISO-time of last maintenance window item update by updater (not client)
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

StartAfter

Member of HpeMaintenanceWindow.v1_0_1.HpeMaintenanceWindow


Description	ISO 8601 Redfish-style time string of earliest execution.
Type	string
Read Only	False
Added	iLO6 1.05
Format	date-time

HpeMaintenanceWindowCollection

@odata.type: "#HpeMaintenanceWindowCollection.HpeMaintenanceWindowCollection"

A Collection of HpeMaintenanceWindow resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/maintenancewindows`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeMaintenanceWindow

Members (array)

Member of HpeMaintenanceWindowCollection.HpeMaintenanceWindowCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeMaintenanceWindowCollection.HpeMaintenanceWindowCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeMaintenanceWindowCollection.HpeMaintenanceWindowCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpePowerMeter

@odata.type: "#HpePowerMeter.v2_0_1.HpePowerMeter"

The HpePowerMeter resource contains the computer system power history logged by the BMC.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/fastpowermeter`	GET
`/redfish/v1/chassis/{item}/power/powermeter`	GET

Average


Description	Average power across all samples, over the last 24 hours.
Type	integer
Read Only	True
Added	iLO6 1.05

Maximum


Description	Maximum power across all samples, taken from the 24 hour history.
Type	integer
Read Only	True
Added	iLO6 1.05

Minimum


Description	Minimum power across all samples, taken from the 24 hour history.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail (array)

PowerDetail is an array containing elements of:

PowerDetail[{item}].AmbTemp Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Ambient temperature, in degrees Celsius.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].Average Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Average power in Watts over the sample time.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].Cap Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The applicable power cap in Watts at the time of this power sample.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].CpuAvgFreq Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	CPU average frequency in MHz.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].CpuCapLim Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Measures the effect of the power cap on performance in percent.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].CpuMax Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The percentage of time the CPU spent in its maximum power mode.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].CpuPwrSavLim Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Measures the effect of CPU Power Regulator state switching on performance in percent.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].CpuUtil Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	CPU utilization in percent.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].CpuWatts Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The power consumed by the system CPUs in Watts.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].DimmWatts Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The power consumed by the system memory DIMMs in Watts.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].GpuWatts Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	The power consumed by the GPU(s) in Watts. This will be 0 if no GPUs are installed or if the drivers are not loaded.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].Minimum Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Minimum power in Watts over the sample time.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].Peak Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Peak power in Watts over the sample time.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].PrMode Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Power Regulator mode, which can be OS Control, Static High, Static Low or Dynamic.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`dyn`	Dynamic Mode - CPU power regulation is managed dynamically by the firmware.
`min`	Minimum Mode - CPU power regulation is configured to save as much power as possible at the possible expense of performance.
`max`	Maximum Mode - CPU power regulation is configured for maximum performance at the possible expense of power efficiency.
`osc`	OS Control Mode - CPU power regulation is managed by the Operating System.

PowerDetail[{item}].PunCap Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	If true, CPU performance is being penalized by the current power cap.
Type	boolean
Read Only	True
Added	iLO6 1.05

PowerDetail[{item}].Time Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	Time at which the power sample detail was captured.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

PowerDetail[{item}].UnachCap Member of HpePowerMeter.v2_0_1.HpePowerMeter


Description	If true, the configured power cap could not be achieved due to system power requirements.
Type	boolean
Read Only	True
Added	iLO6 1.05

Samples


Description	Number of samples in the array.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeRemoteSupport

@odata.type: "#HpeRemoteSupport.v2_6_0.HpeRemoteSupport"

The HpeRemoteSupport resource describes the properties for management of HPE Embedded Report Support.

This resource type was added in iLO 5 1.20

HpeRemoteSupport enables management of HPE Remote Support configuration on iLO 5.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/remotesupportservice`	GET POST PATCH

Links to other Resources

Link Name	Destination type
`ServiceEventLogs`	Collection of LogEntry

ConnectModel


Description	The Remote Support connect model type.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`CentralConnect`

DestinationPort


Description	The port number of the Insight Remote Support server. This is applicable for Central Connect only.
Type	integer
Read Only	True
Added	iLO6 1.05

DestinationURL


Description	The host name or IP address of the Remote Support server. This is applicable for Central Connect only.
Type	string
Read Only	True
Added	iLO6 1.05

ExternalAgentName


Description	This indicates the name of external Remote Support agent.
Type	string
Read Only	True
Added	iLO6 1.05

HpePassportPassword


Description	HPE Passport Account Password.
Type	string or null
Read Only	True
Added	iLO6 1.05

HpePassportUserId


Description	HPE Passport Account Id.
Type	string
Read Only	True
Added	iLO6 1.05

LastTransmissionDate


Description	The last transmission date.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

LastTransmissionError


Description	The last transmission error.
Type	string
Read Only	True
Added	iLO6 1.05

LastTransmissionType


Description	The last transmission type.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`ActiveHealthSystemData`
`L2DataCollection`
`Registration`
`Deregistration`
`ServiceEvent`
`NoTransmission`
`Null`

MaintenanceModeEnabled


Description	This indicates if the server is in Maintenance Mode or not.
Type	boolean
Read Only	True
Added	iLO6 1.05

MaintenanceTimeLeftInMinutes


Description	This indicates the time remaining in minutes for the server to be in the maintenance mode.
Type	integer
Read Only	True
Added	iLO6 1.05

ProxySettings

ProxySettings.Password Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport


Description	Password for web proxy server authentication.
Type	string or null
Read Only	False
Added	iLO6 1.05

ProxySettings.Port Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport


Description	Port number on which to communicate with the web proxy server.
Type	integer or null
Read Only	False
Added	iLO6 1.05

ProxySettings.Url Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport


Description	Web proxy server host name or IP address.
Type	string
Read Only	False
Added	iLO6 1.05
Format	url

ProxySettings.Username Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport


Description	Username for web proxy server authentication.
Type	string or null
Read Only	False
Added	iLO6 1.05

RemoteSupportEnabled


Description	This indicates if the Remote Support Service is available or not.
Type	boolean
Read Only	True
Added	iLO6 1.05

ServiceEventLogs

A reference to the collection of service event logs. ServiceEventLogs is a link ("@odata.id": URI) to another resource.

Actions

HpeRemoteSupport.RegisterDeviceToRemoteSupport Member of HpeRemoteSupport.v2_6_0.HpeRemoteSupport

Parameters:

DestinationUrl (string)

The host name or IP address of the Remote Support server. This is applicable for Central Connect only.

HpeSecureEraseReport

@odata.type: "#HpeSecureEraseReport.v1_1_0.HpeSecureEraseReport"

The HpeSecureEraseReport resource describes the secure erase status and the other details of the devices during the secure system erase operation.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureerasereportservice/secureerasereportentries/{item}`	GET

DeviceIdentifier

Member of HpeSecureEraseReport.v1_1_0.HpeSecureEraseReport


Description	This represents the unique identifier for the device in the system like it's physical location or the exact device path etc.,
Type	string or null
Read Only	True
Added	iLO6 1.05

DeviceType

Member of HpeSecureEraseReport.v1_1_0.HpeSecureEraseReport


Description	This indicates the device type being securely erased.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`SATADrives`	This indicates the device type is SATA drive
`NVMeDrives`	This indicates the device type is NVMe drive
`NVDIMM`	This indicates the device type is NVDIMM/Persistent Memory
`TPM`	This indicates the device type is TPM (Trusted Platform Module)
`UEFIStore`	This indicates the device type is UEFI Store
`NAND`	This indicates the device type is Embedded NAND Flash
`NVRAM`	This indicates the device type is NVRAM (Battery backed SRAM)
`PCIControllers`	This indicates the device type is PCI Controllers

EraseEndTime

Member of HpeSecureEraseReport.v1_1_0.HpeSecureEraseReport


Description	The date and time of the end of secure erase operation, ISO8601 Redfish-style time
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

EraseStartTime

Member of HpeSecureEraseReport.v1_1_0.HpeSecureEraseReport


Description	The date and time of the start of secure erase operation, ISO8601 Redfish-style time
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

EraseStatus

Member of HpeSecureEraseReport.v1_1_0.HpeSecureEraseReport


Description	Indicates the secure erase status of the individual components
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Idle`	Indicates Secure System Erase is not started
`Initiated`	Indicates Secure System Erase process is started
`InProgress`	Indicates Secure System Erase process is under progress
`CompletedWithSuccess`	Indicates Secure System Erase process has been completed with no errors
`CompletedWithErrors`	Indicates Secure System Erase process has been completed with some errors
`Failed`	Indicates Secure System Erase process has failed

EraseType

Member of HpeSecureEraseReport.v1_1_0.HpeSecureEraseReport


Description	This indicates the NIST SP800-88 Rev.1 (National Institute of Standards and Technology) approved techniques to sanitize a particular media or device.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Purge`	This indicates that Purge technique is used to sanitize the device.
`Clear`	This indicates that Clear technique is used to sanitize the device.

SerialNumber

Member of HpeSecureEraseReport.v1_1_0.HpeSecureEraseReport


Description	This represents the serial number of the device being erased.
Type	string or null
Read Only	True
Added	iLO6 1.05

HpeSecureEraseReportCollection

@odata.type: "#HpeSecureEraseReportCollection.HpeSecureEraseReportCollection"

A Collection of HpeSecureEraseReport resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureerasereportservice/secureerasereportentries`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSecureEraseReport

Members (array)

Member of HpeSecureEraseReportCollection.HpeSecureEraseReportCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSecureEraseReportCollection.HpeSecureEraseReportCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeSecureEraseReportCollection.HpeSecureEraseReportCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeSecureEraseReportService

@odata.type: "#HpeSecureEraseReportService.v1_0_0.HpeSecureEraseReportService"

The HpeSecureEraseReportService resource describes the properties of the Secure Erase Report feature.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureerasereportservice`	GET POST

Links to other Resources

Link Name	Destination type
`Links/SecureEraseReportEntries`	Collection of HpeSecureEraseReport

EraseInitiatedBy

Member of HpeSecureEraseReportService.v1_0_0.HpeSecureEraseReportService


Description	This indicates the user name who initiated the secure system erase process.
Type	string or null
Read Only	True
Added	iLO6 1.05

ServerSerialNumber

Member of HpeSecureEraseReportService.v1_0_0.HpeSecureEraseReportService


Description	This represents the server serial number.
Type	string or null
Read Only	True
Added	iLO6 1.05

Actions

HpeSecureEraseReportService.DeleteSecureEraseReport Member of HpeSecureEraseReportService.v1_0_0.HpeSecureEraseReportService There are no parameters for this action.

HpeSecurityService

@odata.type: "#HpeSecurityService.v2_4_0.HpeSecurityService"

The HpeSecurityService resource describes the properties for management of the security configuration of the BMC.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/securityservice`	GET PATCH

Links to other Resources

Link Name	Destination type
`Links/SSO`	HpeiLOSSO
`Links/SecurityParams`	Collection of HpeiLOSecurityParam
`Links/AutomaticCertificateEnrollment`	HpeAutomaticCertEnrollment
`Links/HttpsCert`	HpeHttpsCert
`Links/CertAuth`	HpeCertAuth
`Links/ESKM`	HpeESKM
`Links/SecurityDashboard`	HpeiLOSecurityDashboard

ComponentIntegrityPolicy

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value
`NoPolicy`
`HaltBootOnSPDMFailure`

CurrentCipher

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Current cipher in use.
Type	string
Read Only	True
Added	iLO6 1.05

GlobalComponentIntegrity

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value
`Enabled`
`Disabled`

LoginSecurityBanner

LoginSecurityBanner.IsEnabled Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Login security banner is enabled or not.
Type	boolean
Read Only	False
Added	iLO6 1.05

LoginSecurityBanner.SecurityMessage Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Text message to appear on the iLO login page and iLO SSH pre-authentication banner when login security banner is enabled.
Type	string
Read Only	False
Added	iLO6 1.05

OpenBMCTransferOfOwnership

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	State of iLO-OpenBMC Transfer of Ownership feature.
Type	string or null
Read Only	True
Added	iLO6 1.35

The following are the supported values:

Value	Description
`Supported`	OpenBMC Transfer feature is supported but it is not enabled for transfer.
`Inhibited`	OpenBMC Transfer feature is inhibited for this server.
`Configured`	iLO is configured successfully for OpenBMC transfer.
`UnSupportedSecurityState`	OpenBMC Transfer feature is not supported in FIPS/CNSA security states.
`UnSupportedSecureElement`	OpenBMC Transfer feature is not supported without correct Secure Element.
`Error`	Error state.

OpenBMCTransferStatus

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	OpenBMC transfer status.
Type	string or null
Read Only	True
Added	iLO6 1.35

The following are the supported values:

Value	Description
`NotPerformed`	OpenBMC Transfer is not performed
`Performed`	OpenBMC Transfer is performed at least once
`Unknown`	Status unknown

PlatformCert

PlatformCert.Certificates This is a reference to a collection of certificates used for PlatformCert by this manager. Certificates is a link ("@odata.id": URI) to another resource.

PlatformCertUpdate

PlatformCertUpdate.Certificates This is a reference to a collection of certificates used for PlatformCert Updates by this manager. Certificates is a link ("@odata.id": URI) to another resource.

SSHHostKey

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	SSH Host Key identifying the service.
Type	string
Read Only	True
Added	iLO6 1.05

SecurityState

Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	The operational security level of this Manager.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Wipe`	Manager is currently wiping security related content and returning to a lower security mode. This state will transition automatically when finished.
`Production`	Manager is operating in a normal security mode. Default state for new systems.
`HighSecurity`	Manager is operating in high security mode, requiring extra authentication on host interface(s), and stronger encryption on network interfaces.
`FIPS`	Similar to High Security. This mode is intended to meet the FIPS 140-2 level 1 and Common Criteria security requirements. A reset to defaults is required to exit this mode.
`CNSA`	Same as FIPS. Additionally meets the criteria for NSA Commercial National Security Algorithm suite. Must be in FIPS mode to transition to CNSA.
`SuiteB`	Same as FIPS. Additionally meets the criteria for NSA SuiteB Top Secret installations. Must be in FIPS mode to transition to SuiteB.
`SynergySecurityMode`	Synergy Security Mode is the mode supported by the Synergy Composer.

SecurityState@Redfish.AllowableValues (array)

Member of HpeSecurityService.v2_4_0.HpeSecurityService

SecurityState@Redfish.AllowableValues is an array containing elements of:

SecurityState@Redfish.AllowableValues[{item}] Member of HpeSecurityService.v2_4_0.HpeSecurityService


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Wipe`
`Production`
`HighSecurity`
`FIPS`
`CNSA`
`SuiteB`

SystemIAK

SystemIAK.Certificates This is a reference to a collection of certificates used for System IAK by this manager. Certificates is a link ("@odata.id": URI) to another resource.

SystemIDevID

SystemIDevID.Certificates This is a reference to a collection of certificates used for System IDevId by this manager. Certificates is a link ("@odata.id": URI) to another resource.

TLSVersion

TLSVersion.TLS1_0 Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	This Indicate whether the TLS 1.0 is Enabled or disabled.
Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	Enabled TLS 1.0.
`Disabled`	Disabled TLS 1.0.

TLSVersion.TLS1_1 Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	This Indicate whether the TLS 1.1 is Enabled or disabled.
Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	Enabled TLS 1.1.
`Disabled`	Disabled TLS 1.1.

TLSVersion.TLS1_2 Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	This Indicate whether the TLS 1.2 is Enabled or disabled.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	Enabled TLS 1.2.
`Disabled`	Disabled TLS 1.2.

TLSVersion.TLS1_3 Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	This Indicate whether the TLS 1.3 is Enabled or disabled.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	Enabled TLS 1.3.
`Disabled`	Disabled TLS 1.3.

TrustedOSSecurity

TrustedOSSecurity.EnableBackgroundScan Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Enables or disables background scan of host OS software.
Type	boolean
Read Only	False
Added	iLO6 1.05

TrustedOSSecurity.LastScanResult Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Health of the host after the last scan done by Trusted OS Security scan engine.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`OK`	The last Trusted OS Security scan completed without finding any issues.
`Critical`	The last Trusted OS Security scan completed finding issue(s). Refer to the SL log for details.
`Unknown`	The health is Unknown because either the scan data is unavailable or scan is not enabled or last scan failed to complete.

TrustedOSSecurity.LastScanTime Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	The time stamp of the last Trusted OS Security scan.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

TrustedOSSecurity.OnIntegrityFailure Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Sets the policy for how the Trusted OS Security check handles integrity failures.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`NoAction`	No action will be taken when a failure is detected.
`Alert`	Generate an alert when a failure is detected.
`PowerOff`	Gracefully power system off when a failure is detected.
`PowerOffForce`	Force system power off when a failure is detected.
`Reset`	Reset system power off when a failure is detected.
`ColdBoot`	ColdBoot system power off when a failure is detected.
`ForceNMI`	ForceNMI system power off when a failure is detected.

TrustedOSSecurity.ScanEverySeconds Member of HpeSecurityService.v2_4_0.HpeSecurityService


Description	Sets the interval between Trusted OS Security scans in second increments.
Type	integer or null
Read Only	False
Added	iLO6 1.05

iLOIDevID

iLOIDevID.Certificates This is a reference to a collection of certificates used for iLO IDevId by this manager. Certificates is a link ("@odata.id": URI) to another resource.

iLOLDevID

iLOLDevID.Certificates This is a reference to a collection of certificates used for iLO LDevId by this manager. Certificates is a link ("@odata.id": URI) to another resource.

HpeServerAccHddService

@odata.type: "#HpeServerAccHddService.v1_0_0.HpeServerAccHddService"

The HpeServerAccHddService resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/acchddservice`	GET

BackplaneInfo

BackplaneInfo.EndBay Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents a ending number of the bay.
Type	integer
Read Only	True
Added	iLO6 1.05

BackplaneInfo.FirmwareRevision Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Indicates the firmware revision in ASCII value.
Type	string
Read Only	True
Added	iLO6 1.05

BackplaneInfo.HostPortsInfo (array) Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService

HostPortsInfo is an array containing elements of:

HostPortsInfo[{item}].NodeNumber Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents the node number of compute node attached to host port x in SEP.
Type	integer
Read Only	True
Added	iLO6 1.05

HostPortsInfo[{item}].PortNumber Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents the number of physical host ports in SEP.
Type	integer
Read Only	True
Added	iLO6 1.05

HostPortsInfo[{item}].SlotNumber Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents the slot number of SAS attached to host port x in SEP.
Type	integer
Read Only	True
Added	iLO6 1.05

BackplaneInfo.SEPID Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Indicates the storage enclosure processor ID.
Type	integer
Read Only	True
Added	iLO6 1.05

BackplaneInfo.SEPNodeId Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	The node ID represent the node ID where the storage enclosure processor is residing.
Type	integer
Read Only	True
Added	iLO6 1.05

BackplaneInfo.StartBay Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents a starting number of the bay.
Type	integer
Read Only	True
Added	iLO6 1.05

BackplaneInfo.TotalBays Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Total bay count represents the number of bays attached to the SEP.
Type	integer
Read Only	True
Added	iLO6 1.05

BackplaneInfo.TypeID Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Indicates the Backplane type ID for the identifier for backplane type.
Type	integer
Read Only	True
Added	iLO6 1.05

BackplaneInfo.WWID Member of HpeServerAccHddService.v1_0_0.HpeServerAccHddService


Description	Represents a unique world wide ID defining a SEP.
Type	string
Read Only	True
Added	iLO6 1.05

HpeServerAccHddZone

@odata.type: "#HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone"

The HpeServerAccHddZone resource describes the properties for management of shared hard drives in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/acchddservice/zone`	GET POST

BackupZoneConfigurationInBmc

BackupZoneConfigurationInBmc.HostPort (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

HostPort is an array containing elements of:

HostPort[{item}].BayNumber (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

BayNumber is an array containing elements of:

BayNumber[{item}] Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Type	integer
Read Only	True
Added	iLO6 1.05

HostPort[{item}].PortNumber Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	Represents the number of physical host ports in SEP, null represents unassigned bay group.
Type	integer or null
Read Only	True
Added	iLO6 1.05

CurrentZoneConfiguration

CurrentZoneConfiguration.HostPort (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

HostPort is an array containing elements of:

HostPort[{item}].BayNumber (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

BayNumber is an array containing elements of:

BayNumber[{item}] Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Type	integer
Read Only	True
Added	iLO6 1.05

HostPort[{item}].PortNumber Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	Represents the number of physical host ports in SEP, null represents unassigned bay group.
Type	integer or null
Read Only	True
Added	iLO6 1.05

PendingZoneConfiguration

PendingZoneConfiguration.HostPort (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

HostPort is an array containing elements of:

HostPort[{item}].BayNumber (array) Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone

BayNumber is an array containing elements of:

BayNumber[{item}] Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Type	integer
Read Only	True
Added	iLO6 1.05

HostPort[{item}].PortNumber Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	Represents the number of physical host ports in SEP, null represents unassigned bay group.
Type	integer or null
Read Only	True
Added	iLO6 1.05

SEPNodeId

Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	The node ID represent the node ID where the storage enclosure processor is residing.
Type	integer
Read Only	True
Added	iLO6 1.05

TypeID

Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone


Description	Indicates the Backplane type ID for the identifier for backplane type.
Type	integer
Read Only	True
Added	iLO6 1.05

Actions

HpeServerAccHddZone.BackupConfigurationToBmc Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone Backup Apollo Chassis Controller Hdd zone configuration to BMC.

There are no parameters for this action.

HpeServerAccHddZone.LoadDefault Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone Load Apollo Chassis Controller default Hdd zone configuration.

There are no parameters for this action.

HpeServerAccHddZone.ConfigureZone Member of HpeServerAccHddZone.v1_0_0.HpeServerAccHddZone Execute Apollo Chassis Controller Hdd zone configuration.

Parameters:

HostPort (array)

HpeServerAccPowerCalibration

@odata.type: "#HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration"

The HpeServerAccPowerCalibration resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice/calibration`	GET POST

CalibrationData

CalibrationData.EndTime Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The calibration end time stamp.
Type	string
Read Only	True
Added	iLO6 1.05

CalibrationData.StartTime Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The calibration start time stamp.
Type	string
Read Only	True
Added	iLO6 1.05

CalibrationData.State Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	Specifies whether the calibration is valid or not.
Type	boolean
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower CalibrationData.ThrottlePeakPower.Percent_000 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 0 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_005 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 5 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_010 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 10 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_015 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 15 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_020 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 20 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_025 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 25 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_030 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 30 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_035 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 35 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_040 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 40 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_045 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 45 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_050 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 50 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_055 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 55 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_060 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 60 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_065 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 65 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_070 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 70 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_075 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 75 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_080 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 80 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_085 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 85 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_090 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 90 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_095 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 95 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ThrottlePeakPower.Percent_100 Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The peak power of 100 Percent throttling.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationData.ZoneNumber Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The zone number either on the entire chassis or specific zone. 0 for entire chassis, other number is for specific zone.
Type	integer
Read Only	True
Added	iLO6 1.05

CalibrationInProgress

Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration


Description	The current state of the chassis power zone calibration task.
Type	boolean
Read Only	True
Added	iLO6 1.05

Actions

HpeServerAccPowerCalibration.Calibrate Member of HpeServerAccPowerCalibration.v1_0_0.HpeServerAccPowerCalibration Execute the Apollo Chassis Controller power calibration configuration.

Parameters:

EEPROMSaveEnabled (boolean)

AllZone (boolean)

Seconds (integer)

ZoneNumber (integer)

ActionType (string)

Value	Description
Start
Stop

HpeServerAccPowerLimit

@odata.type: "#HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit"

The HpeServerAccPowerLimit resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice/powerlimit`	GET POST

ActualPowerLimits (array)

Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit

ActualPowerLimits is an array containing elements of:

ActualPowerLimits[{item}].PowerLimitInWatts Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The actual power limit (in watts) for the zone, it will be set to null when power limit disabled.
Type	integer or null
Read Only	False
Added	iLO6 1.05

ActualPowerLimits[{item}].ZoneNumber Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The zone number either on the entire chassis or specific zone. 0 for entire chassis, other number is for specific zone.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerLimitRanges (array)

Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit

PowerLimitRanges is an array containing elements of:

PowerLimitRanges[{item}].MaximumPowerLimit Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The Maximum power limit (in watts) for the zone.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerLimitRanges[{item}].MinimumPowerLimit Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The Minimum power limit (in watts) for the zone.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerLimitRanges[{item}].ZoneNumber Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The zone number either on the entire chassis or specific zone. 0 for entire chassis, other number is for specific zone.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerLimits (array)

Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit

PowerLimits is an array containing elements of:

PowerLimits[{item}].PowerLimitInWatts Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The target power limit (in watts) for the zone, it will be set to null when power limit disabled.
Type	integer or null
Read Only	False
Added	iLO6 1.05

PowerLimits[{item}].ZoneNumber Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit


Description	The zone number either on the entire chassis or specific zone. 0 for entire chassis, other number is for specific zone.
Type	integer
Read Only	True
Added	iLO6 1.05

Actions

HpeServerAccPowerLimit.ConfigurePowerLimit Member of HpeServerAccPowerLimit.v1_0_0.HpeServerAccPowerLimit Deploy the Apollo Chassis Controller power limit configuration.

Parameters:

PowerLimits (array)

HpeServerAccPowerNodesInfo

@odata.type: "#HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo"

The HpeServerAccPowerNodesInfo resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice/nodesinfo`	GET

MaxSupportedNodes

Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo


Description	Total Nodes supported in Chassis.
Type	integer
Read Only	True
Added	iLO6 1.05

NodeInfoList (array)

Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo

NodeInfoList is an array containing elements of:

NodeInfoList[{item}].NodeNumber Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo


Description	The physical node number in chassis.
Type	integer
Read Only	True
Added	iLO6 1.05

NodeInfoList[{item}].Throttle Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo


Description	It indicates the current throttle on the node. (PWM %)
Type	integer
Read Only	True
Added	iLO6 1.05

NodeInfoList[{item}].WarningStatus Member of HpeServerAccPowerNodesInfo.v1_0_0.HpeServerAccPowerNodesInfo


Description	Specifies whether the node is in warning status or not. WarningStatus indicates a node is over loading and chassis manager force it throttle at 50% for 5 mins
Type	boolean
Read Only	True
Added	iLO6 1.05

HpeServerAccPowerService

@odata.type: "#HpeServerAccPowerService.v1_0_0.HpeServerAccPowerService"

The HpeServerAccPowerService resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice`	GET PATCH

EEPROMSaveEnabled

Member of HpeServerAccPowerService.v1_0_0.HpeServerAccPowerService


Description	Determines whether the EEPROM save is enabled or disabled.
Type	boolean
Read Only	False
Added	iLO6 1.05

PowerRegulationEnabled

Member of HpeServerAccPowerService.v1_0_0.HpeServerAccPowerService


Description	Determines whether power regulation is enabled or disabled.
Type	boolean
Read Only	False
Added	iLO6 1.05

PowerRegulatorMode

Member of HpeServerAccPowerService.v1_0_0.HpeServerAccPowerService


Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ACRedundancy`	AC Redundancy with Throttling Mode (Max Performance w/ Redundancy).
`UserConfig`	User Configurable Mode.
`APM`	APM Power Regulator Mode. Cannot configure by iLO.
`PowerFeedProtect`	Power Feed Protection Mode.

HpeServerAccPowerZone

@odata.type: "#HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone"

The HpeServerAccPowerZone resource describes the properties for management of shared power in an enclosure.

This resource type was added in iLO 5 1.20 and is available on HPE ProLiant Apollo XL systems.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power/accpowerservice/zone`	GET POST

ZoneConfiguration

ZoneConfiguration.Zone (array) Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone

Zone is an array containing elements of:

Zone[{item}].Node (array) Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone

Node is an array containing elements of:

Node[{item}].NodeNumber Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone


Description	The node number of zone configuration.
Type	integer
Read Only	True
Added	iLO6 1.05

Node[{item}].NodePriority Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone


Description	The power regulation node priority, the range must between 1 - 5. 5 is default and lowest priority.
Type	integer
Read Only	True
Added	iLO6 1.05

Zone[{item}].ZoneNumber Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone


Description	The zone number of zone configuration.
Type	integer
Read Only	True
Added	iLO6 1.05

Zone[{item}].ZonePriority Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone


Description	The power regulation zone priority, the range must between 1 - 5. 5 is default and lowest priority.
Type	integer
Read Only	True
Added	iLO6 1.05

Actions

HpeServerAccPowerZone.ConfigureZone Member of HpeServerAccPowerZone.v1_0_0.HpeServerAccPowerZone Execute the Apollo Chassis Controller power regulation zone configuration.

Parameters:

Zone (array)

HpeServerBootSettings

@odata.type: "#HpeServerBootSettings.v2_0_0.HpeServerBootSettings"

The schema definition of the server UEFI Boot Order resource.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/bios/boot`	GET
`/redfish/v1/systems/{item}/bios/boot/settings`	GET PATCH

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeServerBootSettings
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings See the Redfish standard schema and specification for information on common @Redfish properties.

BootSources (array)

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings

BootSources is an array containing elements of:

BootSources[{item}].BootString Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	User-readable string that describes the UEFI boot option.
Type	string
Read Only	True
Added	iLO6 1.05

BootSources[{item}].CorrelatableID Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	Contains any CorrelatableIDs that represent this boot option. The correlatableID values can be JSON Pointers or UEFI identifiers.
Type	string
Read Only	True
Added	iLO6 1.05

BootSources[{item}].StructuredBootString Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	Uniquely identifies this boot option within the server.
Type	string
Read Only	True
Added	iLO6 1.05

BootSources[{item}].UEFIDevicePath Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	Standardized text representation of the UEFI device path for this boot option, in UTF-8 format.
Type	string
Read Only	True
Added	iLO6 1.05

DefaultBootOrder (array)

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings

DefaultBootOrder is an array containing elements of:

DefaultBootOrder[{item}] Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	Default UEFI boot order device type. This is used to define the order in which UEFI boot order is reset to when a default configuration is requested.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`UefiShell`
`Floppy`
`Cd`
`Usb`
`EmbeddedStorage`
`PcieSlotStorage`
`EmbeddedFlexLOM`
`PcieSlotNic`

DesiredBootDevices (array)

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings

DesiredBootDevices is an array containing elements of:

DesiredBootDevices[{item}].CorrelatableID Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	Standardized text representation of the UEFI device path of the desired boot device, in UTF-8 format. For example 'PciRoot(0x0)/Pci(0x2,0x2)/Pci(0x0,0x0)'
Type	string
Read Only	False
Added	iLO6 1.05

DesiredBootDevices[{item}].Lun Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	The Logical Unit Number (LUN) of the desired boot device. This value must be a hexadecimal string with an even number of 2 to 16 characters, excluding the first two characters, 0x (for example, '0x01').
Type	string
Read Only	False
Added	iLO6 1.05

DesiredBootDevices[{item}].Wwn Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	The Fibre Channel World Wide Name (WWN) of the desired boot device. This value must be a hexadecimal string with an even number of 2 to 16 characters, excluding the first two characters, 0x (for example, '0x0001020304050607').
Type	string
Read Only	False
Added	iLO6 1.05

DesiredBootDevices[{item}].iScsiTargetName Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	The iSCSI node target name of the desired boot device. The value must be a string based on IETF RFC 3270, and can be up to 223 characters in length (for example, 'iqn.1991-05.com.microsoft:iscsitarget-iscsidisk-target').
Type	string
Read Only	False
Added	iLO6 1.05

PersistentBootConfigOrder (array)

Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings

PersistentBootConfigOrder is an array containing elements of:

PersistentBootConfigOrder[{item}] Member of HpeServerBootSettings.v2_0_0.HpeServerBootSettings


Description	The structured boot string that references a corresponding entry in the BootSources array.
Type	string
Read Only	True
Added	iLO6 1.05

HpeServerConfigLock

@odata.type: "#HpeServerConfigLock.v1_0_0.HpeServerConfigLock"

The schema definition for Server Configuration Lock configuration.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/Systems/{item}/Bios/Serverconfiglock/Settings`	GET PATCH
`/redfish/v1/systems/{item}/bios/Serverconfiglock`	GET

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeServerConfigLock
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock See the Redfish standard schema and specification for information on common @Redfish properties.

NewServerConfigLockPassword

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	The new Server Configuration Lock password. This field is used to update the current Server Configuration Lock password and force the system configuration digital fingerprint to be recalculated.
Type	string or null
Read Only	True
Added	iLO6 1.05

ServerConfigLockChallenge

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to enable or disable a Server Configuration Lock password challenge on every boot.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Disable Server Configuration Lock password challenge on every boot.
`Enabled`	Enable Server Configuration Lock password challenge on every boot.
`Null`	A value is temporarily unavailable

ServerConfigLockDisable

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to disable Server Configuration Lock.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`False`	Don't disable Server Configuration Lock.
`True`	Disable Server Configuration Lock.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludeCpus

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude CPU information from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`False`	Do not exclude CPU information from the Digital Fingerprint.
`True`	Exclude CPU information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludeDimms

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude DIMM information from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`False`	Do not exclude DIMM information from the Digital Fingerprint.
`True`	Exclude DIMM information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludeFwRevs

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude system firmware revisions from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`False`	Do not exclude system firmware revision information from the Digital Fingerprint.
`True`	Exclude system firmware revision information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludePciSlots

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude PCIe slot information from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`False`	Do not exclude PCIe slot information from the Digital Fingerprint.
`True`	Exclude PCIe slot information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockExcludeSecurity

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to exclude security configuration information from the Digital Fingerprint. Note that this setting only takes effect when Server Configuration Lock is enabled/reenabled.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`False`	Do not exclude security configuration information from the Digital Fingerprint.
`True`	Exclude security configuration information from the Digital Fingerprint.
`Null`	A value is temporarily unavailable

ServerConfigLockLogStored

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Has a Server Configuration Lock failure log been stored?
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`True`	A Server Configuration Lock failure has been logged.
`False`	A Server Configuration Lock failure has not been logged.

ServerConfigLockPassword

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	The Server Configuration Lock password. If Server Configuration Lock is currently enabled, this field is used to convey the current Server Configuration Lock password and is required to make any Server Configuration Lock configuration changes. If Server Configuration Lock is currently disabled, this field is used to set the Server Configuration Lock password, and to digitally fingerprint the system to enable Server Configuration Lock.
Type	string or null
Read Only	True
Added	iLO6 1.05

ServerConfigLockState

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Enabled/Disabled state of the Server Configuration Lock Feature.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	The Server Configuration Lock feature is disabled.
`Enabled`	The Server Configuration Lock feature is enabled.

ServerConfigLockTamperHalt

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to enable or disable the Server Configuration Lock behavior to halt on a configuration change detection.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Disable Server Configuration Lock behavior to halt on configuration changes.
`Enabled`	Enable Server Configuration Lock behavior to halt on configuration changes.
`Null`	A value is temporarily unavailable

ServerConfigLockTransport

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to enable or disable Server Configuration Lock "first-boot" behaviors. This option is expected to be enabled just prior to shipping the server. When the server arrives at its destination and is first powered on, Server Configuration Lock will require the Server Configuration Lock password in order to boot. Server Configuration Lock will also indicate if someone attempted to change the system configuration during the shipment process.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Disable Server Configuration Lock "first-boot" behaviors.
`Enabled`	Enable Server Configuration Lock "first-boot" behaviors.
`Null`	A value is temporarily unavailable

ServerConfigLockTransportAudit

Member of HpeServerConfigLock.v1_0_0.HpeServerConfigLock


Description	Select this option to enable or disable out-of-band acknowledge of Server Configuration Lock "first-boot" behaviors (see ServerConfigLockTransport).
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Disable Server Configuration Lock out-of-band acknowledge of "first-boot" audit.
`Enabled`	Enable Server Configuration Lock out-of-band acknowledge of "first-boot" audit.
`Null`	A value is temporarily unavailable

HpeServerDevice

@odata.type: "#HpeServerDevice.v2_1_0.HpeServerDevice"

The HpeServerDevice resource describes the properties of FRU devices.

This resource type was added in iLO 5 1.20

HpeServerDevice represents physical server devices including part information. This is especially useful for system inventory.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/devices/{item}`	GET PATCH

Links to other Resources

Link Name	Destination type
`DeviceInstances[]`	HpeServerPciDevice

ComponentIntegrityStatus


Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Unsupported`	Unsuccessful verification.
`Success`	Successful verification.
`Failure`

DeviceInstances (array)

DeviceInstances is an array containing elements of:

DeviceInstances[{item}].@odata.id Member of HpeServerDevice.v2_1_0.HpeServerDevice


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

DeviceType


Description	Device type.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`GPU`	GPU
`PLX Controller`	PLX Controller (Bridge)
`Expansion Riser`	Expansion Riser
`Smart Storage`	Smart Storage
`SAS/SATA Storage Controller`	SAS/SATA Storage Controller
`IDE Storage Controller`	IDE Storage Controller
`USB Storage Controller`	USB Storage Controller
`Storage Controller`	Storage Controller
`LOM/NIC`	LOM/NIC
`Converged Network Adapter`	Converged Network Adapter
`Fibre Channel`	Fibre Channel
`Direct Attached NVMe Device`	Direct Attached NVMe Device
`Backplane PIC`	Backplane PIC
`Smart Storage Battery`	Smart Storage Battery
`USB`	Universal Serial Bus
`TPM`	Trusted Platform Module
`Communication Controller`	Communication Controller
`Unknown`	Unknown Device Type
`Embedded SATA Controller`	Embedded SATA Controller

FirmwareVersion

FirmwareVersion.Current FirmwareVersion.Current.VersionString Member of HpeServerDevice.v2_1_0.HpeServerDevice


Description	This string represents the version of the firmware image.
Type	string or null
Read Only	True
Added	iLO6 1.05

FirmwareVersion.FirmwareVersions (array) Member of HpeServerDevice.v2_1_0.HpeServerDevice

FirmwareVersions is an array containing elements of:

FirmwareVersions[{item}].ComponentName Member of HpeServerDevice.v2_1_0.HpeServerDevice


Description	Name of GPU cores
Type	string or null
Read Only	True
Added	iLO6 1.10

FirmwareVersions[{item}].VersionString Member of HpeServerDevice.v2_1_0.HpeServerDevice


Description	Version String of GPU cores
Type	string or null
Read Only	True
Added	iLO6 1.10

Location


Description	Location of the device.
Type	string or null
Read Only	True
Added	iLO6 1.05

MCTPProtocolDisabled


Description	Set to true to disable MCTP on this slot. Once disabled, can be enabled only through MCTP factory reset.
Type	boolean
Read Only	False
Added	iLO6 1.05

Manufacturer


Description	Device manufacturer.
Type	string or null
Read Only	True
Added	iLO6 1.05

PartNumber


Description	Board part Number which is HPE PCA Assembly Number.
Type	string or null
Read Only	True
Added	iLO6 1.05

ProductPartNumber


Description	Product Part Number.
Type	string or null
Read Only	True
Added	iLO6 1.05

ProductVersion


Description	Product Version.
Type	string or null
Read Only	True
Added	iLO6 1.05

SerialNumber


Description	Product Serial Number.
Type	string or null
Read Only	True
Added	iLO6 1.05

Status

Member of HpeServerDevice.v2_1_0.HpeServerDevice See the Redfish standard schema and specification for information on common Status object.

HpeServerDeviceCollection

@odata.type: "#HpeServerDeviceCollection.HpeServerDeviceCollection"

A Collection of HpeServerDevice resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/devices`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeServerDevice

Members (array)

Member of HpeServerDeviceCollection.HpeServerDeviceCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeServerDeviceCollection.HpeServerDeviceCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeServerDeviceCollection.HpeServerDeviceCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeServerPciDevice

@odata.type: "#HpeServerPciDevice.v2_1_0.HpeServerPciDevice"

The HpeServerPciDevice resource describes the properties of PCI devices.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/pcidevices/{item}`	GET

BayNumber

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	Bay number value.
Type	integer
Read Only	True
Added	iLO6 1.05

Bifurcated

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	Indicates if the PCIe device support bifurcation.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`BifurcationNotSupported`	This device does not support Bifurcation.
`BifurcationSupportedPrimaryDevice`	This device does support Bifurcation.
`BifurcationSupportedSecondaryDevice`	This is second bifurcated device.

BifurcatedSecondaryDeviceLink

The link to the next bifurcated devices. BifurcatedSecondaryDeviceLink is a link ("@odata.id": URI) to another resource.

BusNumber

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI device bus number value.
Type	integer
Read Only	True
Added	iLO6 1.05

ClassCode

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI class code of the endpoint.
Type	integer
Read Only	True
Added	iLO6 1.05

DeviceID

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI device ID of the device.
Type	integer
Read Only	True
Added	iLO6 1.05

DeviceInstance

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI device instance value.
Type	integer
Read Only	True
Added	iLO6 1.05

DeviceLocation

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI device location.
Type	string
Read Only	True
Added	iLO6 1.05

DeviceNumber

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI device number value.
Type	integer
Read Only	True
Added	iLO6 1.05

DeviceResourceId

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI device resource id or hash id.
Type	string
Read Only	True
Added	iLO6 1.20

DeviceSubInstance

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI device sub-instance value.
Type	integer
Read Only	True
Added	iLO6 1.05

DeviceType

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	Device type value.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Flexible LOM`	Flexible LAN-On-Motherboard
`Embedded LOM`	Embedded LAN-On-Motherboard
`NIC`	Network Interface Controller
`HDD Not attached to a SA Controller`	Hard Disk Drive
`HDD Attached to a SA Controller`	Hard Disk Drive attached to an array controller
`Other PCI Device`	Other PCI Device
`Unknown`	Unknown PCI Device
`Other`	Other PCI Device
`Video`	Video Controller
`SCSI Controller`	SCSI Controller
`Ethernet`	Ethernet Controller
`Token Ring`	Token Ring Controller
`Sound`	Sound Controller
`PATA Controller`	Parallel ATA Controller
`SATA Controller`	Serial ATA Controller
`SAS Controller`	Serial Attached SCSI Controller
`Storage Controller`	Storage Controller (not Smart Array)
`Storage Array Controller`	Smart Array Storage Controller
`USB Hard Disk Drive`	USB Hard Disk Drive
`Firmware Volume`	Firmware Volume
`UEFI Shell`	UEFI Shell
`Generic UEFI USB Boot Entry`	Generic UEFI USB Boot Entry
`Dynamic Storage Array Controller`	Dynamic Smart Array Controller
`File`	File
`NVMe Hard Drive`	NVMe Hard Drive
`NVDIMM`	NVDIMM

EnclosureNumber

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	Enclosure number value.
Type	integer
Read Only	True
Added	iLO6 1.05

FunctionNumber

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI device function number value.
Type	integer
Read Only	True
Added	iLO6 1.05

LocationString

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	Text representation of the UEFI device location, in UTF-8 format
Type	string
Read Only	True
Added	iLO6 1.05

SegmentNumber

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI segment group number value.
Type	integer
Read Only	True
Added	iLO6 1.05

StructuredName

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI device structured name in UTF-8 format.
Type	string
Read Only	True
Added	iLO6 1.05

SubclassCode

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI sub class code of the endpoint.
Type	integer
Read Only	True
Added	iLO6 1.05

SubsystemDeviceID

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI subsystem device ID of the device.
Type	integer
Read Only	True
Added	iLO6 1.05

SubsystemVendorID

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI subsystem vendor ID of the device.
Type	integer
Read Only	True
Added	iLO6 1.05

UEFIDevicePath

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	Standardized text representation of the UEFI device path, in UTF-8 format.
Type	string
Read Only	True
Added	iLO6 1.05

VendorID

Member of HpeServerPciDevice.v2_1_0.HpeServerPciDevice


Description	PCI vendor ID of the device.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeServerPciDeviceCollection

@odata.type: "#HpeServerPciDeviceCollection.HpeServerPciDeviceCollection"

A Collection of HpeServerPciDevice resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/pcidevices`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeServerPciDevice

Members (array)

Member of HpeServerPciDeviceCollection.HpeServerPciDeviceCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeServerPciDeviceCollection.HpeServerPciDeviceCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeServerPciDeviceCollection.HpeServerPciDeviceCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeServerPCISlot

@odata.type: "#HpeServerPCISlot.v2_2_0.HpeServerPCISlot"

The HpeServerPCISlot resource describes the properties of PCI slots.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/pcislots/{item}`	GET

BusNumber


Description	PCI slot bus number.
Type	integer
Read Only	True
Added	iLO6 1.05

Characteristics

Characteristics.Provides3_3Volts Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	Provides 3.3 volts.
Type	boolean
Read Only	True
Added	iLO6 1.05

Characteristics.Provides5Volts Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	Provides 5.0 volts.
Type	boolean
Read Only	True
Added	iLO6 1.05

Characteristics.SlotIsShared Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	The slot shares its opening with another slot.
Type	boolean
Read Only	True
Added	iLO6 1.05

Characteristics.SupportsCardBus Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	PC Card slot supports Card Bus.
Type	boolean
Read Only	True
Added	iLO6 1.05

Characteristics.SupportsHotPlugDevices Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	Slot supports hot-plug devices.
Type	boolean
Read Only	True
Added	iLO6 1.05

Characteristics.SupportsModemRingResume Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	PC Card slot supports Modem Ring Resume.
Type	boolean
Read Only	True
Added	iLO6 1.05

Characteristics.SupportsPCCard16 Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	PC Card slot supports PC Card-16.
Type	boolean
Read Only	True
Added	iLO6 1.05

Characteristics.SupportsPowerManagementEventSignal Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	PCI slot supports Power Management Event signal.
Type	boolean
Read Only	True
Added	iLO6 1.05

Characteristics.SupportsSMBusSignal Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	PCI slot supports SMBUS signal.
Type	boolean
Read Only	True
Added	iLO6 1.05

Characteristics.SupportsZoomVideo Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot


Description	PC Card slot supports Zoom Video.
Type	boolean
Read Only	True
Added	iLO6 1.05

DeviceNumber


Description	PCI slot device number.
Type	integer
Read Only	True
Added	iLO6 1.05

FunctionNumber


Description	PCI slot function number.
Type	integer
Read Only	True
Added	iLO6 1.05

Length


Description	PCI slot length
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Short`
`Long`
`Other`

LinkLanes


Description	Bandwidth capacity of the slot, measured by the number of PCI Express Lanes present. Also known as the slot width.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`8 bit`
`16 bit`
`32 bit`
`64 bit`
`128 bit`
`x1`
`x2`
`x4`
`x8`
`x16`
`x32`
`Other`

SegmentNumber


Description	PCI slot segment group number value.
Type	integer
Read Only	True
Added	iLO6 1.30

Status

Member of HpeServerPCISlot.v2_2_0.HpeServerPCISlot See the Redfish standard schema and specification for information on common Status object.

SupportsHotPlug


Description	Specifies whether the slot supports hot-plug devices.
Type	boolean
Read Only	True
Added	iLO6 1.05

Technology


Description	PCI technology
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Proprietary`
`OCP NIC 3.0`
`PCIExpressGen5`
`PCIExpressGen4`
`PCIExpressGen3`
`PCIExpressGen2`
`PCIExpress`

UEFIDevicePath


Description	Standardized text representation of the UEFI device path, in UTF-8 format
Type	string
Read Only	True
Added	iLO6 1.05

HpeServerPCISlotCollection

@odata.type: "#HpeServerPCISlotCollection.HpeServerPCISlotCollection"

A Collection of HpeServerPCISlot resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/pcislots`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeServerPCISlot

Members (array)

Member of HpeServerPCISlotCollection.HpeServerPCISlotCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeServerPCISlotCollection.HpeServerPCISlotCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeServerPCISlotCollection.HpeServerPCISlotCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeSNMPAlertDestination

@odata.type: "#HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination"

The HpeSNMPAlertDestination resource describes the properties for SNMP Alert Destinations. The alert destination configuration up to 8 remote management systems that receive SNMP alerts from the BMC.

This resource type was added in iLO 5 1.20

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice/snmpalertdestinations/{item}`	GET PATCH DELETE

AlertDestination

Member of HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination


Description	The IP address or FQDN of remote management system that receive SNMP alerts.
Type	string
Read Only	False
Added	iLO6 1.05

SNMPAlertProtocol

Member of HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination


Description	Indicate the SNMP protocol associated with the AlertDestination.
Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`SNMPv1Trap`	Indicate SNMPv1 trap is enabled for the destination.
`SNMPv3Trap`	Indicate SNMPv3 trap is enabled for the destination. Needs to fill the SecurityName as well.
`SNMPv3Inform`	Indicate SNMPv3 Inform is enabled for the destination. Needs to fill the SecurityName as well.
`Null`	A value is temporarily unavailable

SNMPv3User

SNMPv3 User associated with the destination when SNMP alert protocol is SNMPv3trap. SNMPv3User is a link ("@odata.id": URI) to another resource.

SecurityName

Member of HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination


Description	Provides the SNMPv3 security name associated with SNMPv3trap or SNMPv3Inform set on SNMPAlertProtocol.
Type	string or null
Read Only	False
Added	iLO6 1.05

TrapCommunity

Member of HpeSNMPAlertDestination.v2_0_0.HpeSNMPAlertDestination


Description	The configured SNMPv1 trap community string.
Type	string
Read Only	False
Added	iLO6 1.05

HpeSNMPAlertDestinationCollection

@odata.type: "#HpeSNMPAlertDestinationCollection.HpeSNMPAlertDestinationCollection"

A Collection of HpeSNMPAlertDestination resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice/snmpalertdestinations`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSNMPAlertDestination

Members (array)

Member of HpeSNMPAlertDestinationCollection.HpeSNMPAlertDestinationCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSNMPAlertDestinationCollection.HpeSNMPAlertDestinationCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeSNMPAlertDestinationCollection.HpeSNMPAlertDestinationCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeSNMPUser

@odata.type: "#HpeSNMPUser.v2_1_0.HpeSNMPUser"

The HpeSNMPUser resource describes the properties for SNMP support. SNMPv3 supports the User-based Security Model (USM). With this model,security parameters are configured at both the agent level and the manager level. Messages exchanged between the agent and the manager are subject to a data integrity check and data origin authentication. Up to 8 user profiles are supported for setting SNMPv3 USM parameters.

This resource type was added in iLO 5 1.20

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice/snmpusers/{item}`	GET PATCH DELETE

AuthPassphrase


Description	Sets the passphrase to use for sign operations. Enter a value of 8 to 49 characters.
Type	string or null
Read Only	False
Added	iLO6 1.05

AuthProtocol


Description	Sets the message digest algorithm to use for encoding the authorization passphrase. The message digest is calculated over an appropriate portion of an SNMP message, and is included as part of the message sent to the recipient.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`MD5`	Indicate Message Digest Algorithm.
`SHA`	Indicate Secure Hash Algorithm.
`SHA256`	Indicate SHA256 Algorithm.

PrivacyPassphrase


Description	Sets the passphrase to use for encrypt operations. Enter a value of 8 to 49 characters.
Type	string or null
Read Only	False
Added	iLO6 1.05

PrivacyProtocol


Description	Sets the encryption algorithm to use for encoding the privacy passphrase. A portion of an SNMP message is encrypted before transmission.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`DES`	Indicate Data Encryption Standard Algorithm.
`AES`	Indicate Advanced Encryption Standard Algorithm.

SecurityName


Description	The user profile name. Enter an alphanumeric string of 1 to 32 characters.
Type	string or null
Read Only	False
Added	iLO6 1.05

UserEngineID


Description	The UserEngineID is combined with the SecurityName to create a SNMPv3 user for each manager. It is only used for creating remote accounts used with INFORM messages. If this property is not set then INFORM message will be sent with default or iLO configured engine ID. This value must be a hexadecimal string with an even number of 10 to 64 characters, excluding the first two characters, 0x (for example, 0x01020304abcdef).
Type	string or null
Read Only	False
Added	iLO6 1.05

HpeSNMPUsersCollection

@odata.type: "#HpeSNMPUsersCollection.HpeSNMPUsersCollection"

A Collection of HpeSNMPUsers resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/snmpservice/snmpusers`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	HpeSNMPUser

Members (array)

Member of HpeSNMPUsersCollection.HpeSNMPUsersCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeSNMPUsersCollection.HpeSNMPUsersCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeSNMPUsersCollection.HpeSNMPUsersCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeTlsConfig

@odata.type: "#HpeTlsConfig.v1_0_0.HpeTlsConfig"

The schema definition for TLS configuration.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/bios/tlsconfig`	GET
`/redfish/v1/systems/{item}/bios/tlsconfig/settings`	GET PATCH

Links to other Resources

Link Name	Destination type
`@Redfish.Settings/SettingsObject`	HpeTlsConfig
`Oem/Hpe/Links/BaseConfigs`	HpeBaseConfigs

@Redfish.Settings

Member of HpeTlsConfig.v1_0_0.HpeTlsConfig See the Redfish standard schema and specification for information on common @Redfish properties.

Certificates (array)

Certificates is an array containing elements of:

Certificates[{item}].FingerPrint Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The fingerprint of the certificate. It is the sha256 (SHA2) of the Der format of the certificate
Type	string
Read Only	True
Added	iLO6 1.05

Certificates[{item}].Issuer Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The Issuer of the certificate
Type	string
Read Only	True
Added	iLO6 1.05

Certificates[{item}].SerialNumber Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The Serial Number of the certificate.
Type	string
Read Only	True
Added	iLO6 1.05

Certificates[{item}].Subject Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The Subject of the certificate.
Type	string
Read Only	True
Added	iLO6 1.05

Certificates[{item}].ValidNotAfter Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The expiration date of the certificate.
Type	string
Read Only	True
Added	iLO6 1.05

Certificates[{item}].ValidNotBefore Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	The date when the certificate becomes valid.
Type	string
Read Only	True
Added	iLO6 1.05

Ciphers


Description	The encryption used. It can have more than one type of encryption, example: "AES128-SHA:AES256-SHA:AES128-SHA256:AES256-SHA256"
Type	string
Read Only	False
Added	iLO6 1.05

DeleteCertificates (array)

DeleteCertificates is an array containing elements of:

DeleteCertificates[{item}].FingerPrint Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	To delete a certificate, the user should place its fingerprint here. The fingerprint would be found as a property under the single certificate object in the "Certificates" array
Type	string
Read Only	False
Added	iLO6 1.05

HostnameCheck


Description	Use this option to enable or disable verification of the connected server's hostname with the hostname in the certificate supplied by the server
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Disable verification of the connected server's hostname.
`Enabled`	enable verification of the connected server's hostname.

NewCertificates (array)

NewCertificates is an array containing elements of:

NewCertificates[{item}].X509Certificate Member of HpeTlsConfig.v1_0_0.HpeTlsConfig


Description	the body (PEM format) of the Certificate to be added
Type	string
Read Only	False
Added	iLO6 1.05

ProtocolVersion


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`AUTO`
`1.0`
`1.1`
`1.2`
`1.3`

TlsCaCertificateCount


Description	The certificates count.
Type	integer
Read Only	False
Added	iLO6 1.05

VerifyMode


Description	It determines if/how the certificates are validated.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value
`NONE`
`PEER`

HpeUSBDevice

@odata.type: "#HpeUSBDevice.v2_0_0.HpeUSBDevice"

The HpeUSBDevice resource describes the properties of USB devices.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/usbdevices/{item}`	GET

DeviceCapacityMB


Description	USB device usable capacity (if applicable) in Mbytes
Type	integer
Read Only	True
Added	iLO6 1.05

DeviceClass


Description	USB device Class code as defined by the USB HID device specification.
Type	integer
Read Only	True
Added	iLO6 1.05

DeviceName


Description	USB device name in UTF-8 format.
Type	string or null
Read Only	True
Added	iLO6 1.05

DeviceProtocol


Description	Protocol code as defined by the USB HID specification.
Type	integer
Read Only	True
Added	iLO6 1.05

DeviceSubClass


Description	USB device SubClass code as defined by the USB HID device specification.
Type	integer
Read Only	True
Added	iLO6 1.05

Location


Description	Location of the USB device on the server
Type	string or null
Read Only	True
Added	iLO6 1.05

ProductID


Description	USB product ID as defined by manufacturer.
Type	integer
Read Only	True
Added	iLO6 1.05

StructuredName


Description	USB device structured name in UTF-8 format.
Type	string or null
Read Only	True
Added	iLO6 1.05

UEFIDevicePath


Description	UEFI device path of USB device. Standardized text representation of the UEFI device path, in UTF-8 format
Type	string or null
Read Only	True
Added	iLO6 1.05

VendorID


Description	Vendor ID of detected USB device.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeUSBDevicesCollection

@odata.type: "#HpeUSBDevicesCollection.HpeUSBDevicesCollection"

A Collection of HpeUSBDevices resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/usbdevices`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HpeUSBDevice

Members (array)

Member of HpeUSBDevicesCollection.HpeUSBDevicesCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HpeUSBDevicesCollection.HpeUSBDevicesCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HpeUSBDevicesCollection.HpeUSBDevicesCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

HpeUSBPort

@odata.type: "#HpeUSBPort.v2_0_0.HpeUSBPort"

The HpeUSBPort resource describes the properties of USB ports.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/usbports/{item}`	GET

InstanceNumber


Description	Instance number of the USB Port
Type	integer
Read Only	True
Added	iLO6 1.05

Location


Description	Location of the USB Device on the server
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Back`	Located on the rear panel of the server.
`Front`	Located on the front bezel of the server.
`Internal`	Located internally within the server chassis.
`InternalManagement`	Internal management media.
`InternalSDCard`	The internal SD-Card slot.
`iLOManagement`	iLO virtual USB devices.

PCIBusNumber


Description	PCI Bus number of the USB controller that controls this USB port
Type	integer
Read Only	True
Added	iLO6 1.05

PCIDeviceNumber


Description	PCI Device Number of the USB Controller that controls this USB Port.
Type	integer
Read Only	True
Added	iLO6 1.05

PCIFunctionNumber


Description	PCI Function Number of the USB Controller that controls this USB Port.
Type	integer
Read Only	True
Added	iLO6 1.05

ParentHubInstance


Description	Parent Hub Instance that provides an instance number of the internal hub this USB Port is connected to.
Type	integer
Read Only	True
Added	iLO6 1.05

SharedCapability


Description	Shared Capability of the USB Port
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`UnsharedManagement`	Not shared as a Management Port.
`SharedManagementPhysicalSwitch`	Shared management port w/ physical switch to control whether muxed to iLO or host.
`SharedManagementPortAutomaticControl`

SpeedCapability


Description	USB speed capability of the USB port as configured by the BIOS during POST.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`USB1FullSpeed`	USB 1.0 Full Speed
`USB2HighSpeed`	USB 2.0 High Speed
`USB3SuperSpeed`	USB 3.x SuperSpeed

UEFIDevicePath