Other resource definitions of iLO 6 v1.45


Description	The interval of time in seconds between the last failed login attempt and reset of the lockout threshold counter. This value must be less than or equal to AccountLockoutDuration. Reset sets the counter to zero.
Type	number
Read Only	True
Added	iLO6 1.05

AccountLockoutCounterResetEnabled


Description	The value indicates whether the threshold counter will be reset after AccountLockoutCounterResetAfter expires.
Type	boolean
Read Only	True
Added	iLO6 1.05

AccountLockoutDuration


Description	The time in seconds an account is locked out. The value must be greater than or equal to the value of the AccountLockoutCounterResetAfter property. If set to 0, no lockout occurs.
Type	number or null
Read Only	False
Added	iLO6 1.05

AccountLockoutThreshold


Description	The number of failed login attempts allowed before a user account is locked for a specified duration. A value of 0 means it is never locked.
Type	number or null
Read Only	False
Added	iLO6 1.05

Accounts

This property references a resource of type Collection with a MemberType of ManagerAccount. Accounts is a link ("@odata.id": URI) to another resource.

ActiveDirectory

ActiveDirectory.AccountProviderType Member of AccountService.v1_5_0.AccountService


Description	This property contains the type of external account provider this resource references.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ActiveDirectoryService`	An external Active Directory Service.

ActiveDirectory.Authentication ActiveDirectory.Authentication.AuthenticationType Member of AccountService.v1_5_0.AccountService


Description	This property contains the type of authentication used to connect to the external account provider.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`UsernameAndPassword`	Username and password combination.

ActiveDirectory.Authentication.Password Member of AccountService.v1_5_0.AccountService


Description	This property is used with a PATCH or PUT to write the password for the account service. This property is null on a GET.
Type	string or null
Read Only	False
Added	iLO6 1.05

ActiveDirectory.Authentication.Username Member of AccountService.v1_5_0.AccountService


Description	This property contains the distinguished name for the account service.
Type	string or null
Read Only	False
Added	iLO6 1.05

ActiveDirectory.RemoteRoleMapping (array) Member of AccountService.v1_5_0.AccountService

RemoteRoleMapping is an array containing elements of:

RemoteRoleMapping[{item}].LocalRole Member of AccountService.v1_5_0.AccountService


Description	The name of the local role in which to map the remote user or group.
Type	string or null
Read Only	False
Added	iLO6 1.05

RemoteRoleMapping[{item}].RemoteGroup Member of AccountService.v1_5_0.AccountService


Description	This property is the name of the remote group (or in the case of a Redfish Service, remote role) that will be mapped to the local role referenced by this entity.
Type	string or null
Read Only	False
Added	iLO6 1.05

ActiveDirectory.ServiceAddresses (array) Member of AccountService.v1_5_0.AccountService

ServiceAddresses is an array containing elements of:

ServiceAddresses[{item}] Member of AccountService.v1_5_0.AccountService


Type	string or null
Read Only	True
Added	iLO6 1.05

ActiveDirectory.ServiceEnabled Member of AccountService.v1_5_0.AccountService


Description	This indicates whether this service is enabled.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

AuthFailureLoggingThreshold


Description	The number of authorization failures allowed before the failure attempt is logged to the manager log.
Type	number
Read Only	False
Added	iLO6 1.05

LDAP

LDAP.AccountProviderType Member of AccountService.v1_5_0.AccountService


Description	This property contains the type of external account provider this resource references.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ActiveDirectoryService`	An external Active Directory Service.
`LDAPService`	A generic external LDAP Service.

LDAP.Authentication LDAP.Authentication.AuthenticationType Member of AccountService.v1_5_0.AccountService


Description	This property contains the type of authentication used to connect to the external account provider.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`UsernameAndPassword`	Username and password combination.

LDAP.Authentication.Password Member of AccountService.v1_5_0.AccountService


Description	This property is used with a PATCH or PUT to write the password for the account service. This property is null on a GET.
Type	string or null
Read Only	False
Added	iLO6 1.05

LDAP.Authentication.Username Member of AccountService.v1_5_0.AccountService


Description	This property contains the distinguished name for the account service.
Type	string or null
Read Only	False
Added	iLO6 1.05

LDAP.Certificates A link to a collection of Certificates used for the external account service. Certificates is a link ("@odata.id": URI) to another resource.

LDAP.LDAPService LDAP.LDAPService.SearchSettings LDAP.LDAPService.SearchSettings.BaseDistinguishedNames (array) Member of AccountService.v1_5_0.AccountService

BaseDistinguishedNames is an array containing elements of:

BaseDistinguishedNames[{item}] Member of AccountService.v1_5_0.AccountService


Type	string or null
Read Only	True
Added	iLO6 1.05

LDAP.RemoteRoleMapping (array) Member of AccountService.v1_5_0.AccountService

RemoteRoleMapping is an array containing elements of:

RemoteRoleMapping[{item}].LocalRole Member of AccountService.v1_5_0.AccountService


Description	The name of the local role in which to map the remote user or group.
Type	string or null
Read Only	False
Added	iLO6 1.05

RemoteRoleMapping[{item}].RemoteGroup Member of AccountService.v1_5_0.AccountService


Description	This property is the name of the remote group (or in the case of a Redfish Service, remote role) that will be mapped to the local role referenced by this entity.
Type	string or null
Read Only	False
Added	iLO6 1.05

LDAP.ServiceAddresses (array) Member of AccountService.v1_5_0.AccountService

ServiceAddresses is an array containing elements of:

ServiceAddresses[{item}] Member of AccountService.v1_5_0.AccountService


Type	string or null
Read Only	True
Added	iLO6 1.05

LDAP.ServiceEnabled Member of AccountService.v1_5_0.AccountService


Description	This indicates whether this service is enabled.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

LocalAccountAuth


Description	Controls when this service will use the accounts defined withing this AccountService as part of authentication.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	Authentication via accounts defined in this AccountService is enabled.
`Disabled`	Authentication via accounts defined in this AccountService is disabled.

MaxPasswordLength


Description	The maximum password length for this service.
Type	number
Read Only	True
Added	iLO6 1.05

MinPasswordLength


Description	The minimum password length for this account service.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.AuthFailureDelayTimeSeconds


Description	The time in seconds to delay for each failure after AuthFailuresBeforeDelay authentication attempts have failed. Values of 2, 5, 10, and 30 seconds are valid.
Type	integer
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value
`2`
`5`
`10`
`30`

Oem.Hpe.AuthFailureLoggingThreshold


Description	This property enables you to view and configure logging criteria for failed authentications. A failed login log entry is recorded after the configured number of attempts. 0 = feature disabled; 1-3 and 5 are allowable values.
Type	integer
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value
`Null`
`1`
`2`
`3`
`5`

Oem.Hpe.AuthFailuresBeforeDelay


Description	The number of failed authentication attempts allowed before authentication is delayed by AuthFailureDelayTimeSeconds. Values of 0, 1, 3, and 5 are valid, with 0 indicating delay after every authentication failure.
Type	integer
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value
`Null`
`1`
`3`
`5`

Oem.Hpe.DefaultPassword


Description	The default password used to log in to the management processor when factory reset is performed.
Type	string or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.DefaultUserName


Description	The default name used to log in to the management processor when factory reset is performed.
Type	string or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.DirectorySettings

Oem.Hpe.DirectorySettings.LdapAuthenticationMode Member of AccountService.v1_5_0.AccountService


Description	Represents the LDAP authentication mode.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Disabled`	Directory authentication is disabled.
`DefaultSchema`	Directory Default schema or Schema-free option is selected.
`ExtendedSchema`	HPE Extended schema is selected.

Oem.Hpe.DirectorySettings.LdapCaCertificateLoaded Member of AccountService.v1_5_0.AccountService


Description	Represents if the directory server CA certificate is loaded or not.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.DirectorySettings.LdapCaCertificates A link to a collection of Certificates. LdapCaCertificates is a link ("@odata.id": URI) to another resource.

Oem.Hpe.DirectorySettings.LdapServerPort Member of AccountService.v1_5_0.AccountService


Description	Represents the port number of the directory server.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.DirectoryTest

The value of this property shall be a reference to a resource of type HpeDirectoryTest. DirectoryTest is a link ("@odata.id": URI) to another resource.

Oem.Hpe.EnforcePasswordComplexity


Description	Enforce complexity rules when a user password is set or changed. Three of four character classes must be present; ASCII UPPERCASE, LOWERCASE, DIGITS, and Other
Type	boolean
Read Only	False
Added	iLO6 1.05

Oem.Hpe.KerberosSettings

Oem.Hpe.KerberosSettings.KDCServerPort Member of AccountService.v1_5_0.AccountService


Description	Represents the port number of the KDC server.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.KerberosSettings.KerberosRealm Member of AccountService.v1_5_0.AccountService


Description	Represents the Realm of the KDC server.
Type	string or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.MinPasswordLength


Description	This property specifies the minimum number of characters allowed when a user password is set or changed. It must be a value from 0 to 39.
Type	integer
Read Only	False
Added	iLO6 1.05

Roles

A link to a collection of Roles. Roles is a link ("@odata.id": URI) to another resource.

Actions

HpeiLOAccountService.ImportKerberosKeytab Member of AccountService.v1_5_0.AccountService Import the Kerberos keytab file.

Parameters:

ImportUri (string)

URI of the kerberos keytab file.

BootOption

@odata.type: "#BootOption.v1_0_1.BootOption"

This is the schema definition for the BootOption resource. It represents the properties of a bootable device available in the System.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/bootoptions/{item}`	GET

Alias


Description	The alias of this Boot Source.
Type	string or null
Read Only	True
Added	iLO6 1.05

BootOptionEnabled


Description	A flag that shows if the Boot Option is enabled.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

BootOptionReference


Description	The unique boot option string that is referenced in the BootOrder.
Type	string or null
Read Only	True
Added	iLO6 1.05

DisplayName


Description	The user-readable display string of the Boot Option.
Type	string or null
Read Only	True
Added	iLO6 1.05

UefiDevicePath


Description	The UEFI device path used to access this UEFI Boot Option.
Type	string or null
Read Only	True
Added	iLO6 1.05

BootOptionCollection

@odata.type: "#BootOptionCollection.BootOptionCollection"

A Collection of BootOption resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/bootoptions`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	BootOption

Members (array)

Member of BootOptionCollection.BootOptionCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of BootOptionCollection.BootOptionCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of BootOptionCollection.BootOptionCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

Certificate

@odata.type: "#Certificate.v1_6_0.Certificate"

The Certificate resource describes an X509 certificate.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/externalaccountproviders/ldap/certificates/{item}`	GET PATCH DELETE
`/redfish/v1/managers/{item}/securityservice/iloidevid/certificates/{item}`	GET
`/redfish/v1/managers/{item}/securityservice/iloldevid/certificates/{item}`	GET POST DELETE
`/redfish/v1/managers/{item}/securityservice/platformcert/certificates/{item}`	GET
`/redfish/v1/managers/{item}/securityservice/systemiak/certificates/{item}`	GET
`/redfish/v1/managers/{item}/securityservice/systemidevid/certificates/{item}`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/db/certificates/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbdefault/certificates/{item}`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbr/certificates/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbrdefault/certificates/{item}`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbt/certificates/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbtdefault/certificates/{item}`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbx/certificates/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbxdefault/certificates/{item}`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/kek/certificates/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/kekdefault/certificates/{item}`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/pk/certificates/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/pkdefault/certificates/{item}`	GET

CertificateString


Description	Contains PEM formatted X509 certificate or PKCS7 certificate chain (Base64 encoded).
Type	string
Read Only	False
Added	iLO6 1.05
Format	text

CertificateType


Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`PEM`	A PEM encoded certificate.
`PKCS7`	A PEM encoded PKCS7 certificate.

Issuer

Issuer.City Member of Certificate.v1_6_0.Certificate


Description	The city or locality of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Issuer.CommonName Member of Certificate.v1_6_0.Certificate


Description	The fully qualified domain name of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Issuer.Country Member of Certificate.v1_6_0.Certificate


Description	The country of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Issuer.DisplayString Member of Certificate.v1_6_0.Certificate


Description	A human-readable string for this identifier.
Type	string or null
Read Only	True
Added	iLO6 1.10

Issuer.Email Member of Certificate.v1_6_0.Certificate


Description	The email address of the contact within the organization of the entity.
Type	string or null
Read Only	True
Added	iLO6 1.10

Issuer.Organization Member of Certificate.v1_6_0.Certificate


Description	The name of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Issuer.OrganizationalUnit Member of Certificate.v1_6_0.Certificate


Description	The name of the unit or division of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Issuer.State Member of Certificate.v1_6_0.Certificate


Description	The state, province, or region of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

SerialNumber


Description	The serial number that the Certificate Authority assigned to the certificate.
Type	string
Read Only	True
Added	iLO6 1.05

Subject

Subject.City Member of Certificate.v1_6_0.Certificate


Description	The city or locality of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Subject.CommonName Member of Certificate.v1_6_0.Certificate


Description	The fully qualified domain name of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Subject.Country Member of Certificate.v1_6_0.Certificate


Description	The country of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Subject.DisplayString Member of Certificate.v1_6_0.Certificate


Description	A human-readable string for this identifier.
Type	string or null
Read Only	True
Added	iLO6 1.10

Subject.Email Member of Certificate.v1_6_0.Certificate


Description	The email address of the contact within the organization of the entity.
Type	string or null
Read Only	True
Added	iLO6 1.10

Subject.Organization Member of Certificate.v1_6_0.Certificate


Description	The name of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Subject.OrganizationalUnit Member of Certificate.v1_6_0.Certificate


Description	The name of the unit or division of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

Subject.State Member of Certificate.v1_6_0.Certificate


Description	The state, province, or region of the organization of the entity.
Type	string
Read Only	True
Added	iLO6 1.10

UefiSignatureOwner


Description	The UEFI signature owner for this certificate.
Type	string or null
Read Only	True
Added	iLO6 1.05

ValidNotAfter


Description	The date on which the certificate validity period ends.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

ValidNotBefore


Description	The date on which the certificate validity period begins.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

CertificateCollection

@odata.type: "#CertificateCollection.CertificateCollection"

A Collection of Certificate resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/externalaccountproviders/ldap/certificates`	GET POST
`/redfish/v1/managers/{item}/securityservice/iloidevid/certificates`	GET
`/redfish/v1/managers/{item}/securityservice/iloldevid/certificates`	GET POST
`/redfish/v1/managers/{item}/securityservice/platformcert/certificates`	GET
`/redfish/v1/managers/{item}/securityservice/systemiak/certificates`	GET
`/redfish/v1/managers/{item}/securityservice/systemidevid/certificates`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/db/certificates`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbdefault/certificates`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbr/certificates`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbrdefault/certificates`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbt/certificates`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbtdefault/certificates`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbx/certificates`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbxdefault/certificates`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/kek/certificates`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/kekdefault/certificates`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/pk/certificates`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/pkdefault/certificates`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	Certificate

Members (array)

Member of CertificateCollection.CertificateCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of CertificateCollection.CertificateCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of CertificateCollection.CertificateCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

CertificateLocations

@odata.type: "#CertificateLocations.v1_0_2.CertificateLocations"

The CertificateLocations schema describes a Resource that an administrator can use in order to locate all certificates installed on a given service.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/certificateservice/certificatelocations`	GET

CertificateService

@odata.type: "#CertificateService.v1_0_3.CertificateService"

The CertificateService schema describes a certificate service that represents the actions available to manage certificates and links to the certificates.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/certificateservice`	GET POST

Links to other Resources

Link Name	Destination type
`Links/CertificateLocations`	CertificateLocations

CertificateLocations

The information about the location of certificates. CertificateLocations is a link ("@odata.id": URI) to another resource.

Actions

CertificateService.GenerateCSR Member of CertificateService.v1_0_3.CertificateService

Parameters:

City (string)

The city or locality of the organization making the request.

GivenName (string)

The given name of the user making the request.

KeyPairAlgorithm (string)

The type of key-pair for use with signing algorithms.

CertificateCollection (object)

The link to the certificate collection where the certificate is installed after the certificate authority (CA) signs the certificate.

Country (string)

The two-letter country code of the organization making the request.

KeyCurveId (string)

The curve ID to use with the key, if needed based on the KeyPairAlgorithm parameter value.

CommonName (string)

The fully qualified domain name of the component to secure.

State (string)

The state, province, or region of the organization making the request.

ContactPerson (string)

The name of the user making the request.

Email (string)

The email address of the contact within the organization making the request.

Surname (string)

The surname of the user making the request.

KeyUsage (array)

The usage of the key contained in the certificate.

UnstructuredName (string)

The unstructured name of the subject.

KeyBitLength (integer)

The length of the key, in bits, if needed based on the KeyPairAlgorithm parameter value.

Organization (string)

The name of the organization making the request.

AlternativeNames (array)

The additional host names of the component to secure.

ChallengePassword (string)

The challenge password to apply to the certificate for revocation requests.

OrganizationalUnit (string)

The name of the unit or division of the organization making the request.

Initials (string)

The initials of the user making the request.

ComponentIntegrity

@odata.type: "#ComponentIntegrity.v1_2_0.ComponentIntegrity"

The ComponentIntegrity resource provides critical and pertinent security information about a specific device, system, software element, or other managed entity.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/ComponentIntegrity/{item}`	GET POST

ComponentIntegrityEnabled

Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	An indication of whether security protocols are enabled for the component.
Type	boolean
Read Only	False
Added	iLO6 1.10

ComponentIntegrityType

Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Type	string
Read Only	True
Added	iLO6 1.10

The following are the supported values:

Value	Description
`SPDM`	Security Protocol and Data Model (SPDM) protocol.
`TPM`	Trusted Platform Module (TPM).
`OEM`	OEM-specific.

ComponentIntegrityTypeVersion

Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The version of the security technology.
Type	string
Read Only	True
Added	iLO6 1.10

SPDM

SPDM.IdentityAuthentication SPDM.IdentityAuthentication.ResponderAuthentication SPDM.IdentityAuthentication.ResponderAuthentication.VerificationStatus Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The status of the verification of the identity of the component.
Type	string or null
Read Only	True
Added	iLO6 1.10

The following are the supported values:

Value	Description
`Success`	Successful verification.
`Failed`	Unsuccessful verification.

SPDM.MeasurementSet SPDM.MeasurementSet.MeasurementSpecification Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Type	string
Read Only	True
Added	iLO6 1.45

The following are the supported values:

Value	Description
`DMTF`	DMTF.

SPDM.MeasurementSet.Measurements (array) Member of ComponentIntegrity.v1_2_0.ComponentIntegrity

Measurements is an array containing elements of:

Measurements[{item}].LastUpdated Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The date and time when information for the measurement was last updated.
Type	string or null
Read Only	True
Added	iLO6 1.40
Format	date-time

Measurements[{item}].Measurement Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The measurement data.
Type	string or null
Read Only	True
Added	iLO6 1.40

Measurements[{item}].MeasurementHashAlgorithm Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The hash algorithm used to compute the measurement.
Type	string or null
Read Only	True
Added	iLO6 1.40

Measurements[{item}].MeasurementIndex Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The index of the measurement.
Type	integer or null
Read Only	True
Added	iLO6 1.45

Measurements[{item}].MeasurementType Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Type	string or null
Read Only	True
Added	iLO6 1.45

The following are the supported values:

Value	Description
`ImmutableROM`	Immutable ROM.
`MutableFirmware`	Mutable firmware or any mutable code.
`HardwareConfiguration`	Hardware configuration, such as straps.
`FirmwareConfiguration`	Firmware configuration, such as configurable firmware policy.
`MutableFirmwareVersion`	Mutable firmware version.
`MutableFirmwareSecurityVersionNumber`	Mutable firmware security version number.
`MeasurementManifest`	Measurement Manifest.

Measurements[{item}].SecurityVersionNumber Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The security version number the measurement represents.
Type	string or null
Read Only	True
Added	iLO6 1.45

Status

Member of ComponentIntegrity.v1_2_0.ComponentIntegrity See the Redfish standard schema and specification for information on common Status object.

TPM

TPM.ComponentCommunication TPM.ComponentCommunication.Sessions (array) Member of ComponentIntegrity.v1_2_0.ComponentIntegrity

Sessions is an array containing elements of:

Sessions[{item}].SessionId Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The identifier for an active session or communication channel between two components.
Type	integer or null
Read Only	True
Added	iLO6 1.40

Sessions[{item}].SessionType Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Type	string
Read Only	True
Added	iLO6 1.40

The following are the supported values:

Value	Description
`Plain`	A plain text session without any protection.
`EncryptedAuthenticated`	An established session where both encryption and authentication are protecting the communication.
`AuthenticatedOnly`	An established session where only authentication is protecting the communication.

TPM.MeasurementSet TPM.MeasurementSet.Measurements (array) Member of ComponentIntegrity.v1_2_0.ComponentIntegrity

Measurements is an array containing elements of:

Measurements[{item}].LastUpdated Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The date and time when information for the measurement was last updated.
Type	string or null
Read Only	True
Added	iLO6 1.40
Format	date-time

Measurements[{item}].Measurement Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The measurement data.
Type	string or null
Read Only	True
Added	iLO6 1.40

Measurements[{item}].MeasurementHashAlgorithm Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The hash algorithm used to compute the measurement.
Type	string or null
Read Only	True
Added	iLO6 1.40

Measurements[{item}].PCR Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The Platform Configuration Register (PCR) bank of the measurement.
Type	integer or null
Read Only	True
Added	iLO6 1.40

TPM.NonceSizeBytesMaximum Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The maximum number of bytes that can be specified in the Nonce parameter of the TPMGetSignedMeasurements action.
Type	integer or null
Read Only	True
Added	iLO6 1.40

TargetComponentURI

Member of ComponentIntegrity.v1_2_0.ComponentIntegrity


Description	The link to the the component whose integrity that this resource reports.
Type	string
Read Only	True
Added	iLO6 1.10

Actions

ComponentIntegrity.TPMGetSignedMeasurements Member of ComponentIntegrity.v1_2_0.ComponentIntegrity This action gets the TPM Signed Measurements.

Parameters:

Nonce (string)

A set of bytes as a hex-encoded string that is signed with the measurements. The value should be unique.

title (string)

Friendly action name

target (string)

Link to invoke action

PCRSelection (string)

An object that identify the PCRs to sign.

ComponentIntegrity.SPDMGetSignedMeasurements Member of ComponentIntegrity.v1_2_0.ComponentIntegrity This action gets the SPDM Signed Measurements.

Parameters:

Nonce (string)

A set of bytes as a hex-encoded string that is signed with the measurements. The value should be unique.

target (string)

Link to invoke action

title (string)

Friendly action name

SlotId (integer)

The slot identifier for the certificate containing the private key to generate the signature over the measurements.

MeasurementIndices (array)

An array of indices that identify the measurement blocks to sign.

ComponentIntegrityCollection

@odata.type: "#ComponentIntegrityCollection.ComponentIntegrityCollection"

A Collection of ComponentIntegrity resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/ComponentIntegrity`	GET PATCH

Links to other Resources

Link Name	Destination type
`Members[]`	ComponentIntegrity

Members (array)

Member of ComponentIntegrityCollection.ComponentIntegrityCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of ComponentIntegrityCollection.ComponentIntegrityCollection


Type	string
Read Only	True
Added	iLO6 1.10
Format	uri-reference

Members@odata.count

Member of ComponentIntegrityCollection.ComponentIntegrityCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.10

EventDestination

@odata.type: "#EventDestination.v1_12_0.EventDestination"

The EventDestination resource describes the target of an event subscription, including the types of events subscribed and context to provide to the target in the Event payload.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/eventservice/subscriptions/{item}`	GET PATCH DELETE

Context

Member of EventDestination.v1_12_0.EventDestination


Description	A client-supplied string that is stored with the listener destination subscription.
Type	string
Read Only	False
Added	iLO6 1.05

Destination

Member of EventDestination.v1_12_0.EventDestination


Description	The URI of the destination listener service.
Type	string
Read Only	False
Added	iLO6 1.05
Format	uri-reference

HttpHeaders (array)

Member of EventDestination.v1_12_0.EventDestination

HttpHeaders is an array containing elements of:

HttpHeaders[{item}]

Oem.Hpe.DeliveryRetryAttempts

Member of EventDestination.v1_12_0.EventDestination


Description	This is the number of attempts an event posting is retried before the subscription is terminated.
Type	integer
Read Only	False
Added	iLO6 1.05

Oem.Hpe.DeliveryRetryIntervalInSeconds

Member of EventDestination.v1_12_0.EventDestination


Description	This represents the number of seconds between retry attempts for sending any given Event
Type	integer
Read Only	False
Added	iLO6 1.05

Oem.Hpe.MutualAuthenticationEnabled

Member of EventDestination.v1_12_0.EventDestination


Description	This represents if the subscriber and iLO need to perform mutual authentication when an event is sent.
Type	boolean
Read Only	False
Added	iLO6 1.05

Oem.Hpe.RequestedMaxEventsToQueue

Member of EventDestination.v1_12_0.EventDestination


Description	This represents the number of events the service should queue.
Type	integer
Read Only	False
Added	iLO6 1.05

Oem.Hpe.RetireOldEventInMinutes

Member of EventDestination.v1_12_0.EventDestination


Description	This represents the number of minutes until an event is expired.
Type	integer
Read Only	False
Added	iLO6 1.05

Protocol

Member of EventDestination.v1_12_0.EventDestination


Description	The protocol type of the event connection.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Redfish`

RegistryPrefixes (array)

Member of EventDestination.v1_12_0.EventDestination

RegistryPrefixes is an array containing elements of:

RegistryPrefixes[{item}] Member of EventDestination.v1_12_0.EventDestination


Type	string or null
Read Only	True
Added	iLO6 1.05

SubscriptionType

Member of EventDestination.v1_12_0.EventDestination


Description	The subscription type for events.
Type	string or null
Read Only	True
Added	iLO6 1.20

The following are the supported values:

Value
`RedfishEvent`

EventDestinationCollection

@odata.type: "#EventDestinationCollection.EventDestinationCollection"

A Collection of EventDestination resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/eventservice/subscriptions`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	EventDestination

Members (array)

Member of EventDestinationCollection.EventDestinationCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of EventDestinationCollection.EventDestinationCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of EventDestinationCollection.EventDestinationCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

EventService

@odata.type: "#EventService.v1_7_2.EventService"

The EventService resource describes the Event Service. It represents the properties for the service itself and has links to the actual list of subscriptions.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/eventservice`	GET POST

Links to other Resources

Link Name	Destination type
`Subscriptions`	Collection of EventDestination
`Oem/Hpe/CACertificates`	Collection of HpeCertificate

DeliveryRetryAttempts


Description	This is the number of attempts an event posting is retried before the subscription is terminated.
Type	integer
Read Only	False
Added	iLO6 1.05

DeliveryRetryIntervalSeconds


Description	This represents the number of seconds between retry attempts for sending any given Event
Type	integer
Read Only	False
Added	iLO6 1.05

EventTypesForSubscription (array)

EventTypesForSubscription is an array containing elements of:

EventTypesForSubscription[{item}] Member of EventService.v1_7_2.EventService


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`StatusChange`	The status of this resource has changed
`ResourceUpdated`	The value of this resource has been updated
`ResourceAdded`	A resource has been added
`ResourceRemoved`	A resource has been removed
`Alert`	A condition exists which requires attention

Oem.Hpe.CACertificates

The value of this property shall be a reference to a Collection of HpeCertificate resources. CACertificates is a link ("@odata.id": URI) to another resource.

Oem.Hpe.RequestedMaxEventsToQueueDefault


Description	This represents the default number of events the service should queue.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.RetireOldEventInMinutesDefault


Description	This represents the default number of minutes until an event is expired.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.TTLCountDefault


Description	The default number of TTLUnits until this listener destination subscription expires. It may be renewed prior to expire to reset the Time to Live counter. The value 999999 is reserved to mean a perpetual subscription.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.TTLUnitsDefault


Description	The default time unit used to measure the subscription time of this listener destination. This is the units for TTLCount and is used to express the subscription lifetime of the listener destination.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`seconds`	Time to Live (TTL) in Seconds
`minutes`	Time to Live (TTL) in Minutes
`days`	Time to Live (TTL) in Days

RegistryPrefixes (array)

RegistryPrefixes is an array containing elements of:

RegistryPrefixes[{item}] Member of EventService.v1_7_2.EventService


Type	string or null
Read Only	True
Added	iLO6 1.05

ServiceEnabled


Description	This indicates whether this service is enabled.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Status

Member of EventService.v1_7_2.EventService See the Redfish standard schema and specification for information on common Status object.

Subscriptions

This is a reference to a collection of ListenerDestination resources. Subscriptions is a link ("@odata.id": URI) to another resource.

Actions

EventService.SubmitTestEvent Member of EventService.v1_7_2.EventService

Parameters:

EventId (string)

Severity (string)

Value	Description
OK
Warning
Critical

EventType (string)

Value	Description
StatusChange
ResourceUpdated
ResourceAdded
ResourceRemoved
Alert

OriginOfCondition (string)

EventTimestamp (string)

MessageId (string)

Message (string)

MessageArgs (array)

HpeEventService.ImportCACertificate Member of EventService.v1_7_2.EventService Imports a Trusted CA Certificate

Parameters:

Certificate (string)

Contains PEM formatted X509 certificate or PKCS7 certificate chain (Base64 encoded).

HostInterface

@odata.type: "#HostInterface.v1_1_1.HostInterface"

The HostInterface resource describes a Redfish Host Interface, which is a method of accessing the Redfish API from the host computer system.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/hostinterfaces/{item}`	GET PATCH

AuthenticationModes (array)

AuthenticationModes is an array containing elements of:

AuthenticationModes[{item}].AuthenticationMode Member of HostInterface.v1_1_1.HostInterface


Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`AuthNone`	Requests without any sort of authentication are allowed.
`BasicAuth`	Requests using HTTP Basic Authentication are allowed.
`RedfishSessionAuth`	Requests using Redfish Session Authentication are allowed.
`OemAuth`	Requests using OEM authentication mechanisms are allowed.

ExternallyAccessible


Description	This indicates whether this interface is accessible by external entities.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

FirmwareAuthEnabled


Description	This indicates whether this firmware authentication is enabled for this interface.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

FirmwareAuthRoleId


Description	This property contains the Role for firmware authentication on this interface.
Type	string
Read Only	False
Added	iLO6 1.05

HostEthernetInterfaces

This is a reference to a collection of NICs that Computer Systems use for network communication with this Host Interface. HostEthernetInterfaces is a link ("@odata.id": URI) to another resource.

HostEthernetInterfaces property is not supported in iLO5.

HostInterfaceType


Description	This indicates the Host Interface type for this interface.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`NetworkHostInterface`	This interface is a Network Host Interface.

InterfaceEnabled


Description	This indicates whether this interface is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.05

KernelAuthEnabled


Description	This indicates whether this kernel authentication is enabled for this interface.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

KernelAuthRoleId


Description	This property contains the Role for kernel authentication on this interface.
Type	string
Read Only	False
Added	iLO6 1.05

ManagerEthernetInterface

This is a reference to a single NIC that this Manager uses for network communication with this Host Interface. ManagerEthernetInterface is a link ("@odata.id": URI) to another resource.

NetworkProtocol

This is a reference to the network services and their settings that the Manager controls. It is here that clients will find network configuration options as well as network services. NetworkProtocol is a link ("@odata.id": URI) to another resource.

Status

Member of HostInterface.v1_1_1.HostInterface See the Redfish standard schema and specification for information on common Status object.

HostInterfaceCollection

@odata.type: "#HostInterfaceCollection.HostInterfaceCollection"

A Collection of HostInterface resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/hostinterfaces`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	HostInterface

Members (array)

Member of HostInterfaceCollection.HostInterfaceCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of HostInterfaceCollection.HostInterfaceCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of HostInterfaceCollection.HostInterfaceCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

JsonSchemaFile

@odata.type: "#JsonSchemaFile.v1_0_4.JsonSchemaFile"

The JSON Schema File resource describes the location (URI) of a particular Redfish schema definition being implemented or referenced by a Redfish service.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/jsonschemas/{item}`	GET

Languages (array)

Member of JsonSchemaFile.v1_0_4.JsonSchemaFile

Languages is an array containing elements of:

Languages[{item}] Member of JsonSchemaFile.v1_0_4.JsonSchemaFile


Type	string
Read Only	True
Added	iLO6 1.05

Location (array)

Member of JsonSchemaFile.v1_0_4.JsonSchemaFile

Location is an array containing elements of:

Location[{item}].Language Member of JsonSchemaFile.v1_0_4.JsonSchemaFile


Description	The RFC 5646 language code for this schema or registry item.
Type	string
Read Only	True
Added	iLO6 1.05

Location[{item}].Uri Member of JsonSchemaFile.v1_0_4.JsonSchemaFile


Description	Link to locally available URI for schema.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Schema

Member of JsonSchemaFile.v1_0_4.JsonSchemaFile


Description	The typename this schema describes.
Type	string
Read Only	True
Added	iLO6 1.05

JsonSchemaFileCollection

@odata.type: "#JsonSchemaFileCollection.JsonSchemaFileCollection"

A Collection of JsonSchemaFile resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/jsonschemas`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	JsonSchemaFile

Members (array)

Member of JsonSchemaFileCollection.JsonSchemaFileCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of JsonSchemaFileCollection.JsonSchemaFileCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of JsonSchemaFileCollection.JsonSchemaFileCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

LogEntry

@odata.type: "#LogEntry.v1_11_0.LogEntry"

This resource defines the record format for a log. It is designed to be used for SEL logs (from IPMI) as well as Event Logs and OEM-specific log formats. The EntryType field indicates the type of log and the resource includes several additional properties dependent on the EntryType.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/logservices/iel/entries/{item}`	GET
`/redfish/v1/managers/{item}/remotesupportservice/serviceeventlogs/{item}`	GET
`/redfish/v1/systems/{item}/logservices/dpu/entries/{item}`	GET PATCH
`/redfish/v1/systems/{item}/logservices/event/entries/{item}`	GET
`/redfish/v1/systems/{item}/logservices/iml/entries/{item}`	GET PATCH
`/redfish/v1/systems/{item}/logservices/sl/entries/{item}`	GET

Created


Description	The date and time when the log entry was created, for example, 2014-04-15T00:38:00Z.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

EntryType


Description	The log entry type.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Oem`

EventId


Description	The unique instance identifier for an event.
Type	string
Read Only	True
Added	iLO6 1.05

EventTimestamp


Description	The date and time when the event occurred.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Message


Description	The log entry details.
Type	string
Read Only	True
Added	iLO6 1.05

MessageArgs (array)

MessageArgs is an array containing elements of:

MessageArgs[{item}] Member of LogEntry.v1_11_0.LogEntry


Type	string
Read Only	True
Added	iLO6 1.05

MessageId


Description	The MessageId, event data, or OEM-specific information. This property decodes from the entry type. If the entry type is `Event`, this property contains a Redfish Specification-defined MessageId. If the entry type is `SEL`, this property contains the Event Data. Otherwise, this property contains OEM-specific information.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Categories (array)

Categories is an array containing elements of:

Categories[{item}] Member of LogEntry.v1_11_0.LogEntry


Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Security`
`Hardware`
`Firmware`
`Maintenance`
`Administration`
`Power`
`Cooling`
`Invalid User Input`
`Other`
`Configuration`

Oem.Hpe.Class


Description	The log entry event class.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.ClassDescription


Description	The log entry event class description.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Code


Description	The log entry event code.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Count


Description	The occurrence count of the log entry.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Destination


Description	The destination host name or IP address of the remote server that recevied the service event.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EventNumber


Description	The event log identification number. Events are numbered in the order in which they are generated.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Identifier


Description	The unique identifier of the service event.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LearnMoreLink


Description	The link to troubleshooting information.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Oem.Hpe.RecommendedAction


Description	The recommended action for the event.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Repaired


Description	The repaired status of the IML event.
Type	boolean
Read Only	False
Added	iLO6 1.05

Oem.Hpe.ServiceEvent


Description	This indicates a service ticket to be raised for the corresponding event log.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.ServiceEventMessageID


Description	This property represents the Embedded Remote Support Message ID. It is applicable only for a Service Event log.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Severity


Description	The log entry event Severity.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Informational`	Informational event
`Caution`	Caution event
`Critical`	Critical event
`Repaired`	Critical or Caution event repaired

Oem.Hpe.SubmitStatus


Description	The service event log submission status .
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Updated


Description	The date and time of the latest log entry update, for example, 2014-04-15T00:38:00Z.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Oem.Hpe.UserAction


Description	The User action for the event.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Repaired`	The event repaired by user.
`Ignored`	The event ignored by user.
`None`	No user action taken on the event.
`Not Applicable`	User action not applicable for the event.

OemRecordFormat


Description	The format of an OEM record.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Hpe-IML`
`Hpe-iLOEventLog`
`Hpe-SL`
`Hpe-Event`

Severity


Description	The log entry severity.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`OK`
`Warning`
`Critical`

LogEntryCollection

@odata.type: "#LogEntryCollection.LogEntryCollection"

A Collection of LogEntry resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/logservices/iel/entries`	GET POST
`/redfish/v1/managers/{item}/remotesupportservice/serviceeventlogs`	GET
`/redfish/v1/systems/{item}/logservices/dpu/entries`	GET POST
`/redfish/v1/systems/{item}/logservices/event/entries`	GET POST
`/redfish/v1/systems/{item}/logservices/iml/entries`	GET POST
`/redfish/v1/systems/{item}/logservices/sl/entries`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	LogEntry

Members (array)

Member of LogEntryCollection.LogEntryCollection

Members is an array containing elements of:

Members[{item}].@odata.context Member of LogEntryCollection.LogEntryCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members[{item}].@odata.etag Member of LogEntryCollection.LogEntryCollection


Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].@odata.id Member of LogEntryCollection.LogEntryCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members[{item}].@odata.type Member of LogEntryCollection.LogEntryCollection


Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].Created Member of LogEntryCollection.LogEntryCollection


Description	The date and time when the log entry was created, for example, 2014-04-15T00:38:00Z.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Members[{item}].EntryType Member of LogEntryCollection.LogEntryCollection


Description	The log entry type.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Oem`

Members[{item}].EventId Member of LogEntryCollection.LogEntryCollection


Description	The unique instance identifier for an event.
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].EventTimestamp Member of LogEntryCollection.LogEntryCollection


Description	The date and time when the event occurred.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Members[{item}].Links Members[{item}].Links.OriginOfCondition The link to the resource that caused the log entry. OriginOfCondition is a link ("@odata.id": URI) to another resource.

Members[{item}].Message Member of LogEntryCollection.LogEntryCollection


Description	The log entry details.
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].MessageArgs (array) Member of LogEntryCollection.LogEntryCollection

MessageArgs is an array containing elements of:

MessageArgs[{item}] Member of LogEntryCollection.LogEntryCollection


Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].MessageId Member of LogEntryCollection.LogEntryCollection


Description	The MessageId, event data, or OEM-specific information. This property decodes from the entry type. If the entry type is `Event`, this property contains a Redfish Specification-defined MessageId. If the entry type is `SEL`, this property contains the Event Data. Otherwise, this property contains OEM-specific information.
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.Categories (array) Member of LogEntryCollection.LogEntryCollection

Categories is an array containing elements of:

Categories[{item}] Member of LogEntryCollection.LogEntryCollection


Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Security`
`Hardware`
`Firmware`
`Maintenance`
`Administration`
`Power`
`Cooling`
`Invalid User Input`
`Other`
`Configuration`

Members[{item}].Oem.Hpe.Class Member of LogEntryCollection.LogEntryCollection


Description	The log entry event class.
Type	integer
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.ClassDescription Member of LogEntryCollection.LogEntryCollection


Description	The log entry event class description.
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.Code Member of LogEntryCollection.LogEntryCollection


Description	The log entry event code.
Type	integer
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.Count Member of LogEntryCollection.LogEntryCollection


Description	The occurrence count of the log entry.
Type	integer
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.Destination Member of LogEntryCollection.LogEntryCollection


Description	The destination host name or IP address of the remote server that recevied the service event.
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.EventNumber Member of LogEntryCollection.LogEntryCollection


Description	The event log identification number. Events are numbered in the order in which they are generated.
Type	integer
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.Identifier Member of LogEntryCollection.LogEntryCollection


Description	The unique identifier of the service event.
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.LearnMoreLink Member of LogEntryCollection.LogEntryCollection


Description	The link to troubleshooting information.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members[{item}].Oem.Hpe.RecommendedAction Member of LogEntryCollection.LogEntryCollection


Description	The recommended action for the event.
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.Repaired Member of LogEntryCollection.LogEntryCollection


Description	The repaired status of the IML event.
Type	boolean
Read Only	False
Added	iLO6 1.05

Members[{item}].Oem.Hpe.ServiceEvent Member of LogEntryCollection.LogEntryCollection


Description	This indicates a service ticket to be raised for the corresponding event log.
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.ServiceEventMessageID Member of LogEntryCollection.LogEntryCollection


Description	This property represents the Embedded Remote Support Message ID. It is applicable only for a Service Event log.
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.Severity Member of LogEntryCollection.LogEntryCollection


Description	The log entry event Severity.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Informational`	Informational event
`Caution`	Caution event
`Critical`	Critical event
`Repaired`	Critical or Caution event repaired

Members[{item}].Oem.Hpe.SubmitStatus Member of LogEntryCollection.LogEntryCollection


Description	The service event log submission status .
Type	string
Read Only	True
Added	iLO6 1.05

Members[{item}].Oem.Hpe.Updated Member of LogEntryCollection.LogEntryCollection


Description	The date and time of the latest log entry update, for example, 2014-04-15T00:38:00Z.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Members[{item}].Oem.Hpe.UserAction Member of LogEntryCollection.LogEntryCollection


Description	The User action for the event.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Repaired`	The event repaired by user.
`Ignored`	The event ignored by user.
`None`	No user action taken on the event.
`Not Applicable`	User action not applicable for the event.

Members[{item}].OemRecordFormat Member of LogEntryCollection.LogEntryCollection


Description	The format of an OEM record.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Hpe-IML`
`Hpe-iLOEventLog`
`Hpe-SL`
`Hpe-Event`

Members[{item}].Severity Member of LogEntryCollection.LogEntryCollection


Description	The log entry severity.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`OK`
`Warning`
`Critical`

Members@odata.count

Member of LogEntryCollection.LogEntryCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

LogService

@odata.type: "#LogService.v1_1_0.LogService"

This resource contains properties for monitoring and configuring an event log service for the resource or service to which it is associated.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/logservices/iel`	GET POST
`/redfish/v1/systems/{item}/logservices/dpu`	GET POST
`/redfish/v1/systems/{item}/logservices/event`	GET POST
`/redfish/v1/systems/{item}/logservices/iml`	GET POST
`/redfish/v1/systems/{item}/logservices/sl`	GET POST

Links to other Resources

Link Name	Destination type
`Entries`	Collection of LogEntry

DateTime


Description	The current date and time, with UTC offset, that the Log Service uses to set or read time.
Type	string or null
Read Only	True
Added	iLO6 1.10
Format	date-time

DateTimeLocalOffset


Description	The UTC offset that the current DateTime proeprtu value contains in the `+HH:MM` format.
Type	string or null
Read Only	True
Added	iLO6 1.10

Entries

The URI to this log entries collection resource. Entries is a link ("@odata.id": URI) to another resource.

MaxNumberOfRecords


Description	The maximum number of log entries.
Type	integer
Read Only	True
Added	iLO6 1.05

OverWritePolicy


Description	When the log is full, the overwrite policy is enforced.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Unknown`	The overwrite policy is not known or is undefined.
`WrapsWhenFull`	When the log is full, new entries will overwrite previous entries.
`NeverOverwrites`	When the log is full, new entries are discarded.

ServiceEnabled


Description	An indication of whether this service is enabled.
Type	boolean
Read Only	True
Added	iLO6 1.10

Status

Member of LogService.v1_1_0.LogService See the Redfish standard schema and specification for information on common Status object.

Actions

LogService.ClearLog Member of LogService.v1_1_0.LogService There are no parameters for this action.

LogServiceCollection

@odata.type: "#LogServiceCollection.LogServiceCollection"

A Collection of LogService resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/logservices`	GET
`/redfish/v1/systems/{item}/logservices`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	LogService

Members (array)

Member of LogServiceCollection.LogServiceCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of LogServiceCollection.LogServiceCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of LogServiceCollection.LogServiceCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

Memory

@odata.type: "#Memory.v1_14_0.Memory"

The Memory resource describes a memory module.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/memory/{item}`	GET

AllocationAlignmentMiB

Member of Memory.v1_14_0.Memory


Description	The boundary which memory regions are allocated on, measured in MiB.
Type	number or null
Read Only	True
Added	iLO6 1.05

AllocationIncrementMiB

Member of Memory.v1_14_0.Memory


Description	The size of the smallest unit of allocation for a memory region, thus it is the multiple in which regions are actually reserved.
Type	number or null
Read Only	True
Added	iLO6 1.05

BaseModuleType

Member of Memory.v1_14_0.Memory


Description	The base module type of the memory.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`RDIMM`	Registered DIMM
`UDIMM`	UDIMM
`SO_DIMM`	SO_DIMM
`LRDIMM`	Load Reduced
`Mini_RDIMM`	Mini_RDIMM
`Mini_UDIMM`	Mini_UDIMM
`SO_RDIMM_72b`	SORDIMM72b
`SO_UDIMM_72b`	SOUDIMM72b
`SO_DIMM_16b`	SODIMM16b
`SO_DIMM_32b`	SODIMM32b
`Die`	A die within a package.

BusWidthBits

Member of Memory.v1_14_0.Memory


Description	Bus Width in bits.
Type	number or null
Read Only	True
Added	iLO6 1.05

CacheSizeMiB

Member of Memory.v1_14_0.Memory


Description	Total size of the cache portion memory in MiB.
Type	number or null
Read Only	True
Added	iLO6 1.05

CapacityMiB

Member of Memory.v1_14_0.Memory


Description	Memory Capacity in MiB.
Type	number or null
Read Only	True
Added	iLO6 1.05

ConfigurationLocked

Member of Memory.v1_14_0.Memory


Description	Indicates that the configuration of this memory has been locked
Type	boolean or null
Read Only	True
Added	iLO6 1.05

DataWidthBits

Member of Memory.v1_14_0.Memory


Description	Data Width in bits.
Type	number or null
Read Only	True
Added	iLO6 1.05

DeviceID

Member of Memory.v1_14_0.Memory


Description	Device ID
Type	string or null
Read Only	True
Added	iLO6 1.05

DeviceLocator

Member of Memory.v1_14_0.Memory


Description	Location of the Memory in the platform
Type	string or null
Read Only	True
Added	iLO6 1.05

ErrorCorrection

Member of Memory.v1_14_0.Memory


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`NoECC`	No ECC available
`SingleBitECC`	Single bit Data error can be corrected by ECC
`MultiBitECC`	Multi-bit Data errors can be corrected by ECC
`AddressParity`	Address Parity errors can be corrected

FirmwareApiVersion

Member of Memory.v1_14_0.Memory


Description	Version of API supported by the firmware
Type	string or null
Read Only	True
Added	iLO6 1.05

FirmwareRevision

Member of Memory.v1_14_0.Memory


Description	The firmware revision of this device
Type	string or null
Read Only	True
Added	iLO6 1.05

LogicalSizeMiB

Member of Memory.v1_14_0.Memory


Description	Total size of the logical memory in MiB.
Type	number or null
Read Only	True
Added	iLO6 1.05

Manufacturer

Member of Memory.v1_14_0.Memory


Description	The Memory manufacturer
Type	string or null
Read Only	True
Added	iLO6 1.05

MemoryDeviceType

Member of Memory.v1_14_0.Memory


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`DDR`	DDR
`DDR2`	DDR2
`DDR3`	DDR3
`DDR4`	DDR4
`DDR4_SDRAM`	DDR4 SDRAM
`DDR4E_SDRAM`	DDR4E SDRAM
`LPDDR4_SDRAM`	LPDDR4 SDRAM
`DDR3_SDRAM`	DDR3 SDRAM
`LPDDR3_SDRAM`	LPDDR3 SDRAM
`DDR2_SDRAM`	DDR2 SDRAM
`DDR2_SDRAM_FB_DIMM`	DDR2 SDRAM FB_DIMM
`DDR2_SDRAM_FB_DIMM_PROBE`	DDR2 SDRAM FB_DIMM PROBE
`DDR_SGRAM`	DDR SGRAM
`DDR_SDRAM`	DDR SDRAM
`ROM`	ROM
`SDRAM`	SDRAM
`EDO`	EDO
`FastPageMode`	Fast Page Mode
`PipelinedNibble`	Pipelined Nibble
`Logical`	Logical Non-volatile device.
`DDR5`	DDR5

MemoryLocation

MemoryLocation.Channel Member of Memory.v1_14_0.Memory


Description	Channel number in which Memory is connected
Type	number or null
Read Only	True
Added	iLO6 1.05

MemoryLocation.MemoryController Member of Memory.v1_14_0.Memory


Description	Memory controller number in which Memory is connected
Type	number or null
Read Only	True
Added	iLO6 1.05

MemoryLocation.Slot Member of Memory.v1_14_0.Memory


Description	Slot number in which Memory is connected
Type	number or null
Read Only	True
Added	iLO6 1.05

MemoryLocation.Socket Member of Memory.v1_14_0.Memory


Description	Socket number in which Memory is connected
Type	number or null
Read Only	True
Added	iLO6 1.05

MemoryMedia (array)

Member of Memory.v1_14_0.Memory

MemoryMedia is an array containing elements of:

MemoryMedia[{item}] Member of Memory.v1_14_0.Memory


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`DRAM`	DRAM media
`NAND`	NAND media
`Intel3DXPoint`	Intel 3D XPoint media
`Proprietary`	Proprietary media

MemorySubsystemControllerManufacturerID

Member of Memory.v1_14_0.Memory


Description	The manufacturer ID of the memory subsystem controller of this memory module.
Type	string or null
Read Only	True
Added	iLO6 1.05

MemorySubsystemControllerProductID

Member of Memory.v1_14_0.Memory


Description	The product ID of the memory subsystem controller of this memory module.
Type	string or null
Read Only	True
Added	iLO6 1.05

MemoryType

Member of Memory.v1_14_0.Memory


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`DRAM`	DRAM
`NVDIMM_N`	NVDIMM_N as defined by JEDEC.
`NVDIMM_F`	NVDIMM_F as defined by JEDEC.
`NVDIMM_P`	NVDIMM_P as defined by JEDEC.
`IntelOptane`	The memory module is Intel Optane DC Persistent Memory and composed of a combination of non-volatile and volatile memory.

ModuleManufacturerID

Member of Memory.v1_14_0.Memory


Description	The manufacturer ID of this memory module.
Type	string or null
Read Only	True
Added	iLO6 1.05

ModuleProductID

Member of Memory.v1_14_0.Memory


Description	The product ID of this memory module.
Type	string or null
Read Only	True
Added	iLO6 1.05

NonVolatileSizeMiB

Member of Memory.v1_14_0.Memory


Description	Total size of the non-volatile portion memory in MiB.
Type	number or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Armed

Member of Memory.v1_14_0.Memory


Description	Specifies the current backup-ready status of the NVDIMM_N if available.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Attributes (array)

Member of Memory.v1_14_0.Memory

Attributes is an array containing elements of:

Attributes[{item}] Member of Memory.v1_14_0.Memory


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`HpeSmartMemory`	This DIMM is HPE Smart Memory
`HpeStandardMemory`	This DIMM is HPE Standard Memory
`HpeLogicalNVDIMM`	This DIMM is HPE Logical Memory.

Oem.Hpe.BaseModuleType

Member of Memory.v1_14_0.Memory


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`BurstEDO`
`FastPage`
`Synchronous`
`EDO`
`LRDIMM`
`RDRAM`
`RDIMM`
`UDIMM`
`NVDIMM`
`NVDIMM-N`
`LRNVDIMM`
`SO_RDIMM_72b`
`SO_UDIMM_72b`
`PMM`

Oem.Hpe.BlocksRead

Member of Memory.v1_14_0.Memory


Description	Number of blocks read for the lifetime of the Memory.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.BlocksWritten

Member of Memory.v1_14_0.Memory


Description	Number of blocks written for the lifetime of the Memory.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.DIMMManufacturingDate

Member of Memory.v1_14_0.Memory


Description	Module manufacturing date in YYWW format.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.DIMMStatus

Member of Memory.v1_14_0.Memory


Description	Specifies memory module status and whether the module in use.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Unknown`	The status of the DIMM is unknown.
`Other`	DIMM status that does not fit any of these definitions.
`NotPresent`	DIMM is not present.
`PresentUnused`	DIMM is present but unused.
`GoodInUse`	DIMM is functioning properly and currently in use.
`AddedButUnused`	DIMM is added but currently unused.
`UpgradedButUnused`	DIMM is upgraded but currently unused.
`ExpectedButMissing`	DIMM is expected but missing.
`DoesNotMatch`	DIMM type does not match.
`NotSupported`	DIMM is not supported.
`ConfigurationError`	Configuration error in DIMM.
`Degraded`	DIMM state is degraded.
`PresentSpare`	DIMM is present but used as spare.
`GoodPartiallyInUse`	DIMM is functioning properly but partially in use.
`MapOutConfiguration`	DIMM mapped out due to configuration error.
`MapOutError`	DIMM mapped out due to training failure.

Oem.Hpe.MaxOperatingSpeedMTs

Member of Memory.v1_14_0.Memory


Description	Maximum capable speed of the device, in megatransfers per second (MT/s).
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.MinimumVoltageVoltsX10

Member of Memory.v1_14_0.Memory


Description	The minimum DIMM voltage multiplied by 10, for example, 1.2v = 12.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.PartNumber

Member of Memory.v1_14_0.Memory


Description	The HPE product part number of this device
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.PredictedMediaLifeLeftPercent

Member of Memory.v1_14_0.Memory


Description	The percentage of media life left.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.ProductName

Member of Memory.v1_14_0.Memory


Description	friendly product name from SMBIOS 202 record
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.RelatedBackupStores (array)

Member of Memory.v1_14_0.Memory

RelatedBackupStores is an array containing elements of:

RelatedBackupStores[{item}].@odata.id Member of Memory.v1_14_0.Memory


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Oem.Hpe.RelatedPhysicalDIMMs (array)

Member of Memory.v1_14_0.Memory

RelatedPhysicalDIMMs is an array containing elements of:

RelatedPhysicalDIMMs[{item}].@odata.id Member of Memory.v1_14_0.Memory


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Oem.Hpe.RelatedPowerBackupUnitBays (array)

Member of Memory.v1_14_0.Memory

RelatedPowerBackupUnitBays is an array containing elements of:

RelatedPowerBackupUnitBays[{item}] Member of Memory.v1_14_0.Memory


Description	Battery backup unit bay number.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.SPDBytes (array)

Member of Memory.v1_14_0.Memory

SPDBytes is an array containing elements of:

SPDBytes[{item}] Member of Memory.v1_14_0.Memory


Description	The SPD Bytes in the DIMM
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.SpareBlockLeftPercent

Member of Memory.v1_14_0.Memory


Description	The percentage of the number of spare blocks remaining.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.VendorName

Member of Memory.v1_14_0.Memory


Description	Vendor Name decoded from VendorID
Type	string or null
Read Only	True
Added	iLO6 1.05

OperatingMemoryModes (array)

Member of Memory.v1_14_0.Memory

OperatingMemoryModes is an array containing elements of:

OperatingMemoryModes[{item}] Member of Memory.v1_14_0.Memory


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Volatile`	Volatile memory
`PMEM`	Persistent memory, byte accesible through system address space
`Block`	Block accessible system memory

OperatingSpeedMhz

Member of Memory.v1_14_0.Memory


Description	Operating speed of Memory in MHz
Type	number or null
Read Only	True
Added	iLO6 1.05

PartNumber

Member of Memory.v1_14_0.Memory


Description	The product part number of this device
Type	string or null
Read Only	True
Added	iLO6 1.05

PersistentRegionNumberLimit

Member of Memory.v1_14_0.Memory


Description	Total number of persistent regions this Memory can support.
Type	number or null
Read Only	True
Added	iLO6 1.05

PersistentRegionSizeLimitMiB

Member of Memory.v1_14_0.Memory


Description	Total size of persistent regions in MiB
Type	number or null
Read Only	True
Added	iLO6 1.05

PersistentRegionSizeMaxMiB

Member of Memory.v1_14_0.Memory


Description	Maximum size of a single persistent region in MiB.
Type	number or null
Read Only	True
Added	iLO6 1.05

RankCount

Member of Memory.v1_14_0.Memory


Description	Number of ranks available in the Memory
Type	number or null
Read Only	True
Added	iLO6 1.05

Regions (array)

Member of Memory.v1_14_0.Memory

Regions is an array containing elements of:

Regions[{item}].MemoryClassification Member of Memory.v1_14_0.Memory


Description	Classification of memory occupied by the given memory region
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Volatile`	Volatile memory
`ByteAccessiblePersistent`	Byte accessible persistent memory
`Block`	Block accesible memory

Regions[{item}].PassphraseEnabled Member of Memory.v1_14_0.Memory


Description	State of the passphrase for this region
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Regions[{item}].RegionId Member of Memory.v1_14_0.Memory


Description	Unique region ID representing a specific region within the Memory
Type	string or null
Read Only	True
Added	iLO6 1.05

Regions[{item}].SizeMiB Member of Memory.v1_14_0.Memory


Description	Size of this memory region in MiB
Type	number or null
Read Only	True
Added	iLO6 1.05

SecurityCapabilities

SecurityCapabilities.ConfigurationLockCapable Member of Memory.v1_14_0.Memory


Description	Support for configuration locking
Type	boolean or null
Read Only	True
Added	iLO6 1.05

SecurityCapabilities.DataLockCapable Member of Memory.v1_14_0.Memory


Description	Support for data locking
Type	boolean or null
Read Only	True
Added	iLO6 1.05

SecurityCapabilities.PassphraseCapable Member of Memory.v1_14_0.Memory


Description	Memory passphrase set capability
Type	boolean or null
Read Only	True
Added	iLO6 1.05

SecurityCapabilities.PassphraseLockLimit Member of Memory.v1_14_0.Memory


Description	Maximum number of incorrect passphrase attempts allowed before memory is locked.
Type	number or null
Read Only	True
Added	iLO6 1.05

SecurityState

Member of Memory.v1_14_0.Memory


Description	The current security state of this Memory
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	Secure mode is enabled and access to the data is unlocked
`Disabled`	Secure mode is disabled
`Locked`	Secure mode is enabled and access to the data is locked
`Passphraselimit`	Number of attempts to unlock the Memory exceeded limit

SerialNumber

Member of Memory.v1_14_0.Memory


Description	The serial number of this device
Type	string or null
Read Only	True
Added	iLO6 1.05

Status

Member of Memory.v1_14_0.Memory See the Redfish standard schema and specification for information on common Status object.

SubsystemDeviceID

Member of Memory.v1_14_0.Memory


Description	Subsystem Device ID
Type	string or null
Read Only	True
Added	iLO6 1.05

SubsystemVendorID

Member of Memory.v1_14_0.Memory


Description	SubSystem Vendor ID
Type	string or null
Read Only	True
Added	iLO6 1.05

VendorID

Member of Memory.v1_14_0.Memory


Description	Vendor ID
Type	string or null
Read Only	True
Added	iLO6 1.05

VolatileRegionNumberLimit

Member of Memory.v1_14_0.Memory


Description	Total number of volatile regions this Memory can support.
Type	number or null
Read Only	True
Added	iLO6 1.05

VolatileRegionSizeLimitMiB

Member of Memory.v1_14_0.Memory


Description	Total size of volatile regions in MiB
Type	number or null
Read Only	True
Added	iLO6 1.05

VolatileRegionSizeMaxMiB

Member of Memory.v1_14_0.Memory


Description	Maximum size of a single volatile region in MiB.
Type	number or null
Read Only	True
Added	iLO6 1.05

VolatileSizeMiB

Member of Memory.v1_14_0.Memory


Description	Total size of the volitile portion memory in MiB.
Type	number or null
Read Only	True
Added	iLO6 1.05

MemoryChunks

@odata.type: "#MemoryChunks.v1_2_3.MemoryChunks"

The MemoryChunks resource describes a Memory Chunk and its configuration.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/memorydomains/{item}/memorychunks/{item}`	GET DELETE

AddressRangeType


Description	Memory type of this memory chunk
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`PMEM`	Byte accessible persistent memory

InterleaveSets (array)

InterleaveSets is an array containing elements of:

InterleaveSets[{item}].Memory Describes a memory device of the interleave set. Memory is a link ("@odata.id": URI) to another resource.

InterleaveSets[{item}].MemoryLevel Member of MemoryChunks.v1_2_3.MemoryChunks


Description	Level of the interleave set for multi-level tiered memory.
Type	number or null
Read Only	True
Added	iLO6 1.05

InterleaveSets[{item}].OffsetMiB Member of MemoryChunks.v1_2_3.MemoryChunks


Description	Offset within the DIMM that corresponds to the start of this memory region, with units in MiB
Type	number or null
Read Only	True
Added	iLO6 1.05

InterleaveSets[{item}].RegionId Member of MemoryChunks.v1_2_3.MemoryChunks


Description	DIMM region identifier
Type	string or null
Read Only	True
Added	iLO6 1.05

InterleaveSets[{item}].SizeMiB Member of MemoryChunks.v1_2_3.MemoryChunks


Description	Size of this memory region in MiB
Type	number or null
Read Only	True
Added	iLO6 1.05

IsMirrorEnabled


Description	Mirror Enabled status
Type	boolean or null
Read Only	True
Added	iLO6 1.05

IsSpare


Description	Spare enabled status
Type	boolean or null
Read Only	True
Added	iLO6 1.05

MemoryChunkSizeMiB


Description	Size of the memory chunk in MiB
Type	number or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.MemoryChunkSizePercentage


Description	Size of chunk in percent of total capacity.
Type	integer or null
Read Only	False
Added	iLO6 1.05

Status

Member of MemoryChunks.v1_2_3.MemoryChunks See the Redfish standard schema and specification for information on common Status object.

MemoryChunksCollection

@odata.type: "#MemoryChunksCollection.MemoryChunksCollection"

A Collection of MemoryChunks resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/memorydomains/{item}/memorychunks`	GET POST

Links to other Resources

Link Name	Destination type
`Members[]`	MemoryChunks

Members (array)

Member of MemoryChunksCollection.MemoryChunksCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of MemoryChunksCollection.MemoryChunksCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of MemoryChunksCollection.MemoryChunksCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

MemoryCollection

@odata.type: "#MemoryCollection.MemoryCollection"

A Collection of Memory resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/memory`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	Memory

Members (array)

Member of MemoryCollection.MemoryCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of MemoryCollection.MemoryCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of MemoryCollection.MemoryCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.AmpModeActive

Member of MemoryCollection.MemoryCollection


Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Unknown`	The management software cannot determine the AMP, host OS may not have provided it yet.
`Other`
`None`	The management software cannot determine the AMP, or the system is not configured for AMP.
`Mirroring`	The system is configured for mirrored memory protection. All memory banks are duplicated in mirrored memory, as opposed to only one for online spare memory. If enough ECC errors occur, the spare memory is activated and the memory that is experiencing the errors is disabled.
`OnlineSpare`	A single spare bank of memory is set aside at boot time. If enough ECC errors occur, the spare memory is activated and the memory that is experiencing the errors is disabled.
`RAIDXOR`	The system is configured for AMP with the XOR engine.
`AdvancedECC`	The system is configured for AMP with the Advanced ECC engine.
`Lockstep`
`A3DC`	The system is configured for AMP with A3DC.
`DIMMECC`	The system is configured for AMP with DIMM ECC (Error Correcting Code) only.

Oem.Hpe.AmpModeStatus

Member of MemoryCollection.MemoryCollection


Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Unknown`	The management software cannot determine the status, host OS may not have provided it yet.
`Other`	The system does not support AMP, or the management software cannot determine the status.
`NotProtected`	The system supports AMP, but the feature is disabled.
`Protected`	The system supports AMP. The feature is enabled but not engaged.
`Degraded`	The system was protected, but AMP is engaged. Therefore, AMP is no longer available.
`DIMMECC`	The system is protected by DIMM ECC (Error Correcting Code) only.
`Mirroring`	The system is protected by AMP in the mirrored mode. No DIMM faults have been detected.
`DegradedMirroring`	The system is protected by AMP in the mirrored mode. One or more DIMM faults have been detected.
`OnlineSpare`	The system is protected by AMP in the hot spare mode. No DIMM faults have been detected.
`DegradedOnlineSpare`
`RAIDXOR`	The system is protected by AMP in the XOR memory mode. No DIMM faults have been detected.
`DegradedRAIDXOR`	The system is protected by AMP in the XOR memory mode. One or more DIMM faults have been detected.
`AdvancedECC`	The system is protected by AMP in the Advanced ECC mode.
`DegradedAdvancedECC`	The system is protected by AMP in the Advanced ECC mode. One or more DIMM faults have been detected.
`Lockstep`
`DegradedLockstep`
`A3DC`	The system is protected by AMP in the A3DC mode.
`DegradedA3DC`	The system is protected by AMP in the A3DC mode. One or more DIMM faults have been deteced.
`Unsupported`

Oem.Hpe.AmpModeSupported (array)

Member of MemoryCollection.MemoryCollection

AmpModeSupported is an array containing elements of:

AmpModeSupported[{item}] Member of MemoryCollection.MemoryCollection


Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`RAIDXOR`	The system can be configured for AMP using the XOR engine.
`DualBoardMirroring`	The system can be configured for mirrored advanced memory protection in a dual memory board configuration. The mirrored memory can be swapped with memory on the same memory board or with memory on the second memory board.
`SingleBoardMirroring`	The system can be configured for mirrored advanced memory protection in a single memory board.
`AdvancedECC`	The system can be configured for Advanced ECC.
`Mirroring`	The system can be configured for mirrored AMP.
`OnlineSpare`	The system can be configured for online spare AMP.
`OnlineSpareRank`	The system can be configured for Online Spare Rank AMP.
`OnlineSpareChannel`	The system can be configured for Online Spare Channel AMP.
`IntersocketMirroring`	The system can be configured for mirrored intersocket AMP between the memory of two processors or boards.
`IntrasocketMirroring`	The system can be configured for mirrored intrasocket AMP between the memory of a single processor or board.
`Lockstep`
`A3DC`	The system can be configured for A3DC.
`None`	The system cannot be configured for AMP.
`DIMMECC`	The system can be configured for DIMM ECC (Error Correcting Code) only.

Oem.Hpe.MemoryList (array)

Member of MemoryCollection.MemoryCollection

MemoryList is an array containing elements of:

MemoryList[{item}].BoardCpuNumber Member of MemoryCollection.MemoryCollection


Type	integer or null
Read Only	True
Added	iLO6 1.05

MemoryList[{item}].BoardMemoryType Member of MemoryCollection.MemoryCollection


Description	Board Memory Type - DIMM/HBM.
Type	string or null
Read Only	True
Added	iLO6 1.40

MemoryList[{item}].BoardNumberOfSockets Member of MemoryCollection.MemoryCollection


Description	The number of present memory module sockets.
Type	integer or null
Read Only	True
Added	iLO6 1.05

MemoryList[{item}].BoardOperationalFrequency Member of MemoryCollection.MemoryCollection


Description	The frequency at which memory on the board is operating in MHz.
Type	integer or null
Read Only	True
Added	iLO6 1.05

MemoryList[{item}].BoardOperationalVoltage Member of MemoryCollection.MemoryCollection


Description	The voltage at which memory on the board is operating in mV.
Type	integer or null
Read Only	True
Added	iLO6 1.05

MemoryList[{item}].BoardTotalMemorySize Member of MemoryCollection.MemoryCollection


Description	The total size of the memory populated on the board in MB.
Type	integer or null
Read Only	True
Added	iLO6 1.05

MemoryDomain

@odata.type: "#MemoryDomain.v1_2_1.MemoryDomain"

The MemoryDomain resource describes a Memory Domain and its configuration. Memory Domains are used to indicate to the client which Memory (DIMMs) can be grouped together in Memory Chunks to form interleave sets or otherwise grouped together.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/memorydomains/{item}`	GET

AllowsBlockProvisioning


Description	Indicates if this Memory Domain supports the provisioning of blocks of memory.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

AllowsMemoryChunkCreation


Description	Indicates if this Memory Domain supports the creation of Memory Chunks.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

AllowsMirroring


Description	Indicates if this Memory Domain supports the creation of Memory Chunks with mirroring enabled.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

AllowsSparing


Description	Indicates if this Memory Domain supports the creation of Memory Chunks with sparing enabled.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

InterleavableMemorySets (array)

InterleavableMemorySets is an array containing elements of:

InterleavableMemorySets[{item}].MemorySet (array) Member of MemoryDomain.v1_2_1.MemoryDomain

MemorySet is an array containing elements of:

MemorySet[{item}].@odata.id Member of MemoryDomain.v1_2_1.MemoryDomain


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

InterleavableMemorySets[{item}].MemorySet@odata.count Member of MemoryDomain.v1_2_1.MemoryDomain


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

MemoryChunks

A reference to the collection of Memory Chunks associated with this Memory Domain. MemoryChunks is a link ("@odata.id": URI) to another resource.

MemoryDomainCollection

@odata.type: "#MemoryDomainCollection.MemoryDomainCollection"

A Collection of MemoryDomain resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/memorydomains`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	MemoryDomain

Members (array)

Member of MemoryDomainCollection.MemoryDomainCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of MemoryDomainCollection.MemoryDomainCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of MemoryDomainCollection.MemoryDomainCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

MessageRegistryFile

@odata.type: "#MessageRegistryFile.v1_0_4.MessageRegistryFile"

The MessageRegistryFile resource describes the Schema File locator resource.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/registries/{item}`	GET

Languages (array)

Member of MessageRegistryFile.v1_0_4.MessageRegistryFile

Languages is an array containing elements of:

Languages[{item}] Member of MessageRegistryFile.v1_0_4.MessageRegistryFile


Type	string
Read Only	True
Added	iLO6 1.05

Location (array)

Member of MessageRegistryFile.v1_0_4.MessageRegistryFile

Location is an array containing elements of:

Location[{item}].Language Member of MessageRegistryFile.v1_0_4.MessageRegistryFile


Description	The RFC 5646 language code for this schema or registry item.
Type	string
Read Only	True
Added	iLO6 1.05

Location[{item}].Uri Member of MessageRegistryFile.v1_0_4.MessageRegistryFile


Description	Link to locally available URI for schema.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Registry

Member of MessageRegistryFile.v1_0_4.MessageRegistryFile


Description	The Registry Name, Major and Minor version used in MessageID construction.
Type	string
Read Only	True
Added	iLO6 1.05

MessageRegistryFileCollection

@odata.type: "#MessageRegistryFileCollection.MessageRegistryFileCollection"

A Collection of MessageRegistryFile resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/registries`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	MessageRegistryFile

Members (array)

Member of MessageRegistryFileCollection.MessageRegistryFileCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of MessageRegistryFileCollection.MessageRegistryFileCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of MessageRegistryFileCollection.MessageRegistryFileCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

MetricDefinition

@odata.type: "#MetricDefinition.v1_0_0.MetricDefinition"

The metadata information about a metric.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/telemetryservice/metricdefinitions/{item}`	GET

Calculable


Description	The types of calculations which can be applied to the metric reading. This property provides information to the client on the suitability of calculatiion using the metric reading.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`NonCalculatable`	No calculations should be performed on the metric reading.
`Summable`	The sum of the metric reading across multiple instances is meaningful.
`NonSummable`	The sum of the metric reading across multiple instances is not meaningful.

CalculationAlgorithm


Description	The calculation which is performed on a source metric to obtain the metric being defined.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Average`	The metric is calculated as the average of a metric reading over a sliding time interval.
`Maximum`	The metric is calculated as the maximum value of a metric reading over during a time interval.
`Minimum`	The metric is calculated as the minimum value of a metric reading over a sliding time interval.

Implementation


Description	The implementation of the metric.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`PhysicalSensor`	The metric is implemented as a physical sensor.
`Calculated`	The metric is implemented by applying a calculation on another metric property. The calculation is specified in the CalculationAlgorithm property.
`Synthesized`	The metric is implemented by applying a calculation on one or more metric properties. (The calculation is not specified. For expressing generalized formula, see MathSON).
`DigitalMeter`	The metric is implemented as digital meter.

IsLinear


Description	Indicates whether the metric values are linear (vs non-linear).
Type	boolean or null
Read Only	False
Added	iLO6 1.05

MaxReadingRange


Description	Maximum value for metric reading.
Type	number or null
Read Only	True
Added	iLO6 1.05

MetricDataType


Description	The data type of the related metric values. The property provides information to the client on the nature of the metric reading.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Boolean`	The data type follows the JSON Boolean definition.
`DateTime`	The data type follows the JSON String definition with the Date-Time format applied.
`Decimal`	The data type follows the JSON Decimal definition.
`Integer`	The data type follows the JSON Integer definition.
`String`	The data type follows the JSON String definition.
`Enumeration`	The data type follows the JSON String definition with a set of enumerations defined.

MetricProperties (array)

MetricProperties is an array containing elements of:

MetricProperties[{item}] Member of MetricDefinition.v1_0_0.MetricDefinition


Type	string or null
Read Only	True
Added	iLO6 1.05

MetricType


Description	Specifies the type of metric provided. The property provides information to the client on how the metric can be handled.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Numeric`	The metric is a numeric metric. The metric value is any real number.
`Discrete`	The metric is a discrete metric. The metric value is discrete. The possible values are listed in the DiscreteValues property.
`Gauge`	The metric is a gauge metric. The metric value is a real number. When the metric value reaches the gauges extrema, it stays at that value, until the reading falls within the extrema.
`Counter`	The metric is a counter metric. The metric reading is a non-negative integer which increases monotonically. When a counter reaches its maximum, the value resets to 0 and resumes counting.
`Countdown`	The metric is a countdown metric. The metric reading is a non-negative integer which decreases monotonically. When a counter reaches its minimum, the value resets to preset value and resumes counting down.

MinReadingRange


Description	Minimum value for metric reading.
Type	number or null
Read Only	True
Added	iLO6 1.05

Units


Description	The units of measure for this metric.
Type	string or null
Read Only	False
Added	iLO6 1.05

MetricDefinitionCollection

@odata.type: "#MetricDefinitionCollection.MetricDefinitionCollection"

A Collection of MetricDefinition resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/telemetryservice/metricdefinitions`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	MetricDefinition

Members (array)

Member of MetricDefinitionCollection.MetricDefinitionCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of MetricDefinitionCollection.MetricDefinitionCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of MetricDefinitionCollection.MetricDefinitionCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

MetricReport

@odata.type: "#MetricReport.v1_0_0.MetricReport"

The metric definitions used to create a metric report.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/telemetryservice/metricreports/{item}`	GET

MetricReportDefinition

The metric definitions used to create a metric report. MetricReportDefinition is a link ("@odata.id": URI) to another resource.

MetricValues (array)

Member of MetricReport.v1_0_0.MetricReport

MetricValues is an array containing elements of:

MetricValues[{item}].MetricDefinition A link to the Metric Definition. MetricDefinition is a link ("@odata.id": URI) to another resource.

MetricValues[{item}].MetricId Member of MetricReport.v1_0_0.MetricReport


Description	The metric definitions identifier for this metric.
Type	string or null
Read Only	True
Added	iLO6 1.05

MetricValues[{item}].MetricValue Member of MetricReport.v1_0_0.MetricReport


Description	The value identifies this resource.
Type	string or null
Read Only	True
Added	iLO6 1.05

MetricValues[{item}].Timestamp Member of MetricReport.v1_0_0.MetricReport


Description	The time when the value of the metric is obtained.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

MetricReportCollection

@odata.type: "#MetricReportCollection.MetricReportCollection"

A Collection of MetricReport resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/telemetryservice/metricreports`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	MetricReport

Members (array)

Member of MetricReportCollection.MetricReportCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of MetricReportCollection.MetricReportCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of MetricReportCollection.MetricReportCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

MetricReportDefinition

@odata.type: "#MetricReportDefinition.v1_0_0.MetricReportDefinition"

A set of metrics that are collected into a metric report.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/telemetryservice/metricreportdefinitions/{item}`	GET

MetricProperties (array)

Member of MetricReportDefinition.v1_0_0.MetricReportDefinition

MetricProperties is an array containing elements of:

MetricProperties[{item}] Member of MetricReportDefinition.v1_0_0.MetricReportDefinition


Type	string or null
Read Only	True
Added	iLO6 1.05

MetricReport

Specifies the location where the resultant metric report is placed. MetricReport is a link ("@odata.id": URI) to another resource.

MetricReportDefinitionType

Member of MetricReportDefinition.v1_0_0.MetricReportDefinition


Description	Indicates when the metric report is generated.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Periodic`	The metric report is generated at a periodic time interval, specified in the Schedule property.
`OnChange`	The metric report is generated when any of the metric values change.
`OnRequest`	The metric report is generated when a HTTP GET is performed on the specified metric report.

Metrics (array)

Member of MetricReportDefinition.v1_0_0.MetricReportDefinition

Metrics is an array containing elements of:

Metrics[{item}].CollectionDuration Member of MetricReportDefinition.v1_0_0.MetricReportDefinition


Description	Specifies the duration over which the function is computed.
Type	string or null
Read Only	False
Added	iLO6 1.05

Metrics[{item}].CollectionFunction Member of MetricReportDefinition.v1_0_0.MetricReportDefinition


Description	Specifies the function to apply to the list of metric properties.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Average`	The metric is calculated as the average of a metric reading over a sliding time interval.
`Maximum`	The metric is calculated as the maximum value of a metric reading over during a time interval.
`Minimum`	The metric is calculated as the minimum value of a metric reading over a sliding time interval.
`Summation`	The metric is calculated as the sum of the values over a sliding time interval.

Metrics[{item}].CollectionTimeScope Member of MetricReportDefinition.v1_0_0.MetricReportDefinition


Description	The time scope of the related metric values.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Point`	The corresponding metric values apply to a point in time. On the corresponding metric value instances, the value of Timestamp shall specify the point in time.
`Interval`	The corresponding metric values apply to a time interval. On the corresponding metric value instances, the value of Timestamp shall specify the end of the time interval and Duration shall specify its duration.
`StartupInterval`	The corresponding metric values apply to a time interval that began at the startup of the measured resource (i.e. the Resources associated by Links.MetricDefinitionForResources). On the corresponding metric value instances, the value of Timestamp shall specify the end of the time interval. The value of Duration shall specifies the duration between startup of the resource and TimeStamp.

Metrics[{item}].MetricId Member of MetricReportDefinition.v1_0_0.MetricReportDefinition


Description	Specifies the label for the metric definition which is derived by applying the CollectionFunction to the metric property.
Type	string or null
Read Only	True
Added	iLO6 1.05

Metrics[{item}].MetricProperties (array) Member of MetricReportDefinition.v1_0_0.MetricReportDefinition

MetricProperties is an array containing elements of:

MetricProperties[{item}] Member of MetricReportDefinition.v1_0_0.MetricReportDefinition


Type	string or null
Read Only	True
Added	iLO6 1.05

Status

Member of MetricReportDefinition.v1_0_0.MetricReportDefinition See the Redfish standard schema and specification for information on common Status object.

MetricReportDefinitionCollection

@odata.type: "#MetricReportDefinitionCollection.MetricReportDefinitionCollection"

A Collection of MetricReportDefinition resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/telemetryservice/metricreportdefinitions`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	MetricReportDefinition

Members (array)

Member of MetricReportDefinitionCollection.MetricReportDefinitionCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of MetricReportDefinitionCollection.MetricReportDefinitionCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of MetricReportDefinitionCollection.MetricReportDefinitionCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

PCIeDevice

@odata.type: "#PCIeDevice.v1_5_0.PCIeDevice"

This is the schema definition for the PCIeDevice resource. It represents the properties of a PCIe Device attached to a System.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/pciedevices/{item}`	GET PATCH

Links to other Resources

Link Name	Destination type
`PCIeFunctions`	PCIeFunction

AssetTag


Description	The user-assigned asset tag for this PCIe device.
Type	string or null
Read Only	False
Added	iLO6 1.20

DeviceType


Description	The device type for this PCIe device.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`SingleFunction`	A single-function PCIe device.
`MultiFunction`	A multi-function PCIe device.
`Simulated`	A PCIe device which is not currently physically present, but is being simulated by the PCIe infrastructure.

FirmwareVersion


Description	The version of firmware for this PCIe device.
Type	string or null
Read Only	True
Added	iLO6 1.05

Manufacturer


Description	The manufacturer of this PCIe device.
Type	string or null
Read Only	True
Added	iLO6 1.05

Model


Description	The model number for the PCIe device.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.FirmwareVersion (array)

FirmwareVersion is an array containing elements of:

FirmwareVersion[{item}].ComponentName Member of PCIeDevice.v1_5_0.PCIeDevice


Description	Name of GPU cores
Type	string or null
Read Only	True
Added	iLO6 1.10

FirmwareVersion[{item}].VersionString Member of PCIeDevice.v1_5_0.PCIeDevice


Description	Version string of GPU cores
Type	string or null
Read Only	True
Added	iLO6 1.10

PCIeFunctions

The link to the collection of PCIe functions associated with this PCIe device. PCIeFunctions is a link ("@odata.id": URI) to another resource.

PCIeInterface

PCIeInterface.LanesInUse Member of PCIeDevice.v1_5_0.PCIeDevice


Description	The number of PCIe lanes in use by this device.
Type	integer or null
Read Only	True
Added	iLO6 1.05

PCIeInterface.MaxLanes Member of PCIeDevice.v1_5_0.PCIeDevice


Description	The number of PCIe lanes supported by this device.
Type	integer or null
Read Only	True
Added	iLO6 1.05

PCIeInterface.MaxPCIeType Member of PCIeDevice.v1_5_0.PCIeDevice


Description	The highest version of the PCIe specification supported by this device.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Gen1`	A PCIe v1.0 slot.
`Gen2`	A PCIe v2.0 slot.
`Gen3`	A PCIe v3.0 slot.
`Gen4`	A PCIe v4.0 slot.
`Gen5`	A PCIe v5.0 slot.

PCIeInterface.PCIeType Member of PCIeDevice.v1_5_0.PCIeDevice


Description	The version of the PCIe specification in use by this device.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Gen1`	A PCIe v1.0 slot.
`Gen2`	A PCIe v2.0 slot.
`Gen3`	A PCIe v3.0 slot.
`Gen4`	A PCIe v4.0 slot.
`Gen5`	A PCIe v5.0 slot.

PartNumber


Description	The part number for this PCIe device.
Type	string or null
Read Only	True
Added	iLO6 1.05

SKU


Description	The SKU for this PCIe device.
Type	string or null
Read Only	True
Added	iLO6 1.05

SerialNumber


Description	The serial number for this PCIe device.
Type	string or null
Read Only	True
Added	iLO6 1.05

Status

Member of PCIeDevice.v1_5_0.PCIeDevice See the Redfish standard schema and specification for information on common Status object.

PCIeDeviceCollection

@odata.type: "#PCIeDeviceCollection.PCIeDeviceCollection"

The collection of PCIeDevice Resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/pciedevices`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	PCIeDevice

Members (array)

Member of PCIeDeviceCollection.PCIeDeviceCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of PCIeDeviceCollection.PCIeDeviceCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of PCIeDeviceCollection.PCIeDeviceCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

PCIeFunction

@odata.type: "#PCIeFunction.v1_2_3.PCIeFunction"

The schema definition for the PCIeFunction Resource. It represents the properties of a PCIeFunction attached to a System.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/pciedevices/{item}/pciefunctions/{item}`	GET

ClassCode


Description	The Class Code of this PCIe function.
Type	string or null
Read Only	True
Added	iLO6 1.05

DeviceClass


Description	The class for this PCIe function.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`UnclassifiedDevice`	An unclassified device.
`MassStorageController`	A mass storage controller.
`NetworkController`	A network controller.
`DisplayController`	A display controller.
`MultimediaController`	A multimedia controller.
`MemoryController`	A memory controller.
`Bridge`	A bridge.
`CommunicationController`	A communication controller.
`GenericSystemPeripheral`	A generic system peripheral.
`InputDeviceController`	An input device controller.
`DockingStation`	A docking station.
`Processor`	A processor.
`SerialBusController`	A serial bus controller.
`WirelessController`	A wireless controller.
`IntelligentController`	An intelligent controller.
`SatelliteCommunicationsController`	A satellite communications controller.
`EncryptionController`	An encryption controller.
`SignalProcessingController`	A signal processing controller.
`ProcessingAccelerators`	A processing accelerators.
`NonEssentialInstrumentation`	A non-essential instrumentation.
`Coprocessor`	A coprocessor.
`UnassignedClass`	An unassigned class.
`Other`	A other class. The function Device Class Id needs to be verified.

DeviceId


Description	The Device ID of this PCIe function.
Type	string or null
Read Only	True
Added	iLO6 1.05

FunctionId


Description	The PCIe Function Number.
Type	integer or null
Read Only	True
Added	iLO6 1.05

FunctionType


Description	The type of the PCIe function.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Physical`	A physical PCIe function.
`Virtual`	A virtual PCIe function.

RevisionId


Description	The Revision ID of this PCIe function.
Type	string or null
Read Only	True
Added	iLO6 1.05

Status

Member of PCIeFunction.v1_2_3.PCIeFunction See the Redfish standard schema and specification for information on common Status object.

SubsystemId


Description	The Subsystem ID of this PCIe function.
Type	string or null
Read Only	True
Added	iLO6 1.05

SubsystemVendorId


Description	The Subsystem Vendor ID of this PCIe function.
Type	string or null
Read Only	True
Added	iLO6 1.05

VendorId


Description	The Vendor ID of this PCIe function.
Type	string or null
Read Only	True
Added	iLO6 1.05

PCIeFunctionCollection

@odata.type: "#PCIeFunctionCollection.PCIeFunctionCollection"

The collection of PCIeFunction Resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/pciedevices/{item}/pciefunctions`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	PCIeFunction

Members (array)

Member of PCIeFunctionCollection.PCIeFunctionCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of PCIeFunctionCollection.PCIeFunctionCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of PCIeFunctionCollection.PCIeFunctionCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

PCIeSlots

@odata.type: "#PCIeSlots.v1_3_0.PCIeSlots"

The PCIeSlots schema describes PCIe slot properties.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/pcieslots`	GET

Slots (array)

Member of PCIeSlots.v1_3_0.PCIeSlots

Slots is an array containing elements of:

Slots[{item}].HotPluggable Member of PCIeSlots.v1_3_0.PCIeSlots


Description	An indication of whether this PCIe slot supports hotplug.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Slots[{item}].Lanes Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The number of PCIe lanes supported by this slot.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Slots[{item}].Location Slots[{item}].Location.PartLocation Slots[{item}].Location.PartLocation.LocationOrdinalValue Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The number that represents the location of the part. If LocationType is `slot` and this unit is in slot 2, the LocationOrdinalValue is 2.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Slots[{item}].Location.PartLocation.LocationType Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The location types for PartLocation.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Slot`	The slot as the type of location.
`Bay`	The bay as the type of location.
`Connector`	The connector as the type of location.
`Socket`	The socket as the type of location.
`Embedded`	Embedded within a part.

Slots[{item}].Location.PartLocation.Orientation Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The orientation for the ordering of the part location ordinal value.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`FrontToBack`	The ordering for LocationOrdinalValue is front to back.
`BackToFront`	The ordering for the LocationOrdinalValue is back to front.
`TopToBottom`	The ordering for the LocationOrdinalValue is top to bottom.
`BottomToTop`	The ordering for LocationOrdinalValue is bottom to top.
`LeftToRight`	The ordering for the LocationOrdinalValue is left to right.
`RightToLeft`	The ordering for the LocationOrdinalValue is right to left.

Slots[{item}].Location.PartLocation.Reference Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The reference area for the location of the part.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Top`	The part is in the top of the unit.
`Bottom`	The part is in the bottom of the unit.
`Front`	The part is in the front of the unit.
`Rear`	The part is in the rear of the unit.
`Left`	The part is on the left side of of the unit.
`Right`	The part is on the right side of the unit.
`Middle`	The part is in the middle of the unit.

Slots[{item}].Location.PartLocation.ServiceLabel Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The label of the part location, such as a silk-screened name or a printed label.
Type	string or null
Read Only	True
Added	iLO6 1.05

Slots[{item}].Location.Placement Slots[{item}].Location.Placement.AdditionalInfo Member of PCIeSlots.v1_3_0.PCIeSlots


Description	Area designation or other additional info.
Type	string or null
Read Only	False
Added	iLO6 1.05

Slots[{item}].Location.Placement.Rack Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The name of a rack location within a row.
Type	string or null
Read Only	False
Added	iLO6 1.05

Slots[{item}].Location.Placement.RackOffset Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The vertical location of the item, in terms of RackOffsetUnits.
Type	integer or null
Read Only	False
Added	iLO6 1.05

Slots[{item}].Location.Placement.RackOffsetUnits Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The type of rack unit in use.
Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`OpenU`	A rack unit that is equal to 48 mm (1.89 in).
`EIA_310`	A rack unit that is equal to 1.75 in (44.45 mm).

Slots[{item}].Location.Placement.Row Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The name of the row.
Type	string or null
Read Only	False
Added	iLO6 1.05

Slots[{item}].PCIeType Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The PCIe specification supported by this slot.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Gen1`	A PCIe v1.0 slot.
`Gen2`	A PCIe v2.0 slot.
`Gen3`	A PCIe v3.0 slot.
`Gen4`	A PCIe v4.0 slot.
`Gen5`	A PCIe v5.0 slot.

Slots[{item}].SlotType Member of PCIeSlots.v1_3_0.PCIeSlots


Description	The PCIe slot type for this slot.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`FullLength`	Full-Length PCIe slot.
`HalfLength`	Half-Length PCIe slot.
`LowProfile`	Low-Profile or Slim PCIe slot.
`Mini`	Mini PCIe slot.
`M2`	PCIe M.2 slot.
`OEM`	An OEM-specific slot.
`OCP3Small`	Open Compute Project 3.0 small form factor slot.
`OCP3Large`	Open Compute Project 3.0 large form factor slot.
`U2`	PCIe U.2 slot or bay

Slots[{item}].Status Member of PCIeSlots.v1_3_0.PCIeSlots See the Redfish standard schema and specification for information on common Status object.

Port

@odata.type: "#Port.v1_6_1.Port"

A Port represents a discrete physical port capable of connecting to a network. The Data Source is either DCi or RDE. HPE OEM section shall be present only for DCi Data Source.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/networkadapters/{item}/ports/{item}`	GET POST PATCH
`/redfish/v1/chassis/{item}/networkadapters/{item}/ports/{item}/settings`	GET PATCH
`/redfish/v1/systems/{item}/networkinterfaces/{item}/ports/{item}`	GET POST PATCH
`/redfish/v1/systems/{item}/networkinterfaces/{item}/ports/{item}/settings`	GET PATCH
`/redfish/v1/systems/{item}/storage/{item}/controllers/{item}/ports/{item}`	GET PATCH
`/redfish/v1/systems/{item}/storage/{item}/storagecontrollers/{item}/ports/{item}`	GET PATCH

Links to other Resources

Link Name	Destination type
`Members[]`	Port

@Redfish.Settings

Member of Port.v1_6_1.Port See the Redfish standard schema and specification for information on common @Redfish properties.

ActiveWidth

Member of Port.v1_6_1.Port


Description	The number of active lanes for this interface.
Type	integer
Read Only	True
Added	iLO6 1.05

CapableProtocolVersions (array)

Member of Port.v1_6_1.Port

CapableProtocolVersions is an array containing elements of:

CapableProtocolVersions[{item}] Member of Port.v1_6_1.Port


Type	string or null
Read Only	True
Added	iLO6 1.05

CurrentProtocolVersion

Member of Port.v1_6_1.Port


Description	The protocol version being sent over this port.
Type	string or null
Read Only	True
Added	iLO6 1.05

CurrentSpeedGbps

Member of Port.v1_6_1.Port


Description	The current speed of this port.
Type	number or null
Read Only	True
Added	iLO6 1.05

Enabled

Member of Port.v1_6_1.Port


Description	An indication of whether this port is enabled.
Type	boolean
Read Only	False
Added	iLO6 1.05

Ethernet

Ethernet.AssociatedMACAddresses (array) Member of Port.v1_6_1.Port

AssociatedMACAddresses is an array containing elements of:

AssociatedMACAddresses[{item}] Member of Port.v1_6_1.Port


Type	string or null
Read Only	True
Added	iLO6 1.05

Ethernet.EEEEnabled Member of Port.v1_6_1.Port


Description	Indicates whether IEEE 802.3az Energy-Efficient Ethernet (EEE) is enabled on this port.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

Ethernet.FlowControlConfiguration Member of Port.v1_6_1.Port


Description	The locally configured 802.3x flow control setting for this port.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`None`	No IEEE 802.3x flow control is enabled on this port.
`TX`	IEEE 802.3x flow control may be initiated by this station.
`RX`	IEEE 802.3x flow control may be initiated by the link partner.
`TX_RX`	IEEE 802.3x flow control may be initiated by this station or the link partner.

Ethernet.FlowControlStatus Member of Port.v1_6_1.Port


Description	The 802.3x flow control behavior negotiated with the link partner for this port.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`None`	No IEEE 802.3x flow control is enabled on this port.
`TX`	IEEE 802.3x flow control may be initiated by this station.
`RX`	IEEE 802.3x flow control may be initiated by the link partner.
`TX_RX`	IEEE 802.3x flow control may be initiated by this station or the link partner.

Ethernet.LLDPEnabled Member of Port.v1_6_1.Port


Description	Enable/disable LLDP for this port.
Type	boolean
Read Only	False
Added	iLO6 1.05

Ethernet.LLDPReceive Ethernet.LLDPReceive.ChassisId Member of Port.v1_6_1.Port


Description	Link Layer Data Protocol (LLDP) chassis ID received from the remote partner across this link.
Type	string or null
Read Only	True
Added	iLO6 1.05

Ethernet.LLDPReceive.ChassisIdSubtype Member of Port.v1_6_1.Port


Description	The type of identifier used for the chassis ID received from the remote partner across this link.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in RFC4133.
`IfAlias`	Interface alias, based on the ifAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in RFC4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the ifName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.
`NotTransmitted`	No data to be sent to/received from remote partner.

Ethernet.LLDPReceive.ManagementAddressIPv4 Member of Port.v1_6_1.Port


Description	The IPv4 management address received from the remote partner across this link.
Type	string or null
Read Only	True
Added	iLO6 1.05

Ethernet.LLDPReceive.ManagementAddressIPv6 Member of Port.v1_6_1.Port


Description	The IPv6 management address received from the remote partner across this link.
Type	string or null
Read Only	True
Added	iLO6 1.05

Ethernet.LLDPReceive.ManagementAddressMAC Member of Port.v1_6_1.Port


Description	The management MAC address received from the remote partner across this link.
Type	string or null
Read Only	True
Added	iLO6 1.05

Ethernet.LLDPReceive.ManagementVlanId Member of Port.v1_6_1.Port


Description	The management VLAN ID received from the remote partner across this link.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Ethernet.LLDPReceive.PortId Member of Port.v1_6_1.Port


Description	A colon delimited string of hexadecimal octets identifying a port.
Type	string or null
Read Only	True
Added	iLO6 1.05

Ethernet.LLDPReceive.PortIdSubtype Member of Port.v1_6_1.Port


Description	The port ID subtype received from the remote partner across this link.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in RFC4133.
`IfAlias`	Interface alias, based on the ifAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in RFC4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the ifName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.
`NotTransmitted`	No data to be sent to/received from remote partner.

Ethernet.LLDPTransmit Ethernet.LLDPTransmit.ChassisId Member of Port.v1_6_1.Port


Description	Link Layer Data Protocol (LLDP) chassis ID.
Type	string or null
Read Only	False
Added	iLO6 1.05

Ethernet.LLDPTransmit.ChassisIdSubtype Member of Port.v1_6_1.Port


Description	The type of identifier used for the chassis ID.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in RFC4133.
`IfAlias`	Interface alias, based on the ifAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in RFC4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the ifName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.
`NotTransmitted`	No data to be sent to/received from remote partner.

Ethernet.LLDPTransmit.ManagementAddressIPv4 Member of Port.v1_6_1.Port


Description	The IPv4 management address to be transmitted from this endpoint.
Type	string or null
Read Only	False
Added	iLO6 1.05

Ethernet.LLDPTransmit.ManagementAddressIPv6 Member of Port.v1_6_1.Port


Description	The IPv6 management address to be transmitted from this endpoint.
Type	string or null
Read Only	False
Added	iLO6 1.05

Ethernet.LLDPTransmit.ManagementAddressMAC Member of Port.v1_6_1.Port


Description	The management MAC address to be transmitted from this endpoint.
Type	string or null
Read Only	False
Added	iLO6 1.05

Ethernet.LLDPTransmit.ManagementVlanId Member of Port.v1_6_1.Port


Description	The management VLAN ID to be transmitted from this endpoint.
Type	integer or null
Read Only	False
Added	iLO6 1.05

Ethernet.LLDPTransmit.PortId Member of Port.v1_6_1.Port


Description	A colon delimited string of hexadecimal octets identifying a port to be transmitted from this endpoint.
Type	string or null
Read Only	False
Added	iLO6 1.05

Ethernet.LLDPTransmit.PortIdSubtype Member of Port.v1_6_1.Port


Description	The port ID subtype to be transmitted from this endpoint.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in RFC4133.
`IfAlias`	Interface alias, based on the ifAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in RFC4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the ifName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.
`NotTransmitted`	No data to be sent to/received from remote partner.

Ethernet.WakeOnLANEnabled Member of Port.v1_6_1.Port


Description	Indicates whether Wake on LAN (WoL) is enabled on this port.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

FibreChannel

FibreChannel.AssociatedWorldWideNames (array) Member of Port.v1_6_1.Port

AssociatedWorldWideNames is an array containing elements of:

AssociatedWorldWideNames[{item}] Member of Port.v1_6_1.Port


Type	string or null
Read Only	True
Added	iLO6 1.10

FibreChannel.FabricName Member of Port.v1_6_1.Port


Description	The Fibre Channel Fabric Name provided by the switch.
Type	string or null
Read Only	True
Added	iLO6 1.05

FibreChannel.NumberDiscoveredRemotePorts Member of Port.v1_6_1.Port


Description	The number of ports not on the associated device that the associated device has discovered through this port.
Type	integer or null
Read Only	True
Added	iLO6 1.05

FibreChannel.PortConnectionType Member of Port.v1_6_1.Port


Description	The connection type of this port.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`NotConnected`	This port is not connected.
`NPort`	This port connects through an N-Port to a switch.
`PointToPoint`	This port connects in a Point-to-point configuration.
`PrivateLoop`	This port connects in a private loop configuration.
`PublicLoop`	This port connects in a public configuration.
`Generic`	This port connection type is a generic fabric port.
`ExtenderFabric`	This port connection type is an extender fabric port.
`FPort`	This port connection type is a fabric port.
`EPort`	This port connection type is an extender fabric port.
`TEPort`	This port connection type is an trunking extender fabric port.
`NPPort`	This port connection type is a proxy N port for N-Port virtualization.
`GPort`	This port connection type is a generic fabric port.
`NLPort`	This port connects in a node loop configuration.
`FLPort`	This port connects in a fabric loop configuration.
`EXPort`	This port connection type is an external fabric port.
`UPort`	This port connection type is unassigned.
`DPort`	This port connection type is a diagnostic port.

FunctionMaxBandwidth (array)

Member of Port.v1_6_1.Port

FunctionMaxBandwidth is an array containing elements of:

FunctionMaxBandwidth[{item}].AllocationPercent Member of Port.v1_6_1.Port


Description	The maximum bandwidth allocation percentage allocated to the corresponding network device function instance.
Type	integer or null
Read Only	False
Added	iLO6 1.05

FunctionMaxBandwidth[{item}].NetworkDeviceFunction The link to the network device function associated with this bandwidth setting of this network port. NetworkDeviceFunction is a link ("@odata.id": URI) to another resource.

FunctionMinBandwidth (array)

Member of Port.v1_6_1.Port

FunctionMinBandwidth is an array containing elements of:

FunctionMinBandwidth[{item}].AllocationPercent Member of Port.v1_6_1.Port


Description	The minimum bandwidth allocation percentage allocated to the corresponding network device function instance.
Type	integer or null
Read Only	False
Added	iLO6 1.05

FunctionMinBandwidth[{item}].NetworkDeviceFunction The link to the network device function associated with this bandwidth setting of this network port. NetworkDeviceFunction is a link ("@odata.id": URI) to another resource.

InterfaceEnabled

Member of Port.v1_6_1.Port


Description	An indication of whether the interface is enabled.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

LinkConfiguration (array)

Member of Port.v1_6_1.Port

LinkConfiguration is an array containing elements of:

LinkConfiguration[{item}].AutoSpeedNegotiationCapable Member of Port.v1_6_1.Port


Description	An indication of whether the port is capable of autonegotiating speed.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

LinkConfiguration[{item}].AutoSpeedNegotiationEnabled Member of Port.v1_6_1.Port


Description	Controls whether this port is configured to enable autonegotiating speed.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

LinkConfiguration[{item}].CapableLinkSpeedGbps (array) Member of Port.v1_6_1.Port

CapableLinkSpeedGbps is an array containing elements of:

CapableLinkSpeedGbps[{item}] Member of Port.v1_6_1.Port


Type	number or null
Read Only	True
Added	iLO6 1.05

LinkConfiguration[{item}].ConfiguredNetworkLinks (array) Member of Port.v1_6_1.Port

ConfiguredNetworkLinks is an array containing elements of:

ConfiguredNetworkLinks[{item}].ConfiguredLinkSpeedGbps Member of Port.v1_6_1.Port


Description	The link speed per lane this port is configured to use for autonegotiation.
Type	number or null
Read Only	False
Added	iLO6 1.05

ConfiguredNetworkLinks[{item}].ConfiguredWidth Member of Port.v1_6_1.Port


Description	The link width this port is configured to use for autonegotiation in conjunction with the link speed.
Type	integer or null
Read Only	False
Added	iLO6 1.05

LinkNetworkTechnology

Member of Port.v1_6_1.Port


Description	The link network technology capabilities of this port.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Ethernet`	The port is capable of connecting to an Ethernet network.
`InfiniBand`	The port is capable of connecting to an InfiniBand network.
`FibreChannel`	The port is capable of connecting to a Fibre Channel network.
`GenZ`	The port is capable of connecting to a Gen-Z fabric.

LinkState

Member of Port.v1_6_1.Port


Description	The desired link state for this interface.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	This link is enabled.
`Disabled`	This link is disabled.

LinkStatus

Member of Port.v1_6_1.Port


Description	The desired link status for this interface.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`LinkUp`	This link on this interface is up.
`Starting`	This link on this interface is starting. A physical link has been established, but the port is not able to transfer data.
`Training`	This physical link on this interface is training.
`LinkDown`	The link on this interface is down.
`NoLink`	No physical link detected on this interface.

LinkTransitionIndicator

Member of Port.v1_6_1.Port


Description	The number of link state transitions for this interface.
Type	integer
Read Only	False
Added	iLO6 1.05

Location

Location.PartLocation Location.PartLocation.LocationOrdinalValue Member of Port.v1_6_1.Port


Description	The number that represents the location of the part. If LocationType is `slot` and this unit is in slot 2, the LocationOrdinalValue is 2.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Location.PartLocation.LocationType Member of Port.v1_6_1.Port


Description	The location types for PartLocation.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Slot`	The slot as the type of location.
`Bay`	The bay as the type of location.
`Connector`	The connector as the type of location.
`Socket`	The socket as the type of location.
`Embedded`	Embedded within a part.

Location.PartLocation.Orientation Member of Port.v1_6_1.Port


Description	The orientation for the ordering of the part location ordinal value.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`FrontToBack`	The ordering for LocationOrdinalValue is front to back.
`BackToFront`	The ordering for the LocationOrdinalValue is back to front.
`TopToBottom`	The ordering for the LocationOrdinalValue is top to bottom.
`BottomToTop`	The ordering for LocationOrdinalValue is bottom to top.
`LeftToRight`	The ordering for the LocationOrdinalValue is left to right.
`RightToLeft`	The ordering for the LocationOrdinalValue is right to left.

Location.PartLocation.Reference Member of Port.v1_6_1.Port


Description	The reference area for the location of the part.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Top`	The part is in the top of the unit.
`Bottom`	The part is in the bottom of the unit.
`Front`	The part is in the front of the unit.
`Rear`	The part is in the rear of the unit.
`Left`	The part is on the left side of of the unit.
`Right`	The part is on the right side of the unit.
`Middle`	The part is in the middle of the unit.

Location.PartLocation.ServiceLabel Member of Port.v1_6_1.Port


Description	The label of the part location, such as a silk-screened name or a printed label.
Type	string or null
Read Only	True
Added	iLO6 1.05

Location.Placement Location.Placement.AdditionalInfo Member of Port.v1_6_1.Port


Description	Area designation or other additional info.
Type	string or null
Read Only	False
Added	iLO6 1.05

Location.Placement.Rack Member of Port.v1_6_1.Port


Description	The name of a rack location within a row.
Type	string or null
Read Only	False
Added	iLO6 1.05

Location.Placement.RackOffset Member of Port.v1_6_1.Port


Description	The vertical location of the item, in terms of RackOffsetUnits.
Type	integer or null
Read Only	False
Added	iLO6 1.05

Location.Placement.RackOffsetUnits Member of Port.v1_6_1.Port


Description	The type of rack unit in use.
Type	string or null
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`OpenU`	A rack unit that is equal to 48 mm (1.89 in).
`EIA_310`	A rack unit that is equal to 1.75 in (44.45 mm).

Location.Placement.Row Member of Port.v1_6_1.Port


Description	The name of the row.
Type	string or null
Read Only	False
Added	iLO6 1.05

LocationIndicatorActive

Member of Port.v1_6_1.Port


Description	An indicator allowing an operator to physically locate this resource.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

MaxFrameSize

Member of Port.v1_6_1.Port


Description	The maximum frame size supported by the port.
Type	integer or null
Read Only	True
Added	iLO6 1.05

MaxSpeedGbps

Member of Port.v1_6_1.Port


Description	The maximum speed of this port as currently configured.
Type	number or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.AutoNegotiationCapable

Member of Port.v1_6_1.Port


Description	Indicates the ability of this network port to autonegotiate link speed.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.ConfiguredNetworkLinks (array)

Member of Port.v1_6_1.Port

ConfiguredNetworkLinks is an array containing elements of:

ConfiguredNetworkLinks[{item}].ConfiguredLinkSpeedGbps Member of Port.v1_6_1.Port


Description	The link speed per lane this port is configured to use for autonegotiation.
Type	integer or null
Read Only	False
Added	iLO6 1.05

ConfiguredNetworkLinks[{item}].ConfiguredWidth Member of Port.v1_6_1.Port


Description	The number of lanes this port is configured to use for autonegotiation. If this property is omitted, the lane count shall default to one.
Type	integer or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.EvbData

Oem.Hpe.EvbData.Receiving Oem.Hpe.EvbData.Receiving.CdcpActive Member of Port.v1_6_1.Port


Description	True if a currently active IEEE 802.1Qbg CDCP TLV has been received from the link partner.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.ChannelActive Member of Port.v1_6_1.Port


Description	A currently unexpired HPE Channel Link Control or HPE Channel Description TLV has been received from the link partner.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.ChannelDescriptionLocalSequenceNumber Member of Port.v1_6_1.Port


Description	The link partner's HPE Channel Description sequence number that was last successfully received and processed.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.ChannelDescriptionRemoteSequenceNumber Member of Port.v1_6_1.Port


Description	The last HPE Channel Decsription sequence number sent on this link that was successfully received and processed by the link partner.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.ChannelDescriptionSubtype Member of Port.v1_6_1.Port


Description	The header subtype field of the last received HPE Channel Description TLV.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.ChannelLinkControlLocalSequenceNumber Member of Port.v1_6_1.Port


Description	The link partner's HPE Channel Link Control sequence number that was last successfully received and processed.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.ChannelLinkControlMCEnable Member of Port.v1_6_1.Port


Description	The Feature Indicators field, Management Controller (MC) Channel (SCID 4094) enabled state in the HPE CLC TLV being received from the link partner on this port.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.ChannelLinkControlRemoteSequenceNumber Member of Port.v1_6_1.Port


Description	The last HPE Channel Link control sequence number sent on this link that was successfully received and processed by the link partner.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.ChannelLinkControlSubtype Member of Port.v1_6_1.Port


Description	The header subtype field of the last received HPE Channel Link Control TLV.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.Role Member of Port.v1_6_1.Port


Description	The link partner's IEEE 802.1Qbg operating role.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`bridge`	Indicates the link partner is operating as a Bridge.
`station`	Indicates the link partner is operating as a Station.

Oem.Hpe.EvbData.Receiving.SChannelAssignments (array) Member of Port.v1_6_1.Port

SChannelAssignments is an array containing elements of:

SChannelAssignments[{item}].Scid Member of Port.v1_6_1.Port


Description	SCID value for this <SCID,SVID> S-Channel identifier pairreceived from the link partner on this port.
Type	integer or null
Read Only	True
Added	iLO6 1.05

SChannelAssignments[{item}].Svid Member of Port.v1_6_1.Port


Description	SVID assignment value for this <SCID,SVID> S-Channel identifier pair received from the link partner on this port. When 0 it indicates an assignment request is in progress.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.SChannelMaxCount Member of Port.v1_6_1.Port


Description	Indicates the number of S-Channels the link partner can support on this physical link.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.SChannelsSupported Member of Port.v1_6_1.Port


Description	When true this link supports S-Channels.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Receiving.VirtualLinkStatusVector Member of Port.v1_6_1.Port


Description	A bit vector indicating S-Channel status received from the link partner, 1=up, 0=down. S-Channel status bits are ordered by SCID from lowest numbered (first) to highest (last).
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting Oem.Hpe.EvbData.Transmitting.ChannelDescriptionData (array) Member of Port.v1_6_1.Port

ChannelDescriptionData is an array containing elements of:

ChannelDescriptionData[{item}].Descriptor0BandwidthCirMbps Member of Port.v1_6_1.Port


Description	The bandwidth Commited Information Rate (CIR) for this S-Channel, in Mbps.
Type	integer or null
Read Only	True
Added	iLO6 1.05

ChannelDescriptionData[{item}].Descriptor0BandwidthPirMbps Member of Port.v1_6_1.Port


Description	The bandwidth Peak Information Rate (PIR) for this S-Channel, in Mbps.
Type	integer or null
Read Only	True
Added	iLO6 1.05

ChannelDescriptionData[{item}].Descriptor0ChannelTerminationType Member of Port.v1_6_1.Port


Description	Indicates the termination provided for this S-Channel.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`primary-physical`	This S-Channel is presented to the host OS as a primary PCI physical function.
`SR-IOV-virtual`	This S-Channel is presented to the host OS as a PCI SR-IOV virtual function.
`secondary-physical`	This S-Channel is presented to the host OS as a secondary PCI physical function, i.e. a PCI physical function behind a bridge on the device.
`vSwitch-port`	This S-Channel is mapped to a Virtual Switch port.
`NCSI-port`	This S-Channel is mapped to the NCSI internal port for management.

ChannelDescriptionData[{item}].Descriptor0EthernetSupport Member of Port.v1_6_1.Port


Description	When true, this S-Channel supports Ethernet.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

ChannelDescriptionData[{item}].Descriptor0FCoESupport Member of Port.v1_6_1.Port


Description	When true, this S-Channel supports Fibre Channel over Ethernet (FCoE).
Type	boolean or null
Read Only	True
Added	iLO6 1.05

ChannelDescriptionData[{item}].Descriptor0PcpSupport Member of Port.v1_6_1.Port


Description	Indicates which IEEE 802.1Q Ethernet Priority Code Point (PCP) classes are supported on this S-Channel. When no PCPs are supported, the S-Channel makes no attempt to filter or control traffic class. A string of 1/0 characters indicating 1=enabled, 0=disabled. PCP classes are ordered from highest numbered 7 (first) to lowest 0 (last).
Type	string or null
Read Only	True
Added	iLO6 1.05

ChannelDescriptionData[{item}].Descriptor0RoCEESupport Member of Port.v1_6_1.Port


Description	When true, this S-Channel supports RDMA over Converged Enhanced Ethernet (RoCEE).
Type	boolean or null
Read Only	True
Added	iLO6 1.05

ChannelDescriptionData[{item}].Descriptor0Scid Member of Port.v1_6_1.Port


Description	The S-Channel identifier for this Descriptor0 instance.
Type	integer or null
Read Only	True
Added	iLO6 1.05

ChannelDescriptionData[{item}].Descriptor0iSCSISupport Member of Port.v1_6_1.Port


Description	When true, this S-Channel supports Internet SCSI (iSCSI).
Type	boolean or null
Read Only	True
Added	iLO6 1.05

ChannelDescriptionData[{item}].Descriptor1ConnectionID Member of Port.v1_6_1.Port


Description	A unique S-Channel identifer in UUID format.
Type	string or null
Read Only	True
Added	iLO6 1.05

ChannelDescriptionData[{item}].Descriptor1Scid Member of Port.v1_6_1.Port


Description	The S-Channel identifier for this Descriptor1 instance.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.ChannelDescriptionLocalSequenceNumber Member of Port.v1_6_1.Port


Description	This station's channel discovery local sequence number which will be transmitted to the link partner on this port.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.ChannelDescriptionRemoteSequenceNumber Member of Port.v1_6_1.Port


Description	The link partner's channel discovery local sequence number that was last successfully received and processed.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.ChannelDescriptorCount Member of Port.v1_6_1.Port


Description	The number of channel descriptor pairs being transmitted to the link partner on this port.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.ChannelLinkControlLocalSequenceNumber Member of Port.v1_6_1.Port


Description	This station's channel link control local sequence number which will be transmitted to the link partner on this port.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.ChannelLinkControlMCEnable Member of Port.v1_6_1.Port


Description	The Feature Indicators field, Management Controller (MC) Channel (SCID 4094) enabled state in the HPE CLC TLV being transmitted to the link partner on this port.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.ChannelLinkControlRemoteSequenceNumber Member of Port.v1_6_1.Port


Description	The link partner's channel link control local sequence number that was last successfully received and processed.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.Role Member of Port.v1_6_1.Port


Description	This port's IEEE 802.1Qbg role being advertised on the link.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`bridge`	Indicates this link is operating locally as a Bridge.
`station`	Indicates this link is operating locally as a Station.

Oem.Hpe.EvbData.Transmitting.SChannelAssignments (array) Member of Port.v1_6_1.Port

SChannelAssignments is an array containing elements of:

SChannelAssignments[{item}].Scid Member of Port.v1_6_1.Port


Description	SCID value for this <SCID,SVID> S-Channel identifier pair being transmitted to the link partner on this port.
Type	integer or null
Read Only	True
Added	iLO6 1.05

SChannelAssignments[{item}].Svid Member of Port.v1_6_1.Port


Description	SVID assignment value for this <SCID,SVID> S-Channel identifier pair being transmitted to the link partner on this port. When 0 it indicates an SVID assignment request to the link partner is in progress.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.SChannelMaxCount Member of Port.v1_6_1.Port


Description	The Channel Capacity value being advertised to the link partner. It indicates the number of S-Channels this station can support on this physical link.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.SChannelsSupported Member of Port.v1_6_1.Port


Description	When true, indicates that this physical link has S-Channel capability.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.EvbData.Transmitting.VirtualLinkStatusVector Member of Port.v1_6_1.Port


Description	A bit vector indicating S-Channel status being transmitted on this link, 1=up, 0=down. S-Channel status bits are ordered by SCID from lowest numbered (first) to highest (last).
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData

Oem.Hpe.LldpData.Receiving Oem.Hpe.LldpData.Receiving.ChassisID Member of Port.v1_6_1.Port


Description	The LLDP chassis ID received from the link partner.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.ChassisIDSubtype Member of Port.v1_6_1.Port


Description	The IEEE 802.1AB-2009 chassis ID subtype received from the link partner.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in IETF RFC 4133.
`IfAlias`	Interface alias, based on the IfAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in IETF RFC 4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the IfName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC 3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.

Oem.Hpe.LldpData.Receiving.Dcb Oem.Hpe.LldpData.Receiving.Dcb.ApplicationPriorityReceived Member of Port.v1_6_1.Port


Description	True when an unexpired Data Center Bridging (DCB) Application Priority Table TLV has been received.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.ApplicationPriorityTable (array) Member of Port.v1_6_1.Port

ApplicationPriorityTable is an array containing elements of:

ApplicationPriorityTable[{item}].ApplicationPriority Member of Port.v1_6_1.Port


Description	Indicates which priority level is assigned for this application protocol.
Type	integer or null
Read Only	True
Added	iLO6 1.05

ApplicationPriorityTable[{item}].ApplicationProtocol Member of Port.v1_6_1.Port


Description	An integer value indicating application protocol identity, of the type described by DCBApplicationSelect.
Type	integer or null
Read Only	True
Added	iLO6 1.05

ApplicationPriorityTable[{item}].ApplicationSelect Member of Port.v1_6_1.Port


Description	Indentifies the type of the DCBApplicationProtocol property.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`reserved`	Reserved select value.
`default-Ethertype`	Default priority. Use when priority not otherwise specified.
`TCP-SCTP`	DCBApplicationProtocol value is a well known port over TCP or SCTP.
`UDP-DCCP`	DCBApplicationProtocol value is a well known port over UDP or DCCP.
`TCP-SCTP-UDP-DCCP`	DCBApplicationProtocol is a well known port over TCP, SCTP, SCTP, or DCCP.

Oem.Hpe.LldpData.Receiving.Dcb.Ets Oem.Hpe.LldpData.Receiving.Dcb.Ets.BandwidthAssignmentTable (array) Member of Port.v1_6_1.Port

BandwidthAssignmentTable is an array containing elements of:

BandwidthAssignmentTable[{item}] Member of Port.v1_6_1.Port


Description	One entry in the DCB ETS Traffic Class (TC) Bandwidth Assignment Table.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Ets.CreditBasedShaper Member of Port.v1_6_1.Port


Description	True if the link partner supports the Credit-based Shaper (CBS) transmmission selection algortithm.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Ets.MaximumTrafficClassCount Member of Port.v1_6_1.Port


Description	The maximum number of traffic classes supported by the link partner.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Ets.PriorityAssignmentTable (array) Member of Port.v1_6_1.Port

PriorityAssignmentTable is an array containing elements of:

PriorityAssignmentTable[{item}] Member of Port.v1_6_1.Port


Description	One entry in the DCB ETS Priority Assignment Table indicating this priority's Traffic Class assignment.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Ets.TlvReceived Member of Port.v1_6_1.Port


Description	True when an unexpired DCB Enhanced Transmission Selection (ETS) TLV has been received.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Ets.TrafficSelectionAlgorithmTable (array) Member of Port.v1_6_1.Port

TrafficSelectionAlgorithmTable is an array containing elements of:

TrafficSelectionAlgorithmTable[{item}] Member of Port.v1_6_1.Port


Description	An assignment of a Traffic Selection Algorithm (TSA) to a traffic class.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`strict`	Strict priority algorithm.
`CBS`	Credit-Based Shaper algorithm.
`ETS`	Enhanced Traffic Selection algorithm.
`vendor`	Vendor specific algorithm for use with DCB.

Oem.Hpe.LldpData.Receiving.Dcb.Ets.Willing Member of Port.v1_6_1.Port


Description	True if the link partner is willing to accept ETS configurations.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.LocalEqualRemote Member of Port.v1_6_1.Port


Description	True when the transmitted and received contents match for both DCB ETS and PFC TLVs.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Pfc Oem.Hpe.LldpData.Receiving.Dcb.Pfc.EnabledTrafficClasses Member of Port.v1_6_1.Port


Description	A bit string indicating which priority levels have PFC enabled, 1=enabled. PFC levels are bit ordered from 7 (first) to 0 (last).
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Pfc.MacSecurityBypassCapability Member of Port.v1_6_1.Port


Description	True when the link partner has the ability to bypass MAC security in order to improve PFC responsiveness.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Pfc.MaximumTrafficClassCount Member of Port.v1_6_1.Port


Description	Indicates the maximum number of traffic classes that the link partner can simultaneously support.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Pfc.TlvReceived Member of Port.v1_6_1.Port


Description	True when an unexpired DCB Priority Flow Control (PFC) TLV has been received.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Pfc.Willing Member of Port.v1_6_1.Port


Description	True if the LLDP link partner is willing to accept PFC configurations.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.Dcb.Version Member of Port.v1_6_1.Port


Description	The DCB version supported by the link partner.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`unknown`	Unknown
`CEE`	Converged Enhanced Ethernet
`IEEE`	IEEE 802.1Q

Oem.Hpe.LldpData.Receiving.ManagementAddress Member of Port.v1_6_1.Port


Description	The management address received from the link partner.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.ManagementAddressOID Member of Port.v1_6_1.Port


Description	An object identifier for the hardware or protocol entity associated with the management address.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.ManagementAddressReceived Member of Port.v1_6_1.Port


Description	True when a currently unexpired management address TLV has been received from the link partner.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.ManagementAddressType Member of Port.v1_6_1.Port


Description	The type of management address received from the link partner.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`IPv4`	Type 1 (IP version 4).
`IPv6`	Type 2 (IP version 6).
`all802`	Type 6 (All 802 media plus Ethernet 'canonical format').

Oem.Hpe.LldpData.Receiving.ManagementIFNumSubtype Member of Port.v1_6_1.Port


Description	Management interface number subtype.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`unknown`	Interface number is not known.
`ifIndex`	Interface number is based on the ifIndex MIB object.
`sysPortNum`	Interface number is based on the system port numbering convention.

Oem.Hpe.LldpData.Receiving.ManagementIFNumber Member of Port.v1_6_1.Port


Description	Management interface number received from the link partner represented as a colon delimited string of hexadecimal octets.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.ManagementVlanReceived Member of Port.v1_6_1.Port


Description	True when a currently unexpired management address VID TLV has been received from the link partner.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.NearestBridgeTtlExpired Member of Port.v1_6_1.Port


Description	True when the LLDP PDU most recently received from the link partner has expired.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.PortDescription Member of Port.v1_6_1.Port


Description	The remote link partner's port description.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.PortID Member of Port.v1_6_1.Port


Description	A colon delimited string of hexadecimal octets received from the link partner identifying its port.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Receiving.PortIDSubtype Member of Port.v1_6_1.Port


Description	The port ID subtype enumeration from IEEE 802.1AB-2009 Table 8-3, which indicates the format for the PortID property.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in IETF RFC 4133.
`IfAlias`	Interface alias, based on the IfAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in IETF RFC 4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the IfName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC 3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.

Oem.Hpe.LldpData.Receiving.SystemDescription Member of Port.v1_6_1.Port


Description	The system description received from the link partner.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Transmitting Oem.Hpe.LldpData.Transmitting.ChassisID Member of Port.v1_6_1.Port


Description	The Link Layer Data Protocol (LLDP) chassis ID being transmitted on this link.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Transmitting.ChassisIDSubtype Member of Port.v1_6_1.Port


Description	The IEEE 802.1AB-2009 chassis ID subtype being transmitted on this link.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in IETF RFC 4133.
`IfAlias`	Interface alias, based on the IfAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in IETF RFC 4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the IfName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC 3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.

Oem.Hpe.LldpData.Transmitting.ManagementAddresses (array) Member of Port.v1_6_1.Port

ManagementAddresses is an array containing elements of:

ManagementAddresses[{item}].ManagementIPAddress Member of Port.v1_6_1.Port


Description	A management address.
Type	string or null
Read Only	True
Added	iLO6 1.05

ManagementAddresses[{item}].ManagementIPAddressType Member of Port.v1_6_1.Port


Description	The IANA type of this management address.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`IPv4`	Type 1 (IP version 4).
`IPv6`	Type 2 (IP version 6).
`all802`	Type 6 (All 802 media plus Ethernet 'canonical format').

Oem.Hpe.LldpData.Transmitting.ManagementCvlanIDTransmitted Member of Port.v1_6_1.Port


Description	When true, indicates that a management CVLAN ID is being transmitted on this link.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Transmitting.PortDescription Member of Port.v1_6_1.Port


Description	An alphanumeric string describing this link.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Transmitting.PortID Member of Port.v1_6_1.Port


Description	A colon delimited string of hexadecimal octets identifying this port.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.LldpData.Transmitting.PortIDSubtype Member of Port.v1_6_1.Port


Description	The port ID subtype from IEEE 802.1AB-2009 Table 8-3.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`ChassisComp`	Chassis component, based in the value of entPhysicalAlias in IETF RFC 4133.
`IfAlias`	Interface alias, based on the IfAlias MIB object.
`PortComp`	Port component, based in the value of entPhysicalAlias in IETF RFC 4133.
`MacAddr`	MAC address, based on an agent detected unicast source address as defined in IEEE Std. 802.
`NetworkAddr`	Network address, based on an agent detected network address.
`IfName`	Interface name, based on the IfName MIB object.
`AgentId`	Agent circuit ID, based on the agent-local identifier of the circuit as defined in RFC 3046.
`LocalAssign`	Locally assigned, based on a alpha-numeric value locally assigned.

Oem.Hpe.LldpData.Transmitting.SystemDescription Member of Port.v1_6_1.Port


Description	A textual description of this system.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.PortDiagnosticEnableLocalLoopback

Member of Port.v1_6_1.Port


Description	When true, local loopback is active on this port. PortDiagnosticsEnabled must first be true in order to set this property to true.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.PortDiagnosticEnableRemoteLoopback

Member of Port.v1_6_1.Port


Description	When true, remote loopback is active on this port. PortDiagnosticsEnabled must first be true in order to set this property to true.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.PortDiagnosticLocalLoopbackCapable

Member of Port.v1_6_1.Port


Description	When true, the port has local loopback capability.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.PortDiagnosticRemoteLoopbackCapable

Member of Port.v1_6_1.Port


Description	When true, the port has remote loopback capability.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.PortDiagnosticsEnabled

Member of Port.v1_6_1.Port


Description	When true, diagnostic features are enabled on this port.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.VirtualFunctionAllocations (array)

Member of Port.v1_6_1.Port

VirtualFunctionAllocations is an array containing elements of:

VirtualFunctionAllocations[{item}].NetworkDeviceFunction The logical network device function to which this virtual function allocation applies. NetworkDeviceFunction is a link ("@odata.id": URI) to another resource.

VirtualFunctionAllocations[{item}].VirtualFunctionsAllocated Member of Port.v1_6_1.Port


Description	The number of virtual functions allocated to this logical network device function instance.
Type	number or null
Read Only	False
Added	iLO6 1.05

PortId

Member of Port.v1_6_1.Port


Description	The label of this port on the physical package for this port.
Type	string or null
Read Only	True
Added	iLO6 1.05

PortMedium

Member of Port.v1_6_1.Port


Description	The physical connection medium for this port.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Electrical`	This port has an electrical cable connection.
`Optical`	This port has an optical cable connection.

PortProtocol

Member of Port.v1_6_1.Port


Description	The protocol being sent over this port.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Ethernet`	Ethernet.
`FC`	Fibre Channel.
`FCoE`	Fibre Channel over Ethernet (FCoE).
`GenZ`	GenZ.
`InfiniBand`	InfiniBand.
`SAS`	Serial Attached SCSI.
`MultiProtocol`	Multiple Protocols.
`PCIe`	PCI Express.
`AHCI`	Advanced Host Controller Interface (AHCI).
`UHCI`	Universal Host Controller Interface (UHCI).
`SATA`	Serial AT Attachment.
`USB`	Universal Serial Bus (USB).
`NVMe`	Non-Volatile Memory Express (NVMe).
`iSCSI`	Internet SCSI.
`FCP`	Fibre Channel Protocol for SCSI.
`FICON`	FIbre CONnection (FICON).
`NVMeOverFabrics`	NVMe over Fabrics.
`SMB`	Server Message Block (SMB). Also known as the Common Internet File System (CIFS).
`NFSv3`	Network File System (NFS) version 3.
`NFSv4`	Network File System (NFS) version 4.
`HTTP`	Hypertext Transport Protocol (HTTP).
`HTTPS`	Hypertext Transfer Protocol Secure (HTTPS).
`FTP`	File Transfer Protocol (FTP).
`SFTP`	SSH File Transfer Protocol (SFTP).
`iWARP`	Internet Wide Area RDMA Protocol (iWARP).
`RoCE`	RDMA over Converged Ethernet Protocol.
`RoCEv2`	RDMA over Converged Ethernet Protocol Version 2.
`I2C`	Inter-Integrated Circuit Bus.
`TCP`	Transmission Control Protocol (TCP).
`UDP`	User Datagram Protocol (UDP).
`TFTP`	Trivial File Transfer Protocol (TFTP).
`NVLink`	NVLink.
`OEM`	OEM-specific.
`DisplayPort`	DisplayPort.
`HDMI`	HDMI.
`VGA`	VGA.
`DVI`	DVI.

PortType

Member of Port.v1_6_1.Port


Description	The type of this port.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`UpstreamPort`	This port connects to a host device.
`DownstreamPort`	This port connects to a target device.
`InterswitchPort`	This port connects to another switch.
`ManagementPort`	This port connects to a switch manager.
`BidirectionalPort`	This port connects to any type of device.
`UnconfiguredPort`	This port has not yet been configured.

SignalDetected

Member of Port.v1_6_1.Port


Description	An indication of whether a signal is detected on this interface.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Status

Member of Port.v1_6_1.Port See the Redfish standard schema and specification for information on common Status object.

Width

Member of Port.v1_6_1.Port


Description	The number of lanes, phys, or other physical transport links that this port contains.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Actions

Port.Reset Member of Port.v1_6_1.Port

Parameters:

target (string)

Link to invoke action

ResetValue (string)

Reset Port

Value	Description
GracefulRestart	Shut down gracefully and restart the system.
GracefulShutdown	Shut down gracefully and power off.
PowerCycle	Power cycle the unit. Behaves like a full power removal, followed by a power restore to the resource.
On	Turn on the unit.
ForceOff	Turn off the unit immediately (non-graceful shutdown).
PushPowerButton	Simulate the pressing of the physical power button on this unit.
ForceOn	Turn on the unit immediately.
ForceRestart	Shut down immediately and non-gracefully and restart the system.
Nmi	Generate a diagnostic interrupt, which is usually an NMI on x86 systems, to stop normal operations, complete diagnostic actions, and, typically, halt the system.

PortCollection

@odata.type: "#PortCollection.PortCollection"

A Collection of Port resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/networkadapters/{item}/ports`	GET
`/redfish/v1/systems/{item}/networkinterfaces/{item}/ports`	GET POST PATCH

Links to other Resources

Link Name	Destination type
`Members[]`	Port

Members (array)

Member of PortCollection.PortCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of PortCollection.PortCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of PortCollection.PortCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

Power

@odata.type: "#Power.v1_3_0.Power"

The Power resource describes the Power Metrics. It represents the properties for Power Consumption and Power Limiting.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/power`	GET PATCH

Links to other Resources

Link Name	Destination type
`Oem/Hpe/Links/FederatedGroupCapping`	HpeiLOFederatedGroupCapping
`Oem/Hpe/Links/PowerMeter`	HpePowerMeter
`Redundancy[]/RedundancySet[]`	Power
`Oem/Hpe/Links/FastPowerMeter`	HpePowerMeter

Oem.Hpe.BatteryBackedUnits (array)

Member of Power.v1_3_0.Power

BatteryBackedUnits is an array containing elements of:

BatteryBackedUnits[{item}].BBUStatus BatteryBackedUnits[{item}].BBUStatus.Health Member of Power.v1_3_0.Power


Description	This represents the health state of this resource in the absence of its dependent resources.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`OK`	Normal
`Warning`	A condition exists that requires attention
`Critical`	A critical condition exists that requires immediate attention

BatteryBackedUnits[{item}].BBUStatus.HealthRollup Member of Power.v1_3_0.Power


Description	This represents the overall health state from the view of this resource.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`OK`	Normal
`Warning`	A condition exists that requires attention
`Critical`	A critical condition exists that requires immediate attention

BatteryBackedUnits[{item}].BBUStatus.State Member of Power.v1_3_0.Power


Description	This indicates the known state of the resource, such as if it is enabled.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Enabled`	This function or resource has been enabled.
`Disabled`	This function or resource has been disabled.
`StandbyOffline`	This function or resource is enabled, but awaiting an external action to activate it.
`StandbySpare`	This function or resource is part of a redundancy set and is awaiting a failover or other external action to activate it.
`InTest`	This function or resource is undergoing testing.
`Starting`	This function or resource is starting.
`Absent`	This function or resource is not present or not detected.
`UnavailableOffline`	This function or resource is present but cannot be used.
`Deferring`	The element will not process any commands but will queue new requests.
`Quiesced`	The element is enabled but only processes a restricted set of commands.
`Updating`	The element is updating and may be unavailable or degraded.

BatteryBackedUnits[{item}].BayNumber Member of Power.v1_3_0.Power


Description	Bay number of the battery backed unit.
Type	integer
Read Only	True
Added	iLO6 1.05

BatteryBackedUnits[{item}].CapacityWatts Member of Power.v1_3_0.Power


Description	Total capacity (in Watts) of the battery backed unit.
Type	integer
Read Only	True
Added	iLO6 1.05

BatteryBackedUnits[{item}].CutOffSetPointmAh Member of Power.v1_3_0.Power


Description	Cut off threshold (mAh) where battery backed unit stops supplying power to the server.
Type	integer
Read Only	True
Added	iLO6 1.05

BatteryBackedUnits[{item}].FirmwareVersion Member of Power.v1_3_0.Power


Description	Firmware version of the battery backed unit.
Type	string
Read Only	True
Added	iLO6 1.05

BatteryBackedUnits[{item}].PercentCharge Member of Power.v1_3_0.Power


Description	Percentage charge remaining for the battery backed unit.
Type	integer
Read Only	True
Added	iLO6 1.05

BatteryBackedUnits[{item}].RemainingCapacitymAh Member of Power.v1_3_0.Power


Description	Remaining capacity (mAh) of the battery backed unit.
Type	integer
Read Only	True
Added	iLO6 1.05

BatteryBackedUnits[{item}].SerialNumber Member of Power.v1_3_0.Power


Description	Serial number of the battery backed unit.
Type	string
Read Only	True
Added	iLO6 1.05

BatteryBackedUnits[{item}].TimeToCutOffSeconds Member of Power.v1_3_0.Power


Description	Run time (in seconds) available with the battery backed unit until cut off. This is detected only when battery is charging or discharging, otherwise set to 0.
Type	integer
Read Only	True
Added	iLO6 1.05

BatteryBackedUnits[{item}].TimeToFullChargeMinutes Member of Power.v1_3_0.Power


Description	Time required (in minutes) to fully charge the battery backed unit. This is detected only when battery is charging or discharging, otherwise set to 0.
Type	integer
Read Only	True
Added	iLO6 1.05

BatteryBackedUnits[{item}].UsableCapacitymAh Member of Power.v1_3_0.Power


Description	Usable capacity (mAh) of the battery backed unit.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.BbuPowerSupply

Member of Power.v1_3_0.Power


Description	Battery Backup Unit Power Supply action determines what will occur when a server is running on battery power.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`DoNothing`	No action will be taken when a server switches to battery power.
`MomentaryPowerButtonPress`	Momentary virtual power button press which should shutdown host operating system when pressed.
`HostShutdown`	Shutdown message sent to host operating system with installed management software to initiate a shutdown.

Oem.Hpe.BrownoutRecoveryEnabled

Member of Power.v1_3_0.Power


Description	When a brownout condition occurs in the server, this setting will determine if the server should recover from it.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.Domains (array)

Member of Power.v1_3_0.Power

Domains is an array containing elements of:

Domains[{item}].DomainName Member of Power.v1_3_0.Power


Description	Power Supply Domain Name.
Type	string
Read Only	True
Added	iLO6 1.10

The following are the supported values:

Value
`System`
`GPU`

Domains[{item}].HighEfficiencyMode Member of Power.v1_3_0.Power


Description	The redundant power supply mode that will be used when redundant power supplies are configured.
Type	string or null
Read Only	True
Added	iLO6 1.10

The following are the supported values:

Value
`Null`
`Auto`
`Balanced`
`Even`
`Odd`
`NoSupport`

Domains[{item}].PowerSupplies (array) Member of Power.v1_3_0.Power

PowerSupplies is an array containing elements of:

PowerSupplies[{item}].@odata.id Member of Power.v1_3_0.Power


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Domains[{item}].PowerSupplyRedundancy Member of Power.v1_3_0.Power


Description	This indicates if the Power Supply is redundant or not.
Type	string
Read Only	True
Added	iLO6 1.10

The following are the supported values:

Value	Description
`Redundant`	The power supplies are Redundant.
`NonRedundant`	The power supplies are not Redundant.
`FailedRedundant`	The Redundant power supply has failed.
`Unknown`	The Redundant state is unknown.

Domains[{item}].Status Member of Power.v1_3_0.Power See the Redfish standard schema and specification for information on common Status object.

Oem.Hpe.FanPowerRequirement

Member of Power.v1_3_0.Power


Description	Cooling challenge bucket definition.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.FanPowerRequirementErrors

Member of Power.v1_3_0.Power


Description	Cooling challenge errors.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.FanPowerRequirementVersion

Member of Power.v1_3_0.Power


Description	Version of the Synergy cooling table bucket definitions.
Type	integer
Read Only	True
Added	iLO6 1.05

Oem.Hpe.HasCpuPowerMetering

Member of Power.v1_3_0.Power


Description	Indicates if the system has CPU power metering.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.HasDimmPowerMetering

Member of Power.v1_3_0.Power


Description	Indicates if the system has DIMM power metering.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.HasGpuPowerMetering

Member of Power.v1_3_0.Power


Description	Indicates if the system has GPU power metering.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.HasPowerMetering

Member of Power.v1_3_0.Power


Description	Indicates if the system has power metering.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.HighEfficiencyMode

Member of Power.v1_3_0.Power


Description	The redundant power supply mode that will be used when redundant power supplies are configured.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Null`
`Auto`
`Balanced`
`Even`
`Odd`
`NoSupport`

Oem.Hpe.MinimumSafelyAchievableCap

Member of Power.v1_3_0.Power


Description	Minimum Safely Achievable Cap is the lowest cap value that is safe for a group power manager to apply to a particular server. It can either be identical to or slightly greater than the 0 percent cap value calculated during ROM power burn.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.MinimumSafelyAchievableCapValid

Member of Power.v1_3_0.Power


Description	Indicates if the msac is valid. msac is valid only if this is true.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.SNMPPowerThresholdAlert

Oem.Hpe.SNMPPowerThresholdAlert.DurationInMin Member of Power.v1_3_0.Power


Description	Sets the length of time, in minutes, that power consumption must remain above the warning threshold before an SNMP alert is triggered. The maximum duration is 240 minutes, and the duration must be a multiple of 5.
Type	integer
Read Only	False
Added	iLO6 1.05

Oem.Hpe.SNMPPowerThresholdAlert.ThresholdWatts Member of Power.v1_3_0.Power


Description	Sets the power consumption threshold (watts). If power consumption exceeds this value for the specified time duration, an SNMP alert is triggered.
Type	integer
Read Only	False
Added	iLO6 1.05

Oem.Hpe.SNMPPowerThresholdAlert.Trigger Member of Power.v1_3_0.Power


Description	Trigger determines whether alerts are based on peak power consumption, average power consumption, or if they are disabled. Trigger property can only be enabled if the ThresholdWatts and DurationInMin values are specified/configured.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value
`Disabled`
`AveragePowerConsumption`
`PeakPowerConsumption`

PowerControl (array)

Member of Power.v1_3_0.Power

PowerControl is an array containing elements of:

PowerControl[{item}].@odata.id Member of Power.v1_3_0.Power


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

PowerControl[{item}].MemberId Member of Power.v1_3_0.Power


Description	This is the identifier for the member within the collection.
Type	string
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerAllocatedWatts Member of Power.v1_3_0.Power


Description	The total amount of power that has been allocated (or budegeted)to chassis resources.
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerAvailableWatts Member of Power.v1_3_0.Power


Description	The amount of power not already budgeted and therefore available for additional allocation. (powerCapacity - powerAllocated). This indicates how much reserve power capacity is left.
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerCapacityWatts Member of Power.v1_3_0.Power


Description	The total amount of power available to the chassis for allocation. This may the power supply capacity, or power budget assigned to the chassis from an up-stream chassis.
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerConsumedWatts Member of Power.v1_3_0.Power


Description	The actual power being consumed by the chassis.
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerLimit PowerControl[{item}].PowerLimit.CorrectionInMs Member of Power.v1_3_0.Power


Description	The time required for the limiting process to reduce power consumption to below the limit.
Type	integer or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerLimit.LimitException Member of Power.v1_3_0.Power


Description	The action that is taken if the power cannot be maintained below the LimitInWatts.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`NoAction`	Take no action when the limit is exceeded.
`HardPowerOff`	Turn the power off immediately when the limit is exceeded.
`LogEventOnly`	Log an event when the limit is exceeded, but take no further action.
`Oem`	Take an OEM-defined action.

PowerControl[{item}].PowerLimit.LimitInWatts Member of Power.v1_3_0.Power


Description	The Power limit in watts. Set to null to disable power capping.
Type	number or null
Read Only	False
Added	iLO6 1.05

PowerControl[{item}].PowerMetrics PowerControl[{item}].PowerMetrics.AverageConsumedWatts Member of Power.v1_3_0.Power


Description	The average power level over the measurement window (the last IntervalInMin minutes).
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerMetrics.IntervalInMin Member of Power.v1_3_0.Power


Description	The time interval (or window) in which the PowerMetrics are measured over.
Type	integer or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerMetrics.MaxConsumedWatts Member of Power.v1_3_0.Power


Description	The highest power consumption level that has occured over the measurement window (the last IntervalInMin minutes).
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerMetrics.MinConsumedWatts Member of Power.v1_3_0.Power


Description	The lowest power consumption level over the measurement window (the last IntervalInMin minutes).
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].PowerRequestedWatts Member of Power.v1_3_0.Power


Description	The potential power that the chassis resources are requesting which may be higher than the current level being consumed since requested power includes budget that the chassis resource wants for future use.
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerControl[{item}].RelatedItem (array) Member of Power.v1_3_0.Power

RelatedItem is an array containing elements of:

RelatedItem[{item}].@odata.id Member of Power.v1_3_0.Power


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

PowerControl[{item}].Status Member of Power.v1_3_0.Power See the Redfish standard schema and specification for information on common Status object.

PowerSupplies (array)

Member of Power.v1_3_0.Power

PowerSupplies is an array containing elements of:

PowerSupplies[{item}].@odata.id Member of Power.v1_3_0.Power


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

PowerSupplies[{item}].FirmwareVersion Member of Power.v1_3_0.Power


Description	The firmware version for this Power Supply
Type	string or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].LastPowerOutputWatts Member of Power.v1_3_0.Power


Description	The average power output of this Power Supply
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].LineInputVoltage Member of Power.v1_3_0.Power


Description	The line input voltage at which the Power Supply is operating
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].LineInputVoltageType Member of Power.v1_3_0.Power


Description	The line voltage type supported as an input to this Power Supply
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Unknown`	The power supply line input voltage type cannot be determined.
`ACLowLine`	100-127V AC input.
`ACMidLine`	200-240V AC input.
`ACHighLine`	277V AC input.
`DCNeg48V`	-48V DC input.
`HighVoltageDC`	High Voltage DC input (380V).

PowerSupplies[{item}].Manufacturer Member of Power.v1_3_0.Power


Description	This is the manufacturer of this power supply.
Type	string or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].MemberId Member of Power.v1_3_0.Power


Description	This is the identifier for the member within the collection.
Type	string
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Model Member of Power.v1_3_0.Power


Description	The model number for this Power Supply
Type	string or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.AveragePowerOutputWatts Member of Power.v1_3_0.Power


Description	The latest observed average power being drawn by the power supply (Watts). This is usually updated every 10 seconds but the period can vary in some circumstances.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.BayNumber Member of Power.v1_3_0.Power


Description	The power supply bay number.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.Domain Member of Power.v1_3_0.Power


Description	This indicates the domain of the specific power supply.
Type	string
Read Only	True
Added	iLO6 1.10

The following are the supported values:

Value
`System`
`GPU`

PowerSupplies[{item}].Oem.Hpe.HotplugCapable Member of Power.v1_3_0.Power


Description	If true, this power supply (and power supply bay) is capable of being hot-plugged.
Type	boolean
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.MaxPowerOutputWatts Member of Power.v1_3_0.Power


Description	The latest observed maximum output power being drawn by the power supply (Watts). This is usually updated every 10 seconds but the period can vary in some circumstances.
Type	integer
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.Mismatched Member of Power.v1_3_0.Power


Description	If true, this power supply is mismatched with others in the system.
Type	boolean
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.PowerSupplyStatus PowerSupplies[{item}].Oem.Hpe.PowerSupplyStatus.State Member of Power.v1_3_0.Power


Description	Indicates the known state of the resource.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Unknown`
`Ok`
`Degraded`
`Failed`
`OverVoltage`
`OverCurrent`
`OverTemperature`
`ACPowerLost`
`FanFailure`
`WarningHighInputVoltage`
`WarningLowInputVoltage`
`WarningHighOutputVoltage`
`WarningLowOutputVoltage`
`WarningInletTemperature`
`WarningInternalTemperature`
`WarningHighAuxiliaryVoltage`
`WarningLowAuxiliaryVoltage`
`PowerSupplyMismatch`
`GoodInStandby`

PowerSupplies[{item}].Oem.Hpe.iPDU PowerSupplies[{item}].Oem.Hpe.iPDU.IPAddress Member of Power.v1_3_0.Power


Description	The IP address of the iPDU connected to this power supply.
Type	string or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.iPDU.MacAddress Member of Power.v1_3_0.Power


Description	The Ethernet MAC address of the iPDU connected to this power supply.
Type	string or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.iPDU.Model Member of Power.v1_3_0.Power


Description	The model number of the iPDU connected to this power supply.
Type	string
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.iPDU.SerialNumber Member of Power.v1_3_0.Power


Description	The serial number of the iPDU connected to this power supply.
Type	string
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Oem.Hpe.iPDU.iPDUStatus PowerSupplies[{item}].Oem.Hpe.iPDU.iPDUStatus.State Member of Power.v1_3_0.Power


Description	Indicates the known state of the resource.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Unknown`
`Ok`
`Degraded`
`Failed`
`OverVoltage`
`OverCurrent`
`OverTemperature`
`ACPowerLost`
`FanFailure`
`WarningHighInputVoltage`
`WarningLowInputVoltage`
`WarningHighOutputVoltage`
`WarningLowOutputVoltage`
`WarningInletTemperature`
`WarningInternalTemperature`
`WarningHighAuxiliaryVoltage`
`WarningLowAuxiliaryVoltage`
`PowerSupplyMismatch`
`GoodInStandby`

PowerSupplies[{item}].Oem.Hpe.iPDUCapable Member of Power.v1_3_0.Power


Description	If true, this power supply is capable of being connected to an iPDUs.
Type	boolean
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].PartNumber Member of Power.v1_3_0.Power


Description	The part number for this Power Supply
Type	string or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].PowerCapacityWatts Member of Power.v1_3_0.Power


Description	The maximum capacity of this Power Supply
Type	number or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].PowerSupplyType Member of Power.v1_3_0.Power


Description	The Power Supply type (AC or DC)
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`Unknown`	The power supply type cannot be determined
`AC`	Alternating Current (AC) power supply
`DC`	Direct Current (DC) power supply

PowerSupplies[{item}].Redundancy Member of Power.v1_3_0.Power See the Redfish standard schema and specification for information on common Redundancy object.

PowerSupplies[{item}].RelatedItem (array) Member of Power.v1_3_0.Power

RelatedItem is an array containing elements of:

RelatedItem[{item}].@odata.id Member of Power.v1_3_0.Power


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

PowerSupplies[{item}].SerialNumber Member of Power.v1_3_0.Power


Description	The serial number for this Power Supply
Type	string or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].SparePartNumber Member of Power.v1_3_0.Power


Description	The spare part number for this Power Supply
Type	string or null
Read Only	True
Added	iLO6 1.05

PowerSupplies[{item}].Status Member of Power.v1_3_0.Power See the Redfish standard schema and specification for information on common Status object.

Redundancy

Member of Power.v1_3_0.Power See the Redfish standard schema and specification for information on common Redundancy object.

Status

Member of Power.v1_3_0.Power See the Redfish standard schema and specification for information on common Status object.

Processor

@odata.type: "#Processor.v1_7_2.Processor"

The Processor resource describes the Processor resource. It represents the properties of a processor attached to a System.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/processors/{item}`	GET

InstructionSet


Description	The instruction set of the processor
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`x86`	x86 32-bit
`x86-64`	x86 64-bit
`IA-64`	Intel IA-64
`ARM-A32`	ARM 32-bit
`ARM-A64`	ARM 64-bit
`MIPS32`	MIPS 32-bit
`MIPS64`	MIPS 64-bit
`OEM`	OEM-defined

Manufacturer


Description	The processor manufacturer
Type	string or null
Read Only	True
Added	iLO6 1.05

MaxSpeedMHz


Description	The maximum clock speed of the processor
Type	integer or null
Read Only	True
Added	iLO6 1.05

Model


Description	The product model number of this device
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.AssetTag


Description	The processor asset tag.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Cache (array)

Cache is an array containing elements of:

Cache[{item}].Associativity Member of Processor.v1_7_2.Processor


Description	The associativity of the cache.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`DirectMapped`	Direct Mapped
`2waySetAssociative`	2-way Set-Associative
`4waySetAssociative`	4-way Set-Associative
`FullyAssociative`	Fully Associative
`8waySetAssociative`	8-way Set-Associative
`16waySetAssociative`	16-way Set-Associative
`12waySetAssociative`	12-way Set-Associative
`24waySetAssociative`	24-way Set-Associative
`32waySetAssociative`	32-way Set-Associative
`48waySetAssociative`	48-way Set-Associative
`64waySetAssociative`	64-way Set-Associative
`20waySetAssociative`	20-way Set-Associative
`None`

Cache[{item}].CacheSpeedns Member of Processor.v1_7_2.Processor


Description	The cache speed (ns).
Type	integer or null
Read Only	True
Added	iLO6 1.05

Cache[{item}].CurrentSRAMType (array) Member of Processor.v1_7_2.Processor

CurrentSRAMType is an array containing elements of:

CurrentSRAMType[{item}] Member of Processor.v1_7_2.Processor


Description	The array of supported SRAM attributes currently used by the cache.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`NonBurst`	Non-Burst
`Burst`	Burst
`PipelineBurst`	Pipeline Burst
`Synchronous`	Synchronous
`Asynchronous`	Asynchronous

Cache[{item}].EccType Member of Processor.v1_7_2.Processor


Description	The cache memory ECC type.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`None`	None
`Parity`	Parity
`SingleBitECC`	Single-bit ECC
`MultiBitECC`	Multi-bit ECC

Cache[{item}].InstalledSizeKB Member of Processor.v1_7_2.Processor


Description	The installed cache size (KB).
Type	integer or null
Read Only	True
Added	iLO6 1.05

Cache[{item}].Location Member of Processor.v1_7_2.Processor


Description	The cache location (internal or external).
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Internal`	Internal
`External`	External

Cache[{item}].MaximumSizeKB Member of Processor.v1_7_2.Processor


Description	The maximum cache size (KB).
Type	integer or null
Read Only	True
Added	iLO6 1.05

Cache[{item}].Policy Member of Processor.v1_7_2.Processor


Description	The caching policy.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`WriteThrough`	Write through
`WriteBack`	Write back
`Varies`	Varies with memory address

Cache[{item}].Socketed Member of Processor.v1_7_2.Processor


Description	If true, the cache is a socketed component.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Cache[{item}].Status Member of Processor.v1_7_2.Processor See the Redfish standard schema and specification for information on common Status object.

Cache[{item}].SupportedSRAMType (array) Member of Processor.v1_7_2.Processor

SupportedSRAMType is an array containing elements of:

SupportedSRAMType[{item}] Member of Processor.v1_7_2.Processor


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`NonBurst`	Non-Burst
`Burst`	Burst
`PipelineBurst`	Pipeline Burst
`Synchronous`	Synchronous
`Asynchronous`	Asynchronous

Cache[{item}].SystemCacheType Member of Processor.v1_7_2.Processor


Description	The cache type (unified, instructions, or data).
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Instruction`	Instruction
`Data`	Data
`Unified`	Unified

Oem.Hpe.Characteristics (array)

Characteristics is an array containing elements of:

Characteristics[{item}] Member of Processor.v1_7_2.Processor


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`64Bit`	64-bit Capable
`MultiCore`	Multi-Core
`HwThread`	Hardware Thread
`ExecuteProtection`	Execute Protection
`EnhancedVirtualization`	Enhanced Virtualization
`PowerPerfControl`	Power/Performance Control

Oem.Hpe.ConfigStatus

Oem.Hpe.ConfigStatus.Populated Member of Processor.v1_7_2.Processor


Description	True if the processor socket is populated with a CPU.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.ConfigStatus.State Member of Processor.v1_7_2.Processor


Description	The current state of the processor.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	CPU Enabled
`DisabledByUser`	CPU Disabled by User through BIOS Setup
`DisabledByBios`	CPU Disabled By BIOS (POST Error)
`Idle`	CPU is Idle, waiting to be enabled.

Oem.Hpe.CoresEnabled


Description	The number of enabled cores in the processor.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.ExternalClockMHz


Description	The processor external clock frequency (MHZ), for example, 1000 = 1 GHZ.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.MicrocodePatches (array)

MicrocodePatches is an array containing elements of:

MicrocodePatches[{item}].CpuId Member of Processor.v1_7_2.Processor


Description	The microcode patch CPUID.
Type	string
Read Only	True
Added	iLO6 1.05

MicrocodePatches[{item}].Date Member of Processor.v1_7_2.Processor


Description	The microcode patch date.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

MicrocodePatches[{item}].PatchId Member of Processor.v1_7_2.Processor


Description	The microcode patch ID.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.PartNumber


Description	The processor part number.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.RatedSpeedMHz


Description	The speed of the processor (in MHz) as of the last system boot, for example, 1000 = 1GHz.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.SerialNumber


Description	The processor serial number.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.VoltageVoltsX10


Description	The processor voltage multiplied by 10, for example, 3.3v = 33.
Type	integer or null
Read Only	True
Added	iLO6 1.05

PartNumber


Description	The processor part number.
Type	string or null
Read Only	True
Added	iLO6 1.05

ProcessorArchitecture


Description	The architecture of the processor
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`x86`	x86 or x86-64
`IA-64`	Intel Itanium
`ARM`	ARM
`MIPS`	MIPS
`OEM`	OEM-defined

ProcessorId

ProcessorId.EffectiveFamily Member of Processor.v1_7_2.Processor


Description	The effective Family for this processor
Type	string or null
Read Only	True
Added	iLO6 1.05

ProcessorId.EffectiveModel Member of Processor.v1_7_2.Processor


Description	The effective Model for this processor
Type	string or null
Read Only	True
Added	iLO6 1.05

ProcessorId.IdentificationRegisters Member of Processor.v1_7_2.Processor


Description	The contents of the Identification Registers (CPUID) for this processor
Type	string or null
Read Only	True
Added	iLO6 1.05

ProcessorId.MicrocodeInfo Member of Processor.v1_7_2.Processor


Description	The Microcode Information for this processor
Type	string or null
Read Only	True
Added	iLO6 1.05

ProcessorId.Step Member of Processor.v1_7_2.Processor


Description	The Step value for this processor
Type	string or null
Read Only	True
Added	iLO6 1.05

ProcessorId.VendorId Member of Processor.v1_7_2.Processor


Description	The Vendor Identification for this processor
Type	string or null
Read Only	True
Added	iLO6 1.05

ProcessorType


Description	The type of processor
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`CPU`	A Central Processing Unit
`GPU`	A Graphics Processing Unit
`FPGA`	A Field Programmable Gate Array
`DSP`	A Digital Signal Processor
`Accelerator`	An Accelerator
`OEM`	An OEM-defined Processing Unit

SerialNumber


Description	The processor serial number.
Type	string or null
Read Only	True
Added	iLO6 1.05

Socket


Description	The socket or location of the processor
Type	string or null
Read Only	True
Added	iLO6 1.05

Status

Member of Processor.v1_7_2.Processor See the Redfish standard schema and specification for information on common Status object.

TotalCores


Description	The total number of cores contained in this processor
Type	integer or null
Read Only	True
Added	iLO6 1.05

TotalThreads


Description	The total number of execution threads supported by this processor
Type	integer or null
Read Only	True
Added	iLO6 1.05

ProcessorCollection

@odata.type: "#ProcessorCollection.ProcessorCollection"

A Collection of Processor resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/processors`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	Processor

Members (array)

Member of ProcessorCollection.ProcessorCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of ProcessorCollection.ProcessorCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of ProcessorCollection.ProcessorCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

Role

@odata.type: "#Role.v1_2_1.Role"

This resource defines a user role to be used in conjunction with a Manager Account.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/roles/{item}`	GET PATCH

AssignedPrivileges (array)

Member of Role.v1_2_1.Role

AssignedPrivileges is an array containing elements of:

AssignedPrivileges[{item}] Member of Role.v1_2_1.Role


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Login`	Able to log into the service and read resources.
`ConfigureManager`	Able to configure Manager resources.
`ConfigureUsers`	Able to configure Users and their Accounts.
`ConfigureSelf`	Able to change the password for the current user Account.
`ConfigureComponents`	Able to configure components managed by this service.

IsPredefined

Member of Role.v1_2_1.Role


Description	This property is used to indicate if the Role is one of the Redfish Predefined Roles vs a Custom role.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.GroupDn

Member of Role.v1_2_1.Role


Description	The complete or shortened distinguished name of the directory group.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.GroupSid

Member of Role.v1_2_1.Role


Description	The security identifier of the directory group (for kerberos authentication and Active Directory integration only).
Type	string or null
Read Only	True
Added	iLO6 1.05

OemPrivileges (array)

Member of Role.v1_2_1.Role

OemPrivileges is an array containing elements of:

OemPrivileges[{item}] Member of Role.v1_2_1.Role


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`RemoteConsolePriv`	Able to remotely access the host system Remote Console, including video, keyboard, and mouse control.
`VirtualMediaPriv`	Able to use the Virtual Media feature on the host system.
`VirtualPowerAndResetPriv`	Able to power-cycle or reset the host system. These activities interrupt system availability. A user with this privilege can diagnose the system by using the Generate NMI to System button.
`HostBIOSConfigPriv`	Able to configure Host BIOS Settings.
`HostNICConfigPriv`	Able to configure Host NIC Settings.
`HostStorageConfigPriv`	Able to configure Host Storage Settings.
`SystemRecoveryConfigPriv`	Able to manage the critical recovery firmware images on the Manager's Repository.

RoleId

Member of Role.v1_2_1.Role


Description	This property contains the name of the Role.
Type	string
Read Only	True
Added	iLO6 1.05

RoleCollection

@odata.type: "#RoleCollection.RoleCollection"

A Collection of Role resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/accountservice/roles`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	Role

Members (array)

Member of RoleCollection.RoleCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of RoleCollection.RoleCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of RoleCollection.RoleCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

SecureBoot

@odata.type: "#SecureBoot.v1_1_0.SecureBoot"

This resource contains UEFI Secure Boot information. It represents properties for managing the UEFI Secure Boot functionality of a system.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureboot`	GET POST PATCH

Links to other Resources

Link Name	Destination type
`securebootdatabases`	Collection of SecureBootDatabase

SecureBootCurrentBoot

Member of SecureBoot.v1_1_0.SecureBoot


Description	Secure Boot state during the current boot cycle.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Enabled`	Secure Boot is currently enabled.
`Disabled`	Secure Boot is currently disabled.

SecureBootDatabases

A link to the collection of UEFI Secure Boot databases. SecureBootDatabases is a link ("@odata.id": URI) to another resource.

SecureBootEnable

Member of SecureBoot.v1_1_0.SecureBoot


Description	Enable or disable UEFI Secure Boot (takes effect on next boot).
Type	boolean or null
Read Only	False
Added	iLO6 1.05

SecureBootMode

Member of SecureBoot.v1_1_0.SecureBoot


Description	Current Secure Boot Mode.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`SetupMode`	Secure Boot is currently in Setup Mode.
`UserMode`	Secure Boot is currently in User Mode.
`AuditMode`	Secure Boot is currently in Audit Mode.
`DeployedMode`	Secure Boot is currently in Deployed Mode.

Actions

SecureBoot.ResetKeys Member of SecureBoot.v1_1_0.SecureBoot Action to perform reset of the Secure Boot Keys.

Parameters:

ResetKeysType (string)

This parameter specifies what type of reset action to perform.

Value	Description
ResetAllKeysToDefault	Reset to default Secure Boot keys on next boot.
DeletePK	Delete Secure Boot platform keys on next boot.
DeleteAllKeys	Delete all Secure Boot keys on next boot.

SecureBootDatabase

@odata.type: "#SecureBootDatabase.v1_0_0.SecureBootDatabase"

The SecureBootDatabase schema describes a UEFI Secure Boot database used to store certificates or hashes.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/Systems/{item}/SecureBoot/SecureBootDatabases/PK`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/db`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbdefault`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbr`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbrdefault`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbt`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbtdefault`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbx`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbxdefault`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/kek`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/kekdefault`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/pkdefault`	GET

Links to other Resources

Link Name	Destination type
`Certificates`	Collection of Certificate
`Signatures`	Collection of Signature

Certificates

A link to the collection of certificates contained in this UEFI Secure Boot database. Certificates is a link ("@odata.id": URI) to another resource.

DatabaseId

Member of SecureBootDatabase.v1_0_0.SecureBootDatabase


Description	This property contains the name of the UEFI Secure Boot database.
Type	string
Read Only	True
Added	iLO6 1.10

Signatures

A link to the collection of signatures contained in this UEFI Secure Boot database. Signatures is a link ("@odata.id": URI) to another resource.

Actions

SecureBootDatabase.ResetKeys Member of SecureBootDatabase.v1_0_0.SecureBootDatabase Action to perform reset of the Secure Boot Database Keys.

Parameters:

ResetKeysType (string)

This parameter specifies what type of reset action to perform.

Value	Description
ResetAllKeysToDefault	Reset to default Secure Boot Database keys on next boot.
DeleteAllKeys	Delete all Secure Boot Database keys on next boot.

SecureBootDatabaseCollection

@odata.type: "#SecureBootDatabaseCollection.SecureBootDatabaseCollection"

The collection of SecureBootDatabase resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureboot/securebootdatabases`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	SecureBootDatabase

Members (array)

Member of SecureBootDatabaseCollection.SecureBootDatabaseCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of SecureBootDatabaseCollection.SecureBootDatabaseCollection


Type	string
Read Only	True
Added	iLO6 1.10
Format	uri-reference

Members@odata.count

Member of SecureBootDatabaseCollection.SecureBootDatabaseCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.10

SerialInterface

@odata.type: "#SerialInterface.v1_1_7.SerialInterface"

This is the schema definition for the Serial Interface.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/serialinterfaces/{item}`	GET PATCH

BitRate

Member of SerialInterface.v1_1_7.SerialInterface


Description	The receive and transmit rate of data flow, typically in bits per second (bit/s), over the serial connection.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`9600`	A bit rate of 9600 bit/s.
`19200`	A bit rate of 19200 bit/s.
`38400`	A bit rate of 38400 bit/s.
`57600`	A bit rate of 57600 bit/s.
`115200`	A bit rate of 115200 bit/s.

InterfaceEnabled

Member of SerialInterface.v1_1_7.SerialInterface


Description	An indication of whether this interface is enabled.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

SerialInterfaceCollection

@odata.type: "#SerialInterfaceCollection.SerialInterfaceCollection"

A Collection of SerialInterface resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/serialinterfaces`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	SerialInterface

Members (array)

Member of SerialInterfaceCollection.SerialInterfaceCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of SerialInterfaceCollection.SerialInterfaceCollection


Type	string
Read Only	True
Added	iLO6 1.40
Format	uri-reference

Members@odata.count

Member of SerialInterfaceCollection.SerialInterfaceCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.40

Session

@odata.type: "#Session.v1_0_0.Session"

The Session resource describes a single connection (session) between a client and a Redfish service instance.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/sessionservice/sessions/{item}`	GET DELETE

Oem.Hpe.AccessTime

Member of Session.v1_0_0.Session


Description	User session last-access time
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Oem.Hpe.LoginTime

Member of Session.v1_0_0.Session


Description	User session login time
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Oem.Hpe.MySession

Member of Session.v1_0_0.Session


Description	Indicates whether this is a session I own.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges

Oem.Hpe.Privileges.HostBIOSConfigPriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to configure Host Bios Settings.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges.HostNICConfigPriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to configure Host NIC Settings.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges.HostStorageConfigPriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to configure Host Storage Settings.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges.LoginPriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to log in to the management processor. All local accounts have the login privilege. This privilege is added automatically if it is not specified.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges.RemoteConsolePriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to remotely access the host system Remote Console, including video, keyboard, and mouse control.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges.SystemRecoveryConfigPriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to manage the critical recovery firmware images on the iLO Repository.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges.UserConfigPriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to add, edit, and delete local management processor user accounts. A user with this privilege can change privileges for all users.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges.VirtualMediaPriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to use the Virtual Media feature on the host system.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges.VirtualPowerAndResetPriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to power-cycle or reset the host system. These activities interrupt system availability. A user with this privilege can diagnose the system by using the Generate NMI to System button.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Privileges.iLOConfigPriv Member of Session.v1_0_0.Session


Description	This privilege enables a user to configure most management processor settings, including security settings, and to remotely update the management processor firmware. This privilege does not enable local user account administration.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.UserAccount

Member of Session.v1_0_0.Session


Description	Login details of the user
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.UserDistinguishedName

Member of Session.v1_0_0.Session


Description	LDAP user is identified by its distinguished name (DN).
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.UserExpires

Member of Session.v1_0_0.Session


Description	User session expire time
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Oem.Hpe.UserIP

Member of Session.v1_0_0.Session


Description	IP address of the user
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.UserTag

Member of Session.v1_0_0.Session


Description	Session source
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Web UI`
`RBSU`
`Remote Console`
`SSH`
`IPMI/RMCP`
`SM-CLP`
`RIBCL`
`RESTHost`
`RIBCLHost`
`WSMgmt`
`Telnet`
`Federation`
`USBFrontPort`
`REST`
`Unknown`

Oem.Hpe.UserType

Member of Session.v1_0_0.Session


Description	User type
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Local`
`Directory`
`Single Sign On`
`Kerberos`
`Trusted Key`
`Security Override`
`System`
`Federation`

UserName

Member of Session.v1_0_0.Session


Description	Name to use to log in to the management processor.
Type	string
Read Only	True
Added	iLO6 1.05

SessionCollection

@odata.type: "#SessionCollection.SessionCollection"

A Collection of Session resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/sessionservice/sessions`	GET POST

Links to other Resources

Link Name	Destination type
`Oem/Hpe/Links/MySession`	Session
`Members[]`	Session

Members (array)

Member of SessionCollection.SessionCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of SessionCollection.SessionCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of SessionCollection.SessionCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

SessionService

@odata.type: "#SessionService.v1_0_0.SessionService"

The SessionService resource describes the BMC Redfish Session Service. It represents the properties for the service itself and has links to the actual list of sessions.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/sessionservice`	GET PATCH

Links to other Resources

Link Name	Destination type
`Sessions`	Collection of Session

ServiceEnabled

Member of SessionService.v1_0_0.SessionService


Description	This indicates whether this service is enabled.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

SessionTimeout

Member of SessionService.v1_0_0.SessionService


Description	This is the number of seconds of inactivity that a session may have before the session service closes the session due to inactivity. Here the value 0 means no timeout or infinite timeout.
Type	integer
Read Only	False
Added	iLO6 1.05

Sessions

This property references a Collection resource of Sessions. Sessions is a link ("@odata.id": URI) to another resource.

Status

Member of SessionService.v1_0_0.SessionService See the Redfish standard schema and specification for information on common Status object.

Signature

@odata.type: "#Signature.v1_0_2.Signature"

The Signature schema describes a signature or a hash.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/db/signatures/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbdefault/signatures/{item}`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbr/signatures/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbrdefault/signatures/{item}`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbt/signatures/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbtdefault/signatures/{item}`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbx/signatures/{item}`	GET DELETE
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbxdefault/signatures/{item}`	GET

SignatureString


Description	The string for the signature.
Type	string
Read Only	False
Added	iLO6 1.10

SignatureType


Description	The format of the signature.
Type	string
Read Only	False
Added	iLO6 1.10

SignatureTypeRegistry


Type	string
Read Only	False
Added	iLO6 1.10

The following are the supported values:

Value	Description
`UEFI`	A signature defined in the UEFI Specification.

UefiSignatureOwner


Description	The UEFI signature owner for this signature.
Type	string or null
Read Only	True
Added	iLO6 1.10

SignatureCollection

@odata.type: "#SignatureCollection.SignatureCollection"

The collection of Signature resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/systems/{item}/secureBoot/securebootdatabases/dbdefault/signatures`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/db/signatures`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbr/signatures`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbrdefault/signatures`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbt/signatures`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbtdefault/signatures`	GET
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbx/signatures`	GET POST
`/redfish/v1/systems/{item}/secureboot/securebootdatabases/dbxdefault/signatures`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	Signature

Members (array)

Member of SignatureCollection.SignatureCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of SignatureCollection.SignatureCollection


Type	string
Read Only	True
Added	iLO6 1.10
Format	uri-reference

Members@odata.count

Member of SignatureCollection.SignatureCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.10

SoftwareInventory

@odata.type: "#SoftwareInventory.v1_2_0.SoftwareInventory"

The SoftwareInventory resource describes the inventory of software or firmware components.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/firmwareinventory/{item}`	GET
`/redfish/v1/updateservice/softwareinventory/{item}`	GET

Manufacturer

Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	The manufacturer or producer of this software.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.DeviceClass

Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	DeviceType GUID rendered by iLO for certain items iLO knows how to flash, and omitted for all other items.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.DeviceContext

Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	Friendly text string - same as 'Location' in fw inventory - omitted if not available.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.DeviceInstance

Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	UEFI Device Path if a PCI Device - omitted otherwise.
Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Targets (array)

Member of SoftwareInventory.v1_2_0.SoftwareInventory

Targets is an array containing elements of:

Targets[{item}] Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	A GUID indicating iLO's knowledge of a possible correlation GUIDs vs. components.
Type	string or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Version

Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	NVIDIA CEC Firmware version
Type	string or null
Read Only	True
Added	iLO6 1.30

RelatedItem (array)

Member of SoftwareInventory.v1_2_0.SoftwareInventory

RelatedItem is an array containing elements of:

RelatedItem[{item}].@odata.id Member of SoftwareInventory.v1_2_0.SoftwareInventory


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

RelatedItem@odata.count

Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	The number of items in a collection.
Type	number
Read Only	True
Added	iLO6 1.05

SoftwareId

Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	The implementation-specific label that identifies this software.
Type	string
Read Only	True
Added	iLO6 1.05

Status

Member of SoftwareInventory.v1_2_0.SoftwareInventory See the Redfish standard schema and specification for information on common Status object.

Updateable

Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	This is true if the item is updatable.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Version

Member of SoftwareInventory.v1_2_0.SoftwareInventory


Description	same as 'VersionString' in existing FwSwVersionInventory
Type	string or null
Read Only	True
Added	iLO6 1.05

SoftwareInventoryCollection

@odata.type: "#SoftwareInventoryCollection.SoftwareInventoryCollection"

A Collection of SoftwareInventory resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice/firmwareinventory`	GET
`/redfish/v1/updateservice/softwareinventory`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	SoftwareInventory

Members (array)

Member of SoftwareInventoryCollection.SoftwareInventoryCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of SoftwareInventoryCollection.SoftwareInventoryCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of SoftwareInventoryCollection.SoftwareInventoryCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

Task

@odata.type: "#Task.v1_3_0.Task"

The Task resource describes a specific Task scheduled by or being executed by a Redfish service's Task Service.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/taskservice/tasks/{item}`	GET

EndTime

Member of Task.v1_3_0.Task


Description	The date-time stamp that the task was last completed.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Messages (array)

Member of Task.v1_3_0.Task

Messages is an array containing elements of:

Messages[{item}].Message Member of Task.v1_3_0.Task


Description	This is the human readable message, if provided.
Type	string or null
Read Only	True
Added	iLO6 1.05

Messages[{item}].MessageArgs (array) Member of Task.v1_3_0.Task

MessageArgs is an array containing elements of:

MessageArgs[{item}] Member of Task.v1_3_0.Task


Type	string
Read Only	True
Added	iLO6 1.05

Messages[{item}].MessageId Member of Task.v1_3_0.Task


Description	This is the key for this message which can be used to look up the message in a message registry.
Type	string
Read Only	True
Added	iLO6 1.05

Messages[{item}].RelatedProperties (array) Member of Task.v1_3_0.Task

RelatedProperties is an array containing elements of:

RelatedProperties[{item}] Member of Task.v1_3_0.Task


Type	string
Read Only	True
Added	iLO6 1.05

Messages[{item}].Resolution Member of Task.v1_3_0.Task


Description	Used to provide suggestions on how to resolve the situation that caused the error.
Type	string or null
Read Only	True
Added	iLO6 1.05

Messages[{item}].Severity Member of Task.v1_3_0.Task


Description	This is the severity of the event.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`OK`	Normal
`Warning`	A condition exists that requires attention
`Critical`	A critical condition exists that requires immediate attention

Payload

Payload.HttpHeaders (array) Member of Task.v1_3_0.Task

HttpHeaders is an array containing elements of:

HttpHeaders[{item}] Member of Task.v1_3_0.Task


Type	string
Read Only	True
Added	iLO6 1.05

Payload.HttpOperation Member of Task.v1_3_0.Task


Description	The HTTP operation to perform to execute this Task.
Type	string
Read Only	True
Added	iLO6 1.05

Payload.JsonBody Member of Task.v1_3_0.Task


Description	This property contains the JSON payload to use in the execution of this Task.
Type	string
Read Only	True
Added	iLO6 1.05

Payload.TargetUri Member of Task.v1_3_0.Task


Description	The URI of the target for this task.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

StartTime

Member of Task.v1_3_0.Task


Description	The date-time stamp that the task was last started.
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

TaskMonitor

Member of Task.v1_3_0.Task


Description	The URI of the Task Monitor for this task.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	uri-reference

TaskState

Member of Task.v1_3_0.Task


Description	The state of the task.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`New`	A new task.
`Starting`	Task is starting.
`Running`	Task is running normally.
`Suspended`	Task has been suspended.
`Interrupted`	Task has been interrupted.
`Pending`	Task is pending and has not started.
`Stopping`	Task is in the process of stopping.
`Completed`	Task has completed.
`Killed`	Task was terminated.
`Exception`	Task has stopped due to an exception condition.
`Service`	Task is running as a service.

TaskStatus

Member of Task.v1_3_0.Task


Description	This is the completion status of the task.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`OK`	Normal.
`Warning`	A condition exists that requires attention.
`Critical`	A critical condition exists that requires immediate attention.

TaskCollection

@odata.type: "#TaskCollection.TaskCollection"

A Collection of Task resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/taskservice/tasks`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	Task

Members (array)

Member of TaskCollection.TaskCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of TaskCollection.TaskCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of TaskCollection.TaskCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

TaskService

@odata.type: "#TaskService.v1_1_1.TaskService"

The TaskService resource describes the Task service. It represents the properties for the service itself and has links to the actual list of tasks.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/taskservice`	GET

Links to other Resources

Link Name	Destination type
`Tasks`	Collection of Task

CompletedTaskOverWritePolicy


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Manual`	Completed tasks are not automatically overwritten.
`Oldest`	Oldest completed tasks are overwritten.

DateTime


Description	The current DateTime (with offset) setting that the task service is using.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

LifeCycleEventOnTaskStateChange


Description	Send an Event upon Task State Change.
Type	boolean
Read Only	True
Added	iLO6 1.05

ServiceEnabled


Description	This indicates whether this service is enabled.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

Status

Member of TaskService.v1_1_1.TaskService See the Redfish standard schema and specification for information on common Status object.

Tasks

This property references a resource of type Collection with a MemberType of TaskCollection. Tasks is a link ("@odata.id": URI) to another resource.

TelemetryService

@odata.type: "#TelemetryService.v1_0_0.TelemetryService"

The TelemetryService resource describes the Metrics Service.

Telemetry not supported on AMD platforms

Telemetry Service is supported only on Intel platform. On AMD systems, performing GET on /redfish/v1/TelemetryService will return 400 Error Operation not supported.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/telemetryservice`	GET

Links to other Resources

Link Name	Destination type
`MetricReports`	Collection of MetricReport
`MetricReportDefinitions`	Collection of MetricDefinition
`Triggers`	Collection of Triggers

MaxReports

Member of TelemetryService.v1_0_0.TelemetryService


Description	The maximum number of metric reports supported by this service.
Type	integer or null
Read Only	True
Added	iLO6 1.05

MetricDefinitions

A link to the collection of Metric Definitions. MetricDefinitions is a link ("@odata.id": URI) to another resource.

MetricReportDefinitions

A link to the collection of Metric Reports. MetricReportDefinitions is a link ("@odata.id": URI) to another resource.

MetricReports

A link to the collection of Metric Reports. MetricReports is a link ("@odata.id": URI) to another resource.

MinCollectionInterval

Member of TelemetryService.v1_0_0.TelemetryService


Description	The minimum time interval between collections supported by this service.
Type	string or null
Read Only	True
Added	iLO6 1.05

Status

Member of TelemetryService.v1_0_0.TelemetryService See the Redfish standard schema and specification for information on common Status object.

SupportedCollectionFunctions (array)

Member of TelemetryService.v1_0_0.TelemetryService

SupportedCollectionFunctions is an array containing elements of:

SupportedCollectionFunctions[{item}] Member of TelemetryService.v1_0_0.TelemetryService


Description	An operation to perform over the sample.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Average`	An averaging function.
`Maximum`	A maximum function.
`Minimum`	A minimum function.
`Summation`	A summation function.

Triggers

A link to the collection of Triggers, which apply to metrics. Triggers is a link ("@odata.id": URI) to another resource.

Thermal

@odata.type: "#Thermal.v1_7_1.Thermal"

The Thermal resource describes the system thermal metrics. It represents the properties for temperature and cooling.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/chassis/{item}/thermal`	GET POST PATCH

Fans (array)

Member of Thermal.v1_7_1.Thermal

Fans is an array containing elements of:

Fans[{item}].@odata.id Member of Thermal.v1_7_1.Thermal


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Fans[{item}].CorrelatableID Member of Thermal.v1_7_1.Thermal


Description	The CorrelatableID for this fan.
Type	string or null
Read Only	True
Added	iLO6 1.05

Fans[{item}].LowerThresholdCritical Member of Thermal.v1_7_1.Thermal


Description	Below normal range but not yet fatal.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Fans[{item}].LowerThresholdFatal Member of Thermal.v1_7_1.Thermal


Description	Below normal range and is fatal.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Fans[{item}].LowerThresholdNonCritical Member of Thermal.v1_7_1.Thermal


Description	Below normal range.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Fans[{item}].MaximumValue Member of Thermal.v1_7_1.Thermal


Description	Maximum value for CurrentReading.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Fans[{item}].MemberId Member of Thermal.v1_7_1.Thermal


Description	This is the identifier for the member within the collection.
Type	string
Read Only	True
Added	iLO6 1.05

Fans[{item}].MinimumValue Member of Thermal.v1_7_1.Thermal


Description	Minimum value for CurrentReading.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Fans[{item}].Oem.Hpe.HotPluggable Member of Thermal.v1_7_1.Thermal


Description	Indicates if the fan can be replaced while server is running.
Type	boolean
Read Only	True
Added	iLO6 1.05

Fans[{item}].Oem.Hpe.IsLiquidCooling Member of Thermal.v1_7_1.Thermal


Description	Indicates that the device is Liquid cooling device or not.
Type	boolean
Read Only	True
Added	iLO6 1.05

Fans[{item}].Oem.Hpe.Location Member of Thermal.v1_7_1.Thermal


Description	Indicates the component (i.e. CPU, Memory, and Storage) that the fan is being used to cool.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`System`
`System Board`
`I/O Board`
`CPU`
`Memory`
`Storage`
`Removable Media`
`Power Supply`
`Ambient`
`Chassis`
`Bridge Board`
`Exhaust`
`Processor Bay`
`IO Bay`
`Blade Slot`
`Virtual`

Fans[{item}].Oem.Hpe.Redundant Member of Thermal.v1_7_1.Thermal


Description	Indicates if the fan is in a redundant configuration.
Type	boolean
Read Only	True
Added	iLO6 1.05

Fans[{item}].PhysicalContext Member of Thermal.v1_7_1.Thermal


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Room`	The room
`Intake`	The intake point of the chassis
`Exhaust`	The exhaust point of the chassis
`Front`	The front of the chassis
`Back`	The back of the chassis
`Upper`	The upper portion of the chassis
`Lower`	The lower portion of the chassis
`CPU`	A Processor (CPU)
`GPU`	A Graphics Processor (GPU)
`Backplane`	A backplane within the chassis
`SystemBoard`	The system board (PCB)
`PowerSupply`	A power supply
`VoltageRegulator`	A voltage regulator device
`StorageDevice`	A storage device
`NetworkingDevice`	A networking device
`ComputeBay`	Within a compute bay
`StorageBay`	Within a storage bay
`NetworkBay`	Within a networking bay
`ExpansionBay`	Within an expansion bay
`PowerSupplyBay`	Within a power supply bay

Fans[{item}].Reading Member of Thermal.v1_7_1.Thermal


Description	The current speed of the fan.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Fans[{item}].ReadingUnits Member of Thermal.v1_7_1.Thermal


Description	Units for the CurrentReading.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value
`Null`
`Percent`

Fans[{item}].Status Member of Thermal.v1_7_1.Thermal See the Redfish standard schema and specification for information on common Status object.

Fans[{item}].UpperThresholdCritical Member of Thermal.v1_7_1.Thermal


Description	Above normal range but not yet fatal.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Fans[{item}].UpperThresholdFatal Member of Thermal.v1_7_1.Thermal


Description	Above normal range and is fatal.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Fans[{item}].UpperThresholdNonCritical Member of Thermal.v1_7_1.Thermal


Description	Above normal range.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.FanPercentAdjust

Member of Thermal.v1_7_1.Thermal


Description	System-wide setting for fan +/- percentage adjustment.
Type	integer
Read Only	False
Added	iLO6 1.05

Oem.Hpe.FanPercentMinimum

Member of Thermal.v1_7_1.Thermal


Description	System-wide setting for fan speed minimum percentage.
Type	integer
Read Only	False
Added	iLO6 1.05

Oem.Hpe.ThermalConfiguration

Member of Thermal.v1_7_1.Thermal


Description	The value of this property selects the fan cooling method for the system.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`OptimalCooling`	Provides the most efficient solution by configuring fan speeds to the minimum required to provide adequate cooling.
`IncreasedCooling`	Operates fans at a higher speed.
`MaximumCooling`	Provides the maximum cooling available for the system.
`EnhancedCooling`	Provides additional cooling to the processors, which can improve performance.
`AcousticMode`	Edgeline-only option. Prioritizes minimizing noise from the enclosure.

Status

Member of Thermal.v1_7_1.Thermal See the Redfish standard schema and specification for information on common Status object.

Temperatures (array)

Member of Thermal.v1_7_1.Thermal

Temperatures is an array containing elements of:

Temperatures[{item}].@odata.id Member of Thermal.v1_7_1.Thermal


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Temperatures[{item}].CorrelatableID Member of Thermal.v1_7_1.Thermal


Description	The CorrelatableID for this temperature sensor.
Type	string or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].LowerThresholdCritical Member of Thermal.v1_7_1.Thermal


Description	Below normal range but not yet fatal.
Type	number or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].LowerThresholdFatal Member of Thermal.v1_7_1.Thermal


Description	Below normal range and is fatal.
Type	number or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].LowerThresholdNonCritical Member of Thermal.v1_7_1.Thermal


Description	Below normal range.
Type	number or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].MaximumValue Member of Thermal.v1_7_1.Thermal


Description	Maximum value for CurrentReading.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].MemberId Member of Thermal.v1_7_1.Thermal


Description	This is the identifier for the member within the collection.
Type	string
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].MinimumValue Member of Thermal.v1_7_1.Thermal


Description	Minimum value for CurrentReading.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].Oem.Hpe.CriticalTempUserThreshold Member of Thermal.v1_7_1.Thermal


Description	User provided temperature threshold value for the sensor that results in a critical alert.
Type	integer
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].Oem.Hpe.LocationXmm Member of Thermal.v1_7_1.Thermal


Description	The location of the sensor, in millimeters, along the X axis from the logical reference point.
Type	integer
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].Oem.Hpe.LocationYmm Member of Thermal.v1_7_1.Thermal


Description	The location of the sensor, in millimeters, along the Y axis from the logical reference point.
Type	integer
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].Oem.Hpe.LocationZmm Member of Thermal.v1_7_1.Thermal


Description	The location of the sensor, in millimeters, along the Z axis from the logical reference point.
Type	integer
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].Oem.Hpe.MainSensorName Member of Thermal.v1_7_1.Thermal


Description	Sensor name of main temperature sensor that has atleast one sub sensor
Type	string
Read Only	True
Added	iLO6 1.20

Temperatures[{item}].Oem.Hpe.WarningTempUserThreshold Member of Thermal.v1_7_1.Thermal


Description	User provided temperature threshold value for the sensor that results in a warning alert.
Type	integer
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].PhysicalContext Member of Thermal.v1_7_1.Thermal


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Room`	The room.
`Intake`	The air intake point or points or region of the chassis.
`Exhaust`	The air exhaust point or points or region of the chassis.
`LiquidInlet`	The liquid inlet point of the chassis.
`LiquidOutlet`	The liquid outlet point of the chassis.
`Front`	The front of the chassis.
`Back`	The back of the chassis.
`Upper`	The upper portion of the chassis.
`Lower`	The lower portion of the chassis.
`CPU`	A processor (CPU).
`CPUSubsystem`	The entire processor (CPU) subsystem.
`GPU`	A graphics processor (GPU).
`GPUSubsystem`	The entire graphics processor (GPU) subsystem.
`FPGA`	An FPGA.
`Accelerator`	An accelerator.
`ASIC`	An ASIC device, such as a networking chip or chipset component.
`Backplane`	A backplane within the chassis.
`SystemBoard`	The system board (PCB).
`PowerSupply`	A power supply.
`PowerSubsystem`	The entire power subsystem.
`VoltageRegulator`	A voltage regulator device.
`Rectifier`	A rectifier device.
`StorageDevice`	A storage device.
`NetworkingDevice`	A networking device.
`ComputeBay`	Within a compute bay.
`StorageBay`	Within a storage bay.
`NetworkBay`	Within a networking bay.
`ExpansionBay`	Within an expansion bay.
`PowerSupplyBay`	Within a power supply bay.
`Memory`	A memory device.
`MemorySubsystem`	The entire memory subsystem.
`Chassis`	The entire chassis.
`Fan`	A fan.
`CoolingSubsystem`	The entire cooling, or air and liquid, subsystem.
`Motor`	A motor.
`Transformer`	A transformer.
`ACUtilityInput`	An AC utility input.
`ACStaticBypassInput`	An AC static bypass input.
`ACMaintenanceBypassInput`	An AC maintenance bypass input.
`DCBus`	A DC bus.
`ACOutput`	An AC output.
`ACInput`	An AC input.
`TrustedModule`	A trusted module.
`Board`	A circuit board.
`Transceiver`	A transceiver.
`Battery`	A battery.
`Pump`	A pump.

Temperatures[{item}].ReadingCelsius Member of Thermal.v1_7_1.Thermal


Description	The current reading of the temperature sensor.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].SensorNumber Member of Thermal.v1_7_1.Thermal


Description	A numerical identifier to represent the temperature sensor.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].Status Member of Thermal.v1_7_1.Thermal See the Redfish standard schema and specification for information on common Status object.

Temperatures[{item}].UpperThresholdCritical Member of Thermal.v1_7_1.Thermal


Description	Above normal range but not yet fatal.
Type	number or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].UpperThresholdFatal Member of Thermal.v1_7_1.Thermal


Description	Above normal range and is fatal.
Type	number or null
Read Only	True
Added	iLO6 1.05

Temperatures[{item}].UpperThresholdNonCritical Member of Thermal.v1_7_1.Thermal


Description	The noncritical temperature threshold.
Type	number or null
Read Only	True
Added	iLO6 1.05

Actions

HpeThermalExt.SetUserTempThreshold Member of Thermal.v1_7_1.Thermal The action to set a user defined threshold for a PCIe slot temperature sensor.

Parameters:

AlertType (string)

Alert type thrown when user defined temperature threshold is exceeded.

Value	Description
Critical	Generate a critical alert when user threshold exceeded.
Warning	Generate a warning alert when user threshold exceeded.

SensorNumber (integer)

Sensor number of the sensor to be monitored.

ThresholdValue (integer)

Temperature thershold that once passed will issue an alert.

Triggers

@odata.type: "#Triggers.v1_0_0.Triggers"

The Triggers resource describes the a metric trigger, which apply to metrics.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/telemetryservice/triggers/{item}`	GET PATCH

MetricProperties (array)

Member of Triggers.v1_0_0.Triggers

MetricProperties is an array containing elements of:

MetricProperties[{item}] Member of Triggers.v1_0_0.Triggers


Type	string or null
Read Only	True
Added	iLO6 1.05

MetricType

Member of Triggers.v1_0_0.Triggers


Description	Specifies the type of metric for which the trigger is configured.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Numeric`	The trigger is for numeric sensor.
`Discrete`	The trigger is for a discrete sensor.

NumericThresholds

NumericThresholds.LowerCritical NumericThresholds.LowerCritical.Activation Member of Triggers.v1_0_0.Triggers


Description	The direction of crossing that activates this threshold.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Increasing`	Value increases above the threshold.
`Decreasing`	Value decreases below the threshold.
`Either`	Value crosses the threshold in either direction.

NumericThresholds.LowerCritical.DwellTime Member of Triggers.v1_0_0.Triggers


Description	The time interval over which the sensor reading must have passed through this Threshold value before the threshold is considered to be violated.
Type	string or null
Read Only	False
Added	iLO6 1.05

NumericThresholds.LowerCritical.Reading Member of Triggers.v1_0_0.Triggers


Description	The threshold value.
Type	number or null
Read Only	False
Added	iLO6 1.05

NumericThresholds.LowerWarning NumericThresholds.LowerWarning.Activation Member of Triggers.v1_0_0.Triggers


Description	The direction of crossing that activates this threshold.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Increasing`	Value increases above the threshold.
`Decreasing`	Value decreases below the threshold.
`Either`	Value crosses the threshold in either direction.

NumericThresholds.LowerWarning.DwellTime Member of Triggers.v1_0_0.Triggers


Description	The time interval over which the sensor reading must have passed through this Threshold value before the threshold is considered to be violated.
Type	string or null
Read Only	False
Added	iLO6 1.05

NumericThresholds.LowerWarning.Reading Member of Triggers.v1_0_0.Triggers


Description	The threshold value.
Type	number or null
Read Only	False
Added	iLO6 1.05

NumericThresholds.UpperCritical NumericThresholds.UpperCritical.Activation Member of Triggers.v1_0_0.Triggers


Description	The direction of crossing that activates this threshold.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Increasing`	Value increases above the threshold.
`Decreasing`	Value decreases below the threshold.
`Either`	Value crosses the threshold in either direction.

NumericThresholds.UpperCritical.DwellTime Member of Triggers.v1_0_0.Triggers


Description	The time interval over which the sensor reading must have passed through this Threshold value before the threshold is considered to be violated.
Type	string or null
Read Only	False
Added	iLO6 1.05

NumericThresholds.UpperCritical.Reading Member of Triggers.v1_0_0.Triggers


Description	The threshold value.
Type	number or null
Read Only	False
Added	iLO6 1.05

NumericThresholds.UpperWarning NumericThresholds.UpperWarning.Activation Member of Triggers.v1_0_0.Triggers


Description	The direction of crossing that activates this threshold.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Increasing`	Value increases above the threshold.
`Decreasing`	Value decreases below the threshold.
`Either`	Value crosses the threshold in either direction.

NumericThresholds.UpperWarning.DwellTime Member of Triggers.v1_0_0.Triggers


Description	The time interval over which the sensor reading must have passed through this Threshold value before the threshold is considered to be violated.
Type	string or null
Read Only	False
Added	iLO6 1.05

NumericThresholds.UpperWarning.Reading Member of Triggers.v1_0_0.Triggers


Description	The threshold value.
Type	number or null
Read Only	False
Added	iLO6 1.05

Status

Member of Triggers.v1_0_0.Triggers See the Redfish standard schema and specification for information on common Status object.

TriggerActions (array)

Member of Triggers.v1_0_0.Triggers

TriggerActions is an array containing elements of:

TriggerActions[{item}] Member of Triggers.v1_0_0.Triggers


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`LogToLogService`	Upon a trigger, record in a log.
`RedfishEvent`	Upon a trigger, send a Redfish Event message of type MetricReport.

TriggersCollection

@odata.type: "#TriggersCollection.TriggersCollection"

A Collection of Triggers resource instances.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/telemetryservice/triggers`	GET

Links to other Resources

Link Name	Destination type
`Members[]`	Triggers

Members (array)

Member of TriggersCollection.TriggersCollection

Members is an array containing elements of:

Members[{item}].@odata.id Member of TriggersCollection.TriggersCollection


Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Members@odata.count

Member of TriggersCollection.TriggersCollection


Description	The total number of collection members.
Type	integer
Read Only	True
Added	iLO6 1.05

UpdateService

@odata.type: "#UpdateService.v1_2_1.UpdateService"

The UpdateService resource describes the Update Service. It represents the properties for the service itself and has links to collections of firmware and software inventory.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/updateservice`	GET POST PATCH

Links to other Resources

Link Name	Destination type
`Oem/Hpe/InstallSets`	Collection of HpeComponentInstallSet
`Oem/Hpe/ComponentRepository`	Collection of HpeComponent
`FirmwareInventory`	Collection of SoftwareInventory
`SoftwareInventory`	Collection of SoftwareInventory
`Oem/Hpe/UpdateTaskQueue`	Collection of HpeComponentUpdateTask

FirmwareInventory

Link to Firmware Inventory. FirmwareInventory is a link ("@odata.id": URI) to another resource.

HttpPushUri


Description	The URI to which a client may POST an update image.
Type	string
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Oem.Hpe.Accept3rdPartyFirmware


Description	Enable or disable support for 3rd party firmware update packages.
Type	boolean
Read Only	False
Added	iLO6 1.05

Oem.Hpe.BundleUpdateReport

Link to the Bundle Update report. BundleUpdateReport is a link ("@odata.id": URI) to another resource.

Oem.Hpe.Capabilities

Oem.Hpe.Capabilities.BundleDowngradeSupport Member of UpdateService.v1_2_1.UpdateService


Description	Indicates whether iLO supports downgrade capability for cloud based updates.
Type	boolean
Read Only	True
Added	iLO6 1.10

Oem.Hpe.Capabilities.COMBootToUefiShellSupport Member of UpdateService.v1_2_1.UpdateService


Description	Indicates whether iLO supports booting to Uefi shell for cloud based updates.
Type	boolean
Read Only	True
Added	iLO6 1.40

Oem.Hpe.Capabilities.COMVCSupport Member of UpdateService.v1_2_1.UpdateService


Description	Indicates whether iLO supports pending reset for bundle update.
Type	boolean
Read Only	True
Added	iLO6 1.40

Oem.Hpe.Capabilities.OfflineRuntimeBundleUpdate Member of UpdateService.v1_2_1.UpdateService


Description	Indicates whether iLO supports offline type D installation.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`ProductionMode`	iLO supports offline type D installation in production security state only.
`ProductionAndHighSecurityMode`	iLO supports offline type D installation in Production and High security state only.
`AllModes`	iLO supports offline type D installation in all security states viz, Production, High security, FIPS and CNSA.

Oem.Hpe.Capabilities.PLDMFirmwareUpdate Member of UpdateService.v1_2_1.UpdateService


Description	Indicates whether iLO supports PLDM firmware updates.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Capabilities.UpdateFWPKG Member of UpdateService.v1_2_1.UpdateService


Description	Indicates whether iLO supports FWPKG 2.0 firmware images.
Type	boolean
Read Only	True
Added	iLO6 1.05

Oem.Hpe.ComponentRepository

Link to the Component Repository. ComponentRepository is a link ("@odata.id": URI) to another resource.

Oem.Hpe.CurrentTime


Description	ISO 8601 Redfish-style time string of the current iLO time (the reference for all scheduling)
Type	string
Read Only	True
Added	iLO6 1.05
Format	date-time

Oem.Hpe.DowngradePolicy


Description	Can be used to restrict the firmware downgrade.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`AllowDowngrade`	Downgrading firmware is allowed.
`RecoveryDowngrade`	Downgrading firmware is allowed by a user with the Recovery Set privilege.
`NoDowngrade`	Downgrading firmware is not allowed. This is a permanent setting and cannot be undone.

Oem.Hpe.FirmwareIntegrity

Oem.Hpe.FirmwareIntegrity.EnableBackgroundScan Member of UpdateService.v1_2_1.UpdateService


Description	Enables or disables background scan of critical firmware.
Type	boolean
Read Only	False
Added	iLO6 1.05

Oem.Hpe.FirmwareIntegrity.LastFailedImageUri Member of UpdateService.v1_2_1.UpdateService


Description	This is a link to the binary image of the firmware that failed an integrity check and is intended for diagnostic purposes.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	uri-reference

Oem.Hpe.FirmwareIntegrity.LastScanResult Member of UpdateService.v1_2_1.UpdateService


Description	The firmware integrity scan engine status.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`OK`	The last firmware integrity scan completed without finding any issues.
`Repaired`	The last firmware integrity scan successfully repaired an issue. Refer to the event log for details.
`Failure`	The last firmware integrity scan failed to complete or repair an issue. Refer to the event log for details.
`Stopped`	The last firmware integrity scan was stopped prior to completion. Refer to the event log for details.

Oem.Hpe.FirmwareIntegrity.LastScanTime Member of UpdateService.v1_2_1.UpdateService


Description	The time stamp of the last firmware integrity scan.
Type	string or null
Read Only	True
Added	iLO6 1.05
Format	date-time

Oem.Hpe.FirmwareIntegrity.OnIntegrityFailure Member of UpdateService.v1_2_1.UpdateService


Description	Sets the policy for how the firmware integrity check handles integrity failures.
Type	string
Read Only	False
Added	iLO6 1.05

The following are the supported values:

Value	Description
`LogOnly`	Log failures to the iLO event log but do not automatically attempt to repair.
`LogAndRepairAutomatically`	Log failures to the iLO event log and automatically attempt to repair.

Oem.Hpe.FirmwareIntegrity.ScanEveryDays Member of UpdateService.v1_2_1.UpdateService


Description	Sets the interval between firmware integrity scans in 24 hour increments.
Type	integer or null
Read Only	False
Added	iLO6 1.05

Oem.Hpe.FlashProgressPercent


Description	This is the percent complete for an iLO flash operation. It is only valid when State is Updating.
Type	integer or null
Read Only	True
Added	iLO6 1.05

Oem.Hpe.InstallSets

Link to the Install Sets collection. InstallSets is a link ("@odata.id": URI) to another resource.

Oem.Hpe.InvalidImageRepository

Link to the Invalid Image Repository. InvalidImageRepository is a link ("@odata.id": URI) to another resource.

Oem.Hpe.MaintenanceWindows

Link to the Maintenance Windows. MaintenanceWindows is a link ("@odata.id": URI) to another resource.

Oem.Hpe.Result

Oem.Hpe.Result.MessageArgs (array) Member of UpdateService.v1_2_1.UpdateService

MessageArgs is an array containing elements of:

MessageArgs[{item}] Member of UpdateService.v1_2_1.UpdateService


Type	string
Read Only	True
Added	iLO6 1.05

Oem.Hpe.Result.MessageId Member of UpdateService.v1_2_1.UpdateService


Description	The key for this message that can be used to look up the message in a message registry.
Type	string
Read Only	False
Added	iLO6 1.05

Oem.Hpe.State


Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Idle`	The update service is idle.
`Uploading`	The update service is receiving a new component.
`Verifying`	The update service is verifying the integrity of a new component.
`Writing`	The update service is writing a new component to the iLO Repository.
`Updating`	The update service is updating (flashing) firmware.
`Complete`	The update service has completed up upload or update operation.
`Error`	The upload service encountered an error. See Result for detail.

Oem.Hpe.UpdateTaskQueue

Link to the Update Task Queue. UpdateTaskQueue is a link ("@odata.id": URI) to another resource.

Oem.Hpe.UploadCurrentEtag


Description	client-supplied etag (during component upload) indicating to what UploadStatus is reporting upon.
Type	string
Read Only	True
Added	iLO6 1.05

ServiceEnabled


Description	Indicates if the Update Service is enabled.
Type	boolean or null
Read Only	True
Added	iLO6 1.05

SoftwareInventory

Link to Software Inventory. This is only available when the Agentless Management Service is running. SoftwareInventory is a link ("@odata.id": URI) to another resource.

Actions

UpdateService.SimpleUpdate Member of UpdateService.v1_2_1.UpdateService

Parameters:

Username (string)

The username credential required for authentication to fetch image.

TransferProtocol (string)

Value	Description
HTTP	Hypertext Transfer Protocol
HTTPS	HTTP Secure protocol

ImageURI (string)

Password (string)

The password credential required for authentication to fetch image.

Targets (array)

Target Redfish URI

HpeiLOUpdateServiceExt.DeleteInstallSets Member of UpdateService.v1_2_1.UpdateService

Parameters:

IncludeRecoverySet (boolean)

HpeiLOUpdateServiceExt.DeleteUnlockedComponents Member of UpdateService.v1_2_1.UpdateService There are no parameters for this action.

HpeiLOUpdateServiceExt.DeleteMaintenanceWindows Member of UpdateService.v1_2_1.UpdateService There are no parameters for this action.

HpeiLOUpdateServiceExt.AddFromUri Member of UpdateService.v1_2_1.UpdateService

Parameters:

UpdateTarget (boolean)

If true the action will flash the target.

UpdateRecoverySet (boolean)

If true the action will update the system recovery set if it contains a matching target after the repository is updated.

UploadCurrentEtag (string)

client-supplied etag (during component upload) indicating to what UploadStatus is reporting upon.

VirtualMedia

@odata.type: "#VirtualMedia.v1_3_0.VirtualMedia"

The VirtualMedia resource describes the BMC virtual media feature.

Resource Instances

Uri	HTTP Allow
`/redfish/v1/managers/{item}/virtualmedia/{item}`	GET POST PATCH

ConnectedVia


Description	Specifies how the virtual media is connected to the server.
Type	string or null
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`Null`	A value is temporarily unavailable
`NotConnected`	No current connection.
`URI`	Connected to a URI location.
`Applet`	Connected to a client application.

Image


Description	The valid URI indicating the image that is mounted on this server. A null value indicates that no image exists.
Type	string or null
Read Only	False
Added	iLO6 1.05
Format	uri-reference

ImageName


Description	The name of the image that is mounted on this server. This is usually provided when a URL image is mounted through scripted virtual media.
Type	string or null
Read Only	True
Added	iLO6 1.05

Inserted


Description	Indicates whether the virtual media is mounted on the server.
Type	boolean or null
Read Only	False
Added	iLO6 1.05

MediaTypes (array)

MediaTypes is an array containing elements of:

MediaTypes[{item}] Member of VirtualMedia.v1_3_0.VirtualMedia


Description	The array of supported media types for this connection.
Type	string
Read Only	True
Added	iLO6 1.05

The following are the supported values:

Value	Description
`CD`	A CD-ROM format (ISO) image.
`Floppy`	A floppy disk image.
`USBStick`	An emulation of a USB storage device.
`DVD`	A DVD-ROM format image.

Oem.Hpe.BootOnNextServerReset


Description	If set to true, the server will boot to this image on the next server reboot. The image will be ejected automatically on the second server reboot so that the server does not boot to this image twice.
Type	boolean
Read Only	False
Added	iLO6 1.05

TransferProtocolType


Description	Network Protocol to use with the image
Type	string
Read Only	True
Added	iLO6 1.10

The following are the supported values:

Value	Description
`CIFS`	Common Internet File System protocol.
`FTP`	File Transfer Protocol.
`SFTP`	Secure File Transfer Protocol.
`HTTP`	Hypertext Transfer Protocol.
`HTTPS`	HTTP Secure protocol.
`NFS`	Network File System protocol.
`SCP`	Secure File Copy protocol.
`TFTP`	Trivial File Transfer Protocol.
`OEM`	A protocol defined by the manufacturer.

WriteProtected